1. Introduction
Thank you for choosing the SunJet Outdoor Rock Water Fountain. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water feature. Please read this manual thoroughly before setup and retain it for future reference.
This outdoor water fountain is designed to create a tranquil and visually appealing focal point in your garden, yard, patio, or deck. It features a natural rock river design with integrated LED lights, providing a soothing ambiance.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Always disconnect the power supply before performing any maintenance or cleaning.
- Ensure the fountain is placed on a stable, level surface to prevent tipping and water spillage.
- Do not operate the pump without water. This can cause damage to the pump.
- Keep children and pets away from the fountain during operation and maintenance.
- Use only the provided power adapter and pump.
- Protect the power cord from sharp objects, excessive heat, and heavy traffic.
- Do not use the fountain in temperatures below freezing, as water can freeze and damage the unit. Drain and store indoors during winter months.
- Ensure all electrical connections are dry and protected from water.
3. Package Contents
Please check to ensure all components are present and undamaged:
- SunJet Outdoor Rock Water Fountain Unit (83.4"L x 22"W x 20"H)
- UL Certified Water Pump
- Power Adapter
- Instruction Manual (this document)
Figure 3.1: Illustration of the fountain's two main sections and their connection points.
4. Setup Instructions
- Unpack Components: Carefully remove all parts from the packaging. Inspect for any damage.
- Choose Location: Select a level, stable outdoor location for your fountain, ensuring it is near a power outlet and away from areas where water splash might cause damage.
- Assemble Fountain Sections: The fountain may come in two main sections. Carefully align and join the two parts of the fountain together as indicated by the arrows or interlocking features. Ensure a secure fit to prevent leaks.
- Install Pump: Place the UL Certified water pump into the designated reservoir area at the bottom of the fountain. Ensure the pump is fully submerged when the fountain is filled with water.
- Connect Tubing: Connect the tubing from the pump outlet to the water inlet on the fountain structure. Ensure a tight connection to prevent leaks.
- Fill with Water: Fill the fountain reservoir with distilled water until the pump is completely submerged and the water level is sufficient for circulation. Do not overfill.
- Connect Power: Plug the power adapter into a grounded outdoor electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
Figure 4.1: Product dimensions for placement planning.
Figure 4.2: Detail of how to join the two fountain sections securely.
5. Operating Instructions
Once the fountain is set up and filled with water:
- Power On: Plug the power adapter into the electrical outlet. The pump will begin circulating water, and the LED lights will illuminate.
- Adjust Water Flow (if applicable): Some pumps may have an adjustable flow rate. Refer to the pump's specific instructions if you wish to modify the water flow.
- Monitor Water Level: Due to evaporation, the water level will decrease over time. Check the water level daily and refill as needed to ensure the pump remains fully submerged.
- Power Off: To turn off the fountain, simply unplug the power adapter from the electrical outlet.
Video 5.1: Demonstration of the SunJet Outdoor Rock Water Fountain in operation, showcasing water flow and LED lights.
6. Maintenance
Regular maintenance will prolong the life and appearance of your fountain:
- Daily: Check water level and refill as necessary.
- Weekly: Clean the fountain and pump. Disconnect power, drain water, and use a soft brush and mild soap to remove any algae or mineral buildup. Rinse thoroughly.
- Monthly: Inspect the pump impeller for debris and clean if necessary. Check tubing for kinks or blockages.
- Seasonal: Before freezing temperatures, drain all water from the fountain and pump. Clean thoroughly and store the fountain indoors in a dry, protected area.
- Water Quality: Use distilled water to minimize mineral buildup and prolong pump life.
Figure 6.1: Regular cleaning helps maintain the fountain's aesthetic and functionality.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not running / Pump not working | No power; Pump clogged; Water level too low; Pump damaged. | Check power connection and GFCI; Clean pump impeller; Add water to submerge pump; Contact support if pump is damaged. |
| Water flow is weak | Low water level; Clogged pump/tubing; Kinked tubing. | Add water; Clean pump and tubing; Straighten tubing. |
| LED lights not working | Loose connection; Damaged LED unit. | Check all light connections; Contact support for replacement if damaged. |
| Water leaking | Improper assembly of sections; Crack in basin; Loose tubing connection. | Ensure fountain sections are securely joined; Inspect for cracks and apply sealant if minor; Tighten tubing connections. |
8. Specifications
- Product Dimensions: 83.4"L x 22"W x 20"H
- Material: Resin
- Color: Green & Grey
- Power Source: Corded Electric
- Special Features: Durable, LED Lights (5 pre-installed white LED lights)
- Pump: UL Certified
Figure 8.1: The SunJet Outdoor Rock Water Fountain in an outdoor environment.
9. Warranty and Support
SunJet products are manufactured with high-quality materials and craftsmanship. For warranty information or technical support, please contact SunJet customer service through the retailer where the product was purchased or visit the official SunJet store online.
For further assistance, please refer to the contact information provided with your purchase documentation.
Figure 9.1: SunJet Official Logo.
