1. Introduction
This manual provides instructions for the safe and effective use of your Cuifati Bluetooth Remote Control Page Turner P10. This device allows for remote control of various functions on compatible smartphones and tablets, including page turning for e-books and short videos, and camera shutter activation.
2. Product Overview
2.1 Key Features
- Wireless Bluetooth 5.1 connectivity for stable operation.
- Remote control distance up to 10 meters.
- Functions as a page turner for e-books and short video applications.
- Acts as a remote camera shutter button for photos and video recording.
- Compact, wearable ring design for fingertip control.
- Built-in 30mAh rechargeable lithium battery for long endurance.
2.2 Package Contents
- 1 x Cuifati Bluetooth Remote Control Page Turner P10
- 1 x Instruction Manual (this document)

Figure 1: The Cuifati P10 Bluetooth Remote Control Page Turner worn on a finger, showing its compact, ergonomic design.
3. Setup and Pairing
Follow these steps to connect your P10 Remote Control Page Turner to your device:
- Power On: Press and hold the main button on the P10 for 2 seconds. The blue indicator light will illuminate once, indicating the device is powered on and ready for pairing.
- Activate Bluetooth: On your smartphone or tablet, navigate to the Bluetooth settings and ensure Bluetooth is enabled.
- Search for Device: In the list of available Bluetooth devices, search for "Page Turner".
- Pair: Select "Page Turner" to initiate the pairing process. Once connected, the blue indicator light may change or turn off, depending on the device's status.
- iOS Specific Configuration (for iOS 15.0 or higher):
For full functionality on iOS devices running version 15.0 or higher, an additional accessibility setting must be configured:
- Go to Settings.
- Select Accessibility.
- Tap on Touch.
- Select AssistiveTouch.
- Toggle AssistiveTouch to "On". A virtual button (dot) will appear on your screen.
This setting ensures the remote can interact correctly with the iOS system for actions like page turning and camera control.

Figure 2: The P10 remote control ring positioned next to a smartphone displaying an e-book, illustrating its use for remote page turning.
4. Operating Instructions
Once paired, the P10 can be used for various functions:
4.1 Page Turning
For reading e-books or scrolling through short video feeds, the main button on the P10 typically functions as a scroll or page-turn command. Pressing the button will advance to the next page or scroll down the feed. Specific app compatibility may vary, but it supports most mainstream applications.
4.2 Camera Control (Shutter Button)
When using your device's camera application, the P10 acts as a remote shutter button. Pressing the main button will trigger the camera to take a photo or start/stop video recording. This allows for stable self-portraits or group photos without needing to touch your phone.

Figure 3: A close-up view of the P10 remote, emphasizing its single, intuitive control button for various functions.
5. Maintenance
5.1 Charging the Device
The P10 is equipped with a built-in rechargeable lithium battery. When the battery is low, the indicator light may flash or the device may become unresponsive. To charge:
- Locate the Micro USB charging port on the device.
- Connect a standard Micro USB charging cable (not included) to the port.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, wall adapter).
- The indicator light will typically show charging status (e.g., red while charging, off or blue when fully charged).

Figure 4: The P10 remote control ring detached from its base, showing the Micro USB charging port for convenient recharging.
5.2 Care and Storage
- Keep the device dry and away from extreme temperatures.
- Clean with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store in a cool, dry place when not in use.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery. | Charge the device using a Micro USB cable. |
| Cannot pair with phone/tablet. | Bluetooth not enabled on phone; device not in pairing mode; interference. | Ensure Bluetooth is on. Press and hold the P10 button for 2 seconds to enter pairing mode. Move closer to the device. Restart both devices. |
| Remote functions not working on iOS 15.0+. | AssistiveTouch not enabled. | Enable AssistiveTouch in iOS Accessibility settings (see Section 3. Setup and Pairing). |
| Limited range or intermittent connection. | Obstacles between devices; exceeding 10m range; battery low. | Ensure clear line of sight. Stay within 10 meters. Charge the device. |
7. Specifications
| Product Model | P10 |
| Bluetooth Version | 5.1 |
| Remote Control Distance | Up to 10 meters |
| Battery Type | Polymer Lithium Battery |
| Battery Capacity | 30mAh |
| Material | ABS |
| Weight | Approx. 11g |
| Compatible Devices | Smartphones, Tablets (iOS, Android) |
8. Warranty and Support
This product is covered by a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support or inquiries, please contact your retailer or the manufacturer directly.
Manufacturer: Cuifati