Lemorele TC94
Contents
Lemorele USB C Docking Station (Model: TC94) - User Manual
10-in-1 Triple Display Laptop Hub Multiport Adapter
1. Introduction
Thank you for choosing the Lemorele USB C Docking Station (Model TC94). This 10-in-1 multiport adapter is designed to expand the connectivity of your USB-C enabled laptop, providing multiple display outputs, high-speed data transfer, power delivery, and more. This manual provides detailed instructions for setup, operation, and troubleshooting to ensure optimal performance.

Figure 1: Lemorele 10-in-1 USB C Docking Station with various cables and devices connected.
2. Key Features
The Lemorele TC94 Docking Station offers comprehensive connectivity options:
- 10-in-1 Connectivity: Extends one USB Type-C port to dual HDMI, VGA, 1x USB 3.0, 2x USB 2.0, USB-C Power Charging (max 100W), SD/Micro SD card readers, and 3.5mm Mic/Audio port.
- Triple Display Output: Supports dual monitor setup with 2 HDMI ports and 1 VGA port.
- High Resolution Support: Up to 4K@30Hz on 4K displays when using a single HDMI port (Mac OS and Windows). Supports 1080p@60Hz for VGA or HDMI+VGA combinations.
- Fast Data Transfer: 1x USB 3.0 port (5Gbps) and 2x USB 2.0 ports (480Mbps) for connecting peripherals like keyboards, mice, and USB flash drives.
- SD/TF Card Readers: Browse photos and transfer data via SD/TF slots at speeds up to 104MB/s.
- 100W Power Delivery: Supports up to 100W input and 87W (safe) output to charge your laptop while connecting multiple peripherals. (Note: Power adapter not included. Ensure laptop's USB-C port supports PD protocol and use at least a 65W adapter).
- Plug and Play: No driver installation required for most compatible devices.
- Wide Compatibility: Compatible with most Thunderbolt 3 devices including MacBook Pro/Air, Dell XPS, Lenovo Yoga, Microsoft Surface Book/Go/Laptop, and more. (Ensure laptop's USB-C port supports DisplayPort Alternate Mode).

Figure 2: Diagram illustrating the 10-in-1 port configuration of the docking station.
3. Setup Guide
Follow these steps to set up your Lemorele TC94 Docking Station:
- Connect to Laptop: Plug the USB-C cable of the docking station into a compatible USB-C port on your laptop. Ensure your laptop's USB-C port supports DisplayPort Alternate Mode for video output.
- Power Connection (Optional but Recommended): For stable operation and laptop charging, connect your laptop's power adapter (minimum 65W recommended) to the USB-C Power Delivery (PD) port on the docking station. This port supports up to 100W input and 87W output.
- Connect Peripherals:
- USB Devices: Connect USB flash drives, external hard drives, keyboards, mice, or other USB peripherals to the USB 3.0 (5Gbps) or USB 2.0 (480Mbps) ports.
- SD/TF Cards: Insert SD or Micro SD cards into the dedicated slots for data transfer.
- Audio: Connect headphones or speakers to the 3.5mm audio jack.
- Connect Displays:
- HDMI Displays: Connect up to two HDMI monitors to the HDMI 1 and HDMI 2 ports.
- VGA Display: Connect one VGA monitor to the VGA port.
- You can use a combination of HDMI and VGA for triple display setups.
Video 1: An overview of the Lemorele TC94 USB C Hub, demonstrating its features and connectivity options including USB, SD/TF card readers, audio, and power delivery. It also shows the connection of keyboard and mouse, and multiple monitors.
4. Operating Instructions
4.1 Display Modes
The docking station supports various display modes depending on your operating system:
Windows OS:
- Mirror Mode (A+A+A): All external monitors display the same content as your laptop screen.
- Extended Mode (A+B+C): Each external monitor can display different content, extending your desktop workspace.
- To set the projection mode, press Windows key + P or go to Display Settings in your laptop.
Mac OS:
- Mirror Mode (A+A+A): All external monitors display the same content as your MacBook screen.
- Mirror Extension Mode (A+B+B): Your MacBook screen is A, and all connected external monitors will mirror each other (B).
- Due to macOS limitations (SST mode), true multi-screen extension (A+B+C) is not supported. All external monitor screens will be the same.
- To set the display mode, go to System Preferences > Displays.

