JBL JS-65 Speaker Stands for L52 Classic - Instruction Manual

Introduction

Thank you for choosing the JBL JS-65 Speaker Stands. These stands are specifically designed to complement the JBL L52 Classic speakers and are also suitable for a wide range of compact bookshelf speakers with 10-13cm woofers, such as the JBL 4305P. The JS-65 stands provide optimal speaker placement for enhanced audio performance and stability. Please read this manual carefully before assembly and use to ensure proper setup and long-term enjoyment of your audio system.

Package Contents

Before beginning assembly, please verify that all components are present and undamaged.

• 2 x Speaker Stand Top Plates
• 2 x Speaker Stand Base Plates
• 8 x Vertical Support Columns
• Mounting Hardware (screws, washers, Allen wrench)
• 8 x Isolation Feet (for base)

Setup and Assembly

Follow these steps to assemble your JBL JS-65 Speaker Stands. It is recommended to assemble on a soft, clean surface to prevent scratches.

1. Attach Vertical Support Columns to Base Plate: Carefully align the four vertical support columns with the designated holes on the base plate. Secure them using the provided screws and washers. Tighten firmly with the Allen wrench.
2. Attach Top Plate to Vertical Support Columns: Place the top plate onto the assembled vertical columns, ensuring proper alignment. Secure it using the remaining screws and washers. Tighten firmly.
3. Install Isolation Feet: Screw the isolation feet into the threaded holes on the underside of the base plate. Adjust them to ensure the stand is level and stable on your floor surface.
4. Repeat for Second Stand: Follow steps 1-3 to assemble the second speaker stand.

Operating Instructions

Once assembled, position your speaker stands in the desired location. Ensure the floor surface is level and stable. Place your JBL L52 Classic or other compatible bookshelf speakers centrally on the top plate of each stand. The flat top surface provides a secure platform for your speakers. For optimal sound, ensure speakers are at ear level when seated in your primary listening position.

Maintenance

To maintain the appearance and integrity of your speaker stands:

• Cleaning: Wipe the stands with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
• Placement: Avoid placing the stands in direct sunlight or near heat sources, which could affect the finish.

Troubleshooting

If you encounter issues with your speaker stands, refer to the following common solutions:

• Instability/Wobbling:
  • Ensure all assembly screws are securely tightened.
  • Adjust the isolation feet on the base plate to compensate for uneven floor surfaces.
  • Verify that the speaker is centered on the top plate.
• Scratches on Floor:
  • Ensure isolation feet are properly installed and are not damaged.
  • Avoid dragging the stands; lift them when repositioning.

Specifications

Warranty and Support

JBL products are designed for durability and performance. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official JBL website. Keep your proof of purchase for warranty claims.