1. Introduction
Thank you for choosing the Craftmade 1 Light Universal Ceiling Fan Light Kit. This kit is designed to provide efficient and versatile lighting for your ceiling fan, featuring an integrated dimmable LED with adjustable color temperature options. This manual provides detailed instructions for safe installation, operation, and maintenance of your new light kit.
2. Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker before installation or servicing.
- Read all instructions carefully before beginning installation.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Do not install this light kit in wet or damp locations. It is rated for indoor use only.
- Do not attempt to modify the light kit or its components.
- Always wear safety glasses during installation.
3. Package Contents
Verify that all components are present before beginning installation:
- Universal Ceiling Fan Light Kit (with integrated LED)
- Mounting Hardware (screws, washers, wire nuts)
- Instruction Manual
4. Setup and Installation
This light kit is designed for universal fan mounting. Follow these steps for proper installation:
- Disconnect Power: Before starting, ensure the power to the ceiling fan circuit is turned off at the main circuit breaker.
- Prepare Fan: Remove any existing light kit or cap from the bottom of your ceiling fan. Ensure the fan's wiring is accessible.
- Connect Wiring: Carefully connect the wires from the light kit to the corresponding wires from the ceiling fan. Typically, this involves connecting:
- Black (Live/Hot) wire from light kit to Black (Live/Hot) wire from fan.
- White (Neutral) wire from light kit to White (Neutral) wire from fan.
- Green or Bare Copper (Ground) wire from light kit to Green or Bare Copper (Ground) wire from fan.
- Mount Light Kit: Align the light kit with the mounting holes on the bottom of your ceiling fan. Secure the light kit using the provided screws. Ensure it is firmly attached and no wires are pinched.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: The Craftmade Universal Ceiling Fan Light Kit, showcasing its brushed polished nickel finish, integrated LED dome, and the attached pull chain for operation.
5. Operating Instructions
This light kit features an integrated dimmable LED with adjustable color temperature. Operation is typically controlled via a pull chain or a compatible wall switch/remote (if your fan supports it).
- Turning On/Off: Pull the light kit's pull chain to toggle the light on or off. If connected to a wall switch, use the switch to control power.
- Adjusting Color Temperature: The integrated LED offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To cycle through these options, quickly turn the light off and then back on using the pull chain or wall switch. The light will change to the next color temperature setting.
- Dimming: This light kit is dimmable. If connected to a compatible dimmer switch (sold separately), you can adjust the brightness level. Ensure your dimmer switch is LED-compatible.
6. Maintenance
Regular maintenance will help prolong the life and appearance of your light kit.
- Cleaning: To clean the light kit, ensure power is disconnected. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners or solvents, as they may damage the finish or LED components.
- LED Replacement: The LED in this light kit is integrated and not user-replaceable. If the LED fails, the entire light kit may need to be replaced.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the light kit. Loose wiring connection. Faulty LED. | Check circuit breaker and wall switch. Ensure all wire connections are secure (with power off). Contact Craftmade support if LED is faulty. |
| Light flickers or dims improperly. | Incompatible dimmer switch. Loose wiring. | Ensure dimmer switch is LED-compatible. Check all wiring connections (with power off). |
| Cannot change color temperature. | Incorrect operation. | Ensure you are quickly cycling power off and on to change the setting. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Craftmade |
| Model | Universal Ceiling Fan Light Kit (B0C5Y5M6GS) |
| Color | Brushed Polished Nickel |
| Material | Alloy Steel |
| Style | Contemporary |
| Light Source | Integrated Dimmable LED |
| Wattage | 20 Watt |
| Lumen Output | 1304 Lumens |
| Color Temperature | 3000K / 4000K / 5000K (Selectable) |
| Rating | Indoor Rated |
| Mounting | Universal Fan Mount |
9. Warranty and Support
Craftmade products are manufactured to the highest standards of quality and performance. For warranty information or technical support, please visit the official Craftmade website or contact their customer service department. Please have your product model number (B0C5Y5M6GS) and purchase date available when contacting support.
For more information, visit: Craftmade Store on Amazon
