oneisall 321
oneisall Automatic Cat Feeder User Manual
Model: PFD-002 | Brand: oneisall
Product Overview
The oneisall Automatic Cat Feeder is designed to provide convenient and precise feeding for up to two cats. With its generous 5-liter capacity, dual feeding bowls, and programmable settings, it ensures your pets receive their meals on schedule, promoting healthy eating habits and reducing mealtime conflicts.
Setup Instructions
- Unpack and Assemble: Carefully remove all components from the packaging. Ensure all parts are present: main feeder unit, food hopper, lid, dual stainless steel bowls, and power adapter.
- Clean Components: Wash the food hopper, lid, and stainless steel bowls with mild soap and water. Rinse thoroughly and ensure they are completely dry before assembly to prevent food spoilage. The main unit should only be wiped clean with a damp cloth; do not submerge in water.
- Place Bowls: Insert the two stainless steel bowls into their designated slots at the base of the feeder. The bowls are positioned opposite each other with an 11-inch distance to allow two cats to eat simultaneously without conflict.
- Fill Food Hopper: Open the lid of the food hopper and pour dry kibble into the reservoir. The feeder has a 5L (20 cups) capacity. Ensure kibble size is less than 0.5 inches to prevent clogging.
- Connect Power: Plug the power adapter into the feeder's power port and then into a wall outlet. While the feeder supports battery backup (4*AA batteries, not included), it is recommended to use the cord plug-in for primary power.
- Initial Settings: Use the dial on the front panel to set the current time. Refer to the 'Operating Instructions' section for detailed programming of meal times and portions.
Operating Instructions
Setting Meal Schedules and Portions
- Program Meal Times: Use the control dial to navigate to the 'FEED PLAN' setting. You can program up to 6 meals per day. Select each meal slot and set the desired feeding time.
- Adjust Portions: For each programmed meal, adjust the number of portions. One portion is approximately 10 grams (1/12 cup). The portion amount refers to the kibble dispensed into each bowl.
- Voice Recording: The feeder allows you to record a 10-second voice message. This message will play before each scheduled meal to call your pets. Navigate to the 'REC' setting and follow the on-screen prompts to record your message.
Fair Dispensing Mechanism
The feeder is designed to dispense food evenly into both bowls, ensuring each pet receives the same amount of food per serving. This balanced distribution helps prevent one pet from overeating or dominating the other's food.
Power Outage Backup
In case of a power outage, the feeder can operate on 4*AA batteries (not included) to ensure continuous feeding. This feature provides peace of mind, knowing your pets will be fed even during unexpected power interruptions.
Maintenance
Regular cleaning of your oneisall Automatic Cat Feeder is essential for hygiene and optimal performance. The stainless steel bowls are dishwasher safe for convenient cleaning. The food hopper and lid can be hand-washed with mild soap and water. Ensure all parts are completely dry before reassembly to prevent mold or bacterial growth.
The main feeder unit, which contains electronic components, should never be submerged in water. Wipe its exterior and the food dispensing area with a damp cloth, then dry immediately. Periodically check the food chute for any kibble residue or blockages and clear them gently.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder not dispensing food. | Low food level, clogged chute, power issue, incorrect schedule. | Check food level and refill. Clear any blockages in the chute. Ensure power adapter is securely plugged in or batteries are installed correctly. Verify feeding schedule settings. |
| Food dispensing unevenly. | Kibble size too large, feeder not level. | Ensure kibble size is less than 0.5 inches. Place the feeder on a flat, stable surface. |
| Voice recording not playing. | No recording saved, volume too low. | Re-record your message following the instructions. Check if there's a volume setting and adjust it. |
| Feeder not turning on. | No power, faulty adapter. | Ensure the power adapter is fully inserted into both the feeder and the wall outlet. Try a different outlet. If using batteries, ensure they are new and correctly inserted. |
For more detailed troubleshooting or issues not listed here, please refer to the full User Manual (PDF) available for download or contact customer support.
Product Specifications
- Model Name: PFD-002
- Capacity: 5 Liters / 20 Cups
- Material: Stainless Steel (bowls), Plastic (body)
- Color: Black
- Dimensions (LxWxH): 7.4 x 7.2 x 9.9 inches
- Item Weight: 4.27 pounds (1.94 Kilograms)
- Power Source: AC Adapter (cord plug-in recommended), 4*AA Batteries (backup, not included)
- Meals Per Day: Up to 6
- Portion Size: 1 Portion 2248 10 Grams 2248 1/12 Cup
- Kibble Size Compatibility: Less than 0.5 inch
- Voice Recorder: 10 seconds
- Care Instructions: Dishwasher Safe (bowls)
- Target Species: Cat (Multi Cats recommended)
- Special Features: Portion Control, Timer, Voice Recording, Feeding Schedule
Warranty and Support
The oneisall Automatic Cat Feeder comes with a 2-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use.
For customer support, technical assistance, or warranty claims, please visit the official oneisall store or contact their customer service department. You can find additional resources and the full user manual in PDF format via the following link: User Manual (PDF).
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.