Figure 3: Visual representation of mirror and extended display modes for both Mac OS and Windows operating systems.
4.2 Resolution Capabilities
- Single HDMI Port: Supports maximum 4K@30Hz on a 4K display (both Mac OS and Windows).
- Two HDMI Ports Simultaneously: Mac OS supports maximum 4K@30Hz. Windows systems support maximum 1080p@60Hz.
- VGA Port Only or HDMI + VGA Ports: Maximum support is 1080p@60Hz.

Figure 4: Example of Windows laptop connected to a single 4K HDMI monitor and a 1080p VGA monitor via the docking station.

Figure 5: Example of Mac OS laptop connected to two 4K monitors via the docking station.
4.3 Power Delivery
The USB-C PD port allows you to charge your laptop through the docking station. Connect your laptop's original power adapter or a compatible USB-C PD charger (not included) to this port. The docking station can deliver up to 87W of power to your laptop while simultaneously powering connected peripherals.

Figure 6: Illustration of the 100W Power Delivery feature, showing 100W input to the hub and 85W output to the laptop.
4.4 Data Transfer
Utilize the USB 3.0 port for high-speed data transfer (up to 5Gbps) with compatible devices. The USB 2.0 ports are suitable for connecting standard peripherals like keyboards and mice. The SD/TF card slots allow for quick access to memory card content.

Figure 7: A laptop connected to the docking station, demonstrating fast data transfer via the USB 3.0 port to an external hard drive.

Figure 8: The docking station with an SD card inserted, highlighting the SD/TF card slot functionality.
4.5 Audio Output
The 3.5mm audio jack provides audio output. Connect your headphones or speakers to enjoy sound from your laptop through the docking station.

