SANUS Fixed Height Speaker Stands for Roku Wireless Speakers

Introduction

These SANUS Fixed Height Speaker Stands are specifically designed to provide a secure and stable platform for your Roku Wireless Speakers, enhancing your home audio experience. The stands feature integrated cable management and a sturdy design for optimal sound placement and a clean aesthetic.

What's in the Box

Please verify that all components are present before beginning assembly.

• Bases (2x)
• Tubes (2x)
• Top Collars (2x)
• Bottom Collars (2x)
• Speaker Brackets (2x)
• Bracket Screws (2x)
• Speaker Screws (2x)
• Shaft Screws and Washers (2x)
• Rubber Pads (4x)
• Carpet Spikes and Jam Nuts (4x)

Setup and Installation

A Phillips screwdriver is required for assembly.

1. Slide Collars onto Tubes: Slide the top and bottom collars onto each tube.
2. Attach Tubes to Bases: Securely attach each tube to its respective base using the provided shaft screws and washers.
3. Run Power Cords: Carefully run the speaker power cords through the bases and up through the tubes. Ensure the non-plug end of the cable is fed first.
4. Attach Speaker Bracket: Attach the speaker bracket to the top of each tube using the bracket screws.
5. Connect Speaker: Plug the power cord into your Roku Wireless Speaker. Then, attach the speaker to the bracket using the speaker screws.
6. Position Collars: Slide the top and bottom collars into place to cover the connections and provide a finished look.

Figure 1: SANUS Fixed Height Speaker Stand dimensions: 34.4 inches height, 12.7 inches base width, 10 inches base depth. Includes 5-year limited warranty.

Figure 2: SANUS Speaker Stand base with rubber feet and carpet spikes for versatile placement on various floor types.

Figure 3: Close-up of the SANUS Speaker Stand's integrated cable management system, designed to conceal speaker cables.

Operating Instructions

Once assembled, position the speaker stands in your desired location. The fixed height of 34.4 inches is designed for optimal listening. Ensure the base is stable on your chosen surface. Use the rubber pads for hard floors or carpet spikes for carpeted areas to prevent tipping and enhance stability.

Figure 4: SANUS Speaker Stand with a Roku Wireless Speaker placed next to a sofa, demonstrating optimal listening height and cable management.

Figure 5: Two SANUS Speaker Stands with Roku Wireless Speakers flanking a television and media console in a living room setup.

Maintenance

To maintain the appearance and functionality of your speaker stands, wipe them with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish. Regularly check all screws and connections to ensure they remain tight and secure.

Troubleshooting

• Instability: Ensure all screws are tightened. If on carpet, verify carpet spikes are properly engaged. If on hard floors, ensure rubber pads are correctly installed.
• Visible Cables: Re-route power cords through the internal cable management channel as described in the setup section. Ensure collars are properly seated.
• Speaker Not Secure: Verify that the speaker is correctly attached to the bracket using the provided speaker screws and that these screws are tightened.

Specifications

Warranty and Support

SANUS products are backed by a 5-year limited warranty, reflecting decades of experience in designing premium audio-visual solutions. We are committed to providing the best experience through design, support, and ease of installation.

Customer Support

For any questions or assistance with your SANUS speaker stands, please contact our US-based expert customer care team. They are available 7 days a week.

Phone: 1-800-359-5520