1. Product Overview
The Craftmade Westminster 3 Tube Contemporary Chime (Model CE3-WSB) is designed to provide a distinct and adjustable chime for your home's entryways. This unit features a contemporary design with three chime tubes and offers options for 4 or 8 note front door chimes and a single back door chime. The volume is adjustable to suit your preference.
Image showing the Craftmade Westminster 3 Tube Contemporary Chime, featuring three tubes and a white/satin brass finish, designed for wall mounting.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other hazards. Always consult a qualified electrician for installation if you are unsure about any steps.
- Disconnect Power: Always turn off power at the circuit breaker or fuse box before installing, servicing, or cleaning the chime unit.
- Voltage: This chime operates on 120 Volts AC. Ensure your electrical system matches this requirement.
- Transformer: A 16V 30VA transformer (not included) is required for proper operation. Using an incorrect transformer can damage the unit or pose a fire hazard.
- Wiring: Ensure all wiring connections are secure and comply with local electrical codes.
- Mounting: Mount the chime securely to a wall using appropriate hardware.
3. Package Contents
Verify that all components are present before beginning installation:
- Westminster 3 Tube Contemporary Chime Unit (Model CE3-WSB)
- Mounting Hardware (screws, anchors)
- Instruction Manual
Note: A 16V 30VA transformer is required for operation and is sold separately.
4. Setup and Installation
This chime is designed for wall mounting in a vertical orientation. The hole pattern for mounting is 7.56 inches.
4.1 Wiring Requirements
- Power Source: The chime requires a 120 Volt AC power source.
- Transformer: A 16V 30VA transformer is essential for the chime's operation. Connect the transformer to your home's electrical system and then to the chime unit.
- Doorbell Buttons: Connect your front and back doorbell buttons to the appropriate terminals on the chime unit. Refer to the wiring diagram provided with your transformer or doorbell buttons for specific connections.
4.2 Mounting the Chime
- Select Location: Choose a suitable indoor wall location for the chime unit.
- Mark Holes: Use the chime unit as a template to mark the mounting screw locations on the wall. The vertical hole pattern is 7.56 inches.
- Drill Holes: Drill pilot holes if necessary, and insert wall anchors if mounting into drywall.
- Secure Chime: Feed the wiring through the opening in the back of the chime unit. Secure the chime to the wall using the provided mounting screws.
- Connect Wires: Connect the transformer and doorbell button wires to the chime terminals as per the wiring diagram. Ensure all connections are tight and insulated.
- Restore Power: Once all connections are secure and the chime is mounted, restore power at the circuit breaker.
5. Operating Instructions
The Westminster Chime offers distinct sounds for different entryways and adjustable volume.
- Front Door Chime: When the front doorbell button is pressed, the chime will play either a 4-note or 8-note Westminster melody, depending on the internal setting.
- Back Door Chime: When the back doorbell button is pressed, the chime will play a single, distinct note.
- Adjustable Volume: Locate the volume control on the chime unit (typically a small dial or slider). Adjust it to your desired sound level.
6. Maintenance
The Craftmade Westminster Chime requires minimal maintenance.
- Cleaning: Dust the chime unit regularly with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish.
- Inspection: Periodically check the wiring connections to ensure they remain secure.
- No User-Serviceable Parts: The internal components of the chime are not user-serviceable. Do not attempt to open or repair the unit yourself.
7. Troubleshooting
If your chime is not functioning correctly, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chime does not ring at all. |
|
|
| Chime rings continuously or incorrectly. |
|
|
| Sound quality is poor or distorted. |
|
|
If troubleshooting steps do not resolve the issue, contact Craftmade customer support.
8. Specifications
| Manufacturer | Craftmade |
| Part Number | CE3-WSB |
| Item Model Number | CE3-WSB |
| Product Dimensions | 16.14 x 9.13 x 3.35 inches |
| Item Weight | 2.6 pounds |
| Size | Medium |
| Color | White/Satin Brass |
| Style | Modern |
| Material | Plastic |
| Power Source | Corded-electric |
| Voltage | 120 Volts (requires 16V 30VA transformer, not included) |
| Mounting Type | Protruding, Wall mount, Vertical |
| Special Features | Adjustable volume |
| Included Components | Westminster Chime Unit |
| Batteries Required? | No |
9. Warranty and Support
9.1 Manufacturer's Warranty
This Craftmade Westminster 3 Tube Contemporary Chime (Model CE3-WSB) is covered by a 1 Year Manufacturer's Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs.
9.2 Customer Support
For technical assistance, warranty claims, or replacement parts, please contact Craftmade customer support. Have your model number (CE3-WSB) and proof of purchase available when contacting support.
Contact information for Craftmade can typically be found on their official website or on the product packaging.