Figure 9: The docking station connected to a laptop and a speaker via the 3.5mm audio port.
5. Maintenance
- Keep the docking station in a dry environment and avoid exposure to extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Avoid dropping or subjecting the device to strong impacts.
- Ensure proper ventilation around the docking station during prolonged use to prevent overheating.
6. Troubleshooting
If you encounter issues with your Lemorele TC94 Docking Station, refer to the common problems and solutions below:
| Problem | Solution |
|---|---|
| No audio output when connecting a 3.5mm audio device. | Please confirm that your laptop's USB-C port supports audio and video output. The hub's 3.5mm audio output follows the HDMI audio output. You may need to switch the laptop's audio output settings to LCD or HDMI audio output. Some monitors may lack audio drivers, which can lead to the 3.5mm audio port not being recognized after connecting to an HDMI monitor. Please use a monitor with HDMI audio capabilities for connection. |
| HUB intermittently disconnecting and not recognizing Ethernet connection. | First check if the Ethernet cable is connected properly and verify that there are no IP address conflicts in the network settings. If the issue persists, it is recommended to download the latest network drivers from the official website to ensure the device operates correctly. |
| Laptop indicates slow charging when I connect the charger. | The HUB itself requires at least 15W of power to operate. It is recommended to use a higher wattage PD power adapter (preferably up to 100W). Ensure there is sufficient power supplied to both the HUB and the laptop, avoiding slow charging issues. |
| No charging indication when connecting the PD power adapter. | Please confirm whether your laptop's USB-C port supports PD charging functionality and check if the power adapter is connected properly. If the issue persists, it is recommended to try connecting a different PD power adapter to rule out compatibility issues with the PD charging protocol. |
| Cannot set a higher resolution when connecting multiple HDMI monitors. | On Windows systems, when connecting multiple HDMI monitors, the maximum supported resolution is 1080p @60Hz. If only one HDMI monitor is connected, the resolution depends on the capabilities of both the laptop and the monitor, with a maximum of 4K @30Hz. On macOS, the maximum supported resolution is 4K @30Hz. |
| No display when connecting to an HDMI monitor. | Please try disconnecting the HUB from the laptop, shutting down the laptop, and then pressing and holding the power button for 40 seconds to discharge any static electricity. After that, reconnect the HUB and try again. |
| External hard drive not recognized or connection unexpectedly drops when transferring data. | An external hard drive may draw more power than the laptop's USB-C port can supply, causing connection issues. It is recommended to use a PD power adapter connected to the HUB's USB-C PD port to ensure stable power supply and prevent connection interruptions. |
| Why can't the SD card be read? | Please check if the SD card is inserted correctly and ensure that the card's file format is compatible with the device. |
| Does the HUB require driver installation before use? | The HUB is a plug-and-play external device and generally does not require manual driver installation. |
| My laptop doesn't have a USB-C port. Can I use a USB-A adapter? | No, using a USB-A adapter to connect the Hub will result in the HDMI and other ports being unable to output audio and video, causing the monitor and other devices to not function properly. |
| Why can't a MacBook achieve triple-screen extended display when connected to multiple HDMI monitors? | macOS does not support MST (Multi-Stream Transport) technology. As a result, only mirroring (AAA) or duplicating the same extended display (ABB) is supported, and triple-screen extended mode is not supported. |
| Does the HUB's HDMI port support other refresh rates? | By default, it supports 1080P @60Hz and 4K @30Hz resolutions. When connecting a single HDMI monitor, the resolution display depends on the laptop's USB-C port and the monitor's supported resolution (e.g., 2560x1440P @144Hz). |
| Can a USB-C monitor be connected? | No, the Hub's USB-C PD port only supports connecting to a PD power adapter, and the USB-C data port only supports connecting storage devices for data transfer. To connect a monitor, please use the HDMI connection. |
| Can the 3.5mm audio port be used for microphone input? | The 3.5mm audio port only supports audio output and does not support microphone input. |
| Does it support connecting USB-C headphones? | The Hub's USB-C port does not support audio output. Please use headphones connected via the USB-A or 3.5mm audio port. |
Table 1: Common Troubleshooting Scenarios and Solutions.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | TC94 |
| Product Dimensions | 5.43 x 1.65 x 0.54 inches |
| Item Weight | 3.14 ounces |
| Brand | Lemorele |
| Color | Black-TC94 |
| Hardware Interface | VGA, USB Type C, HDMI, USB 3.0, USB 2.0 |
| Compatible Devices | Smartphones, Laptops, Mouse/Keyboards, Dell/HP/Lenovo/Samsung, MacBook Pro/Air |
| Power Delivery | Up to 100W input, 87W output (via USB-C PD port) |
| USB 3.0 Ports | 1 (5Gbps) |
| USB 2.0 Ports | 2 (480Mbps) |
| HDMI Ports | 2 (up to 4K@30Hz single, 1080p@60Hz dual on Windows) |
| VGA Port | 1 (up to 1080p@60Hz) |
| Card Reader | SD/Micro SD (up to 104MB/s) |
| Audio Port | 3.5mm Mic/Audio (audio output only) |
8. Warranty and Support
Lemorele products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please contact Lemorele customer support directly.
- Manufacturer: Lemorele
- Seller: Lemorele us
- Technical Assistance Email: support@lemorele.com
- Brand Store: Lemorele Amazon Store
We want you to live without the inconvenience and uncertainty of where your next tech experience is coming from. Our USB C hubs and accessories offer the tech experience you want with zero restrictions. The user-centered philosophy runs in our blood and through our R&D, design, manufacturing, sales, and marketing.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.