ECONTROLLY BN59-00854A Replacement Remote Control User Manual

Introduction

This manual provides instructions for the ECONTROLLY BN59-00854A replacement infrared remote control. This remote is designed to function as a direct replacement for your original Samsung TV remote, requiring no programming for immediate use. It is compatible with a wide range of Samsung TV models.

Image 1: Front view of the ECONTROLLY BN59-00854A replacement remote control. This image displays the layout of all buttons, including power, number keys, volume, channel, menu, and media controls.

Setup

1. Battery Installation

The remote control requires two (2) AAA ALKALINE batteries for operation. Please follow these steps to install the batteries:

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards or press the latch to open the compartment.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Replace the battery compartment cover until it clicks securely into place.

Important: Do not use rechargeable batteries. Only use AAA ALKALINE batteries. Batteries are not included with the remote control.

Image 2: Angled view of the ECONTROLLY BN59-00854A remote control, showing its ergonomic design. The battery compartment is located on the rear of the device.

Operating Instructions

This remote control operates using infrared technology and is pre-programmed for compatible Samsung TVs. No additional setup or programming is required after battery installation. Simply point the remote control towards your TV and press the desired button.

Key Functions:

• POWER: Turns the TV on or off.
• TV: Switches to TV input.
• Number Buttons (0-9): Directly select channels.
• VOL (+/-): Adjusts the volume level.
• CH (up/down): Changes channels sequentially.
• MUTE: Mutes or unmutes the TV audio.
• SOURCE: Selects input sources (HDMI, AV, etc.).
• MENU: Accesses the TV's main menu.
• Navigation Pad (Up/Down/Left/Right/Enter): Navigates through menus and confirms selections.
• RETURN: Returns to the previous screen or menu.
• EXIT: Exits the current menu or function.
• Media Control Buttons (Play, Pause, Stop, Rewind, Fast Forward, Record): Controls playback of media content.
• Color Buttons (Red, Green, Yellow, Blue): Access specific functions within certain TV menus or applications.
• INFO: Displays information about the current program or input.

Compatible Samsung TV Models

This ECONTROLLY BN59-00854A remote control is compatible with the following Samsung TV models:

• LN46B650T1FXZA
• LN46B650T1F
• PN50B650
• LN40B60
• LN40B650T1FXZA
• PN50B650S1F
• PN58B650
• PN50B650S1FXZA
• LN46B60
• LN55B650T1F
• LN46B650
• LN40B650
• LN55B650
• PN58B650S1F
• LN55B650T1FXZA
• LN40B650T1F
• PN58B650S1FXZA

Maintenance

To ensure the longevity and optimal performance of your remote control, please observe the following maintenance guidelines:

• Cleaning: Wipe the remote control periodically with a soft, dry cloth. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the surface or internal components.
• Battery Replacement: Replace batteries promptly when the remote's responsiveness decreases. Remove batteries if the remote will not be used for an extended period to prevent leakage.
• Storage: Store the remote control in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
• Avoid Drops: Protect the remote from physical impact, as drops can damage internal circuitry.

Troubleshooting

If you experience issues with your remote control, consider the following common solutions:

• Remote Not Responding:
  • Check if the batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new AAA ALKALINE batteries.
  • Ensure there is a clear line of sight between the remote control and the TV's infrared receiver. Obstructions can block the signal.
  • Confirm the remote is pointed directly at the TV.
• Intermittent Functionality:
  • Weak batteries can cause inconsistent performance. Replace them.
  • Ensure no strong light sources (like direct sunlight or bright fluorescent lights) are interfering with the infrared signal.
• Specific Buttons Not Working:
  • This is often a sign of low batteries. Try replacing them.
  • Inspect the button for any physical damage or debris that might be preventing it from pressing correctly.

If problems persist after trying these steps, please refer to the Support section.

Specifications

Support

For any questions or further assistance regarding your ECONTROLLY BN59-00854A replacement remote control, please feel free to contact us. We are committed to providing support for our products.

Please refer to your purchase platform or product packaging for specific contact details.