Lerliuo Record Player Stand with Charging Station

Important Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Be cautious during assembly to prevent injury.
• Avoid using liquids near the product, especially the charging station, to prevent electrical hazards.
• Adhere to the maximum weight limit of 150 lbs (68 kg) for safe usage. Overloading can cause damage or instability.
• Ensure all connections for the charging station are secure before use.
• Place the stand on a flat, stable surface to prevent tipping.

Package Contents

Verify that all components are present before beginning assembly. Refer to the included parts list in your package. If any parts are missing or damaged, contact customer support.

Typically includes:

• Wooden panels for top, sides, bottom, and shelves.
• Beech wood legs and associated hardware.
• Charging station unit with power cord.
• Adjustable/removable shelf.
• Assembly hardware (screws, dowels, etc.).
• Instruction manual.

Setup and Assembly Instructions

Assembly is required for this product. Follow the step-by-step instructions provided in the physical manual included with your purchase. The following provides general guidance and highlights key features.

Step 1: Unpack and Identify Parts

Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list in your manual.

Step 2: Assemble the Main Frame

Connect the main wooden panels according to the diagrams in your manual. Ensure all screws are tightened securely but do not overtighten.

Step 3: Attach the Legs

The stand features sturdy beech wood legs. Attach them to the base of the main frame using the reinforced leg shape design and special screws. Ensure the legs are firmly attached and the stand is stable.

Image: Dimensions of the Lerliuo Record Player Stand, highlighting the sturdy beech wood legs.

Image: Detailed view of key features including cable management, adjustable shelf, and leg design.

Step 4: Install Shelves and Dividers

Insert the internal dividers for vinyl record storage. The right side features a removable plate with three adjustable heights. Position this plate as desired for your audio equipment or remove it entirely for larger items.

Step 5: Install the Charging Station

Integrate the charging station into the designated slot on the top surface. Connect the power cord. The stand includes two standard plug sockets and two USB ports for charging devices.

Image: Detail of the charging station with power specifications.

Step 6: Cable Management

Utilize the back hole for cables to route power cords and audio cables neatly, maintaining a tidy appearance and preventing tangles.

Operating Instructions

• Charging Station: Plug the stand's power cord into a wall outlet. Use the two AC outlets (125V/12A) and two USB ports (5V/2A) to power your record player, audio equipment, and charge other devices.
• Record Storage: Organize your vinyl records in the dedicated compartments. The stand can hold up to 220 albums.
• Adjustable Shelf: Adjust the height of the removable shelf on the right side to accommodate different sizes of audio equipment or accessories. To adjust, remove the shelf, reposition the supports, and reinsert the shelf.
• Protective Baffles: The baffles on both sides of the top surface provide an extra layer of protection for your record player, helping to prevent accidental bumps.

Maintenance

• Cleaning: Wipe the stand with a dry cloth to remove dust and dirt. Avoid using abrasive cleaners or excessive moisture, which can damage the finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight and secure. Retighten as necessary.
• Weight Limit: Do not exceed the maximum weight capacity of 150 lbs (68 kg) to maintain structural integrity.

Troubleshooting

• Wobbly Stand:
  • Ensure all assembly screws are fully tightened.
  • Verify the stand is placed on a level surface. If not, use furniture pads under the legs to stabilize.
  • Check if any legs are damaged or improperly installed.
• Charging Station Not Working:
  • Confirm the stand's power cord is securely plugged into a functional wall outlet.
  • Check if the devices you are trying to charge are properly connected to the outlets/USB ports.
  • Ensure the wall outlet itself is receiving power (test with another device).
• Missing or Damaged Parts:
  • Review the package contents against the parts list in your manual.
  • Contact customer support immediately for replacement parts.

Specifications

Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact Lerliuo customer service directly. If you encounter any issues or require assistance, please reach out to the manufacturer's support team.

Manufacturer: Lerliuo

ASIN: B0C612XP97

Date First Available: May 23, 2023