PRETTYCARE V1 Cordless Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the PRETTYCARE V1 Cordless Vacuum Cleaner. This manual provides important information on the safe operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read this manual thoroughly before first use and keep it for future reference.

Image: The PRETTYCARE V1 Cordless Vacuum Cleaner, showcasing its versatility as both a stick vacuum and a handheld unit, along with its various attachments and digital display.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using your vacuum cleaner:

• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up toxic material (e.g., chlorine bleach, ammonia, drain cleaner).
• Do not use without dust bag and/or filters in place.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up hard or sharp objects such as glass, nails, screws, coins, etc.

3. Package Contents

Please check the contents of your package to ensure all items are present and in good condition:

Image: A detailed diagram showing all components included in the PRETTYCARE V1 Cordless Vacuum Cleaner package.

1. Main Motor (Handheld Unit)
2. Power Adapter
3. Detachable Battery
4. 2 * Filter Screens
5. Wall Mount Bracket
6. Adjustable Metal Tube
7. Powerful Brush Head
8. 2-in-1 Brush Tool
9. Crevice Nozzle

4. Product Overview

The PRETTYCARE V1 is a versatile cordless vacuum cleaner designed for efficient cleaning of various surfaces. Its modular design allows it to be used as a full-size stick vacuum or a compact handheld unit.

Key Features:

• Powerful Suction: Equipped with a 420W brushless motor, offering up to 45,000 Pa suction power.
• Long Runtime: 7*2500mAh detachable battery provides 10-55 minutes of cleaning time.
• Intelligent LED Display: Shows suction level, remaining power, and fault indications in real-time.
• 3 Suction Modes: Easily switch between Low (25kpa), Medium (35kpa), and High (45kpa) modes.
• 5-Stage Filtration System: Includes an additional air filter to capture 99.99% of allergens down to 0.1 microns.
• Large Dustbin: 1.2L capacity dust cup for less frequent emptying.
• LED Electric Brush: Features an anti-tangle comb and LED lights for improved visibility.
• 4-in-1 Versatility: Transforms into a handheld vacuum with various attachments for cleaning cars, sofas, keyboards, curtains, and more.

5. Setup

Assembly:

1. Attach the Powerful Brush Head to the Adjustable Metal Tube. Ensure it clicks securely into place.
2. Connect the Adjustable Metal Tube to the Main Motor (Handheld Unit). Again, ensure a secure click.
3. Insert the Detachable Battery into the Main Motor until it locks.

For handheld use, detach the Adjustable Metal Tube and attach the desired accessory (2-in-1 Brush Tool or Crevice Nozzle) directly to the Main Motor.

Image: Demonstrates the PRETTYCARE V1 vacuum being used with different attachments for various cleaning tasks, including the multi-task electric brush, crevice tool, and 2-in-1 dust brush.

Charging the Battery:

Before first use, fully charge the battery. The battery can be charged while attached to the vacuum or separately.

• Connect the Power Adapter to the charging port on the Main Motor or directly to the Detachable Battery.
• Plug the Power Adapter into a wall outlet.
• The LED display will indicate charging status. A full charge takes approximately 4 to 5 hours.

Image: An illustration highlighting the detachable battery feature and indicating a fast charging time of 4 hours for up to 55 minutes of running time.

Image: Shows two convenient charging methods: charging the vacuum while mounted on the wall bracket, and charging the detached battery separately.

6. Operating Instructions

Power On/Off and Mode Selection:

Press the power button on the Main Motor to turn the vacuum on. The intelligent LED display will light up.

Image: A close-up view of the intelligent LED display, showing battery percentage and indicators for suction modes.

Tap the screen to cycle through the 3 suction modes:

• Low Mode (25kpa): For light dust and extended runtime.
• Medium Mode (35kpa): For general cleaning and moderate debris.
• High Mode (45kpa): For deep cleaning, stubborn dirt, and pet hair on carpets.

Press the power button again to turn the vacuum off.

Image: A woman vacuuming a rug with the PRETTYCARE V1, demonstrating the different suction power levels (45000 Pa, 35000 Pa, 25000 Pa) and their corresponding approximate runtimes.

Cleaning Tips:

• The LED Electric Brush is suitable for both hard floors and carpets. The LED lights illuminate dark areas for thorough cleaning.
• For optimal performance on carpets, use High Mode.
• Utilize the 2-in-1 Brush Tool for upholstery, curtains, and delicate surfaces.
• The Crevice Nozzle is ideal for tight spaces, corners, and car interiors.
• The adjustable metal tube allows for comfortable cleaning at various heights, including high-up areas.

Image: A close-up of the LED electric brush head in action, showing its effectiveness in picking up various types of debris from a floor, with LED lights illuminating the path.

Image: The PRETTYCARE V1 vacuum cleaning various floor types, including short-pile carpet, marble, cement, and wood, demonstrating its versatility across different surfaces.

Image: The PRETTYCARE V1 vacuum standing upright on its own, showcasing its temporary self-standing design for convenient storage or pauses during cleaning.

7. Maintenance

Emptying the Dustbin:

Empty the 1.2L dustbin regularly to maintain optimal suction power. It is recommended to empty it after each use or when the MAX line is reached.

• Hold the Main Motor unit over a trash can.
• Press the dustbin release button (indicated by a finger icon on the image) to open the bottom flap and release the collected debris.
• Close the flap securely after emptying.

Image: A hand demonstrating the one-touch emptying mechanism of the 1.2L washable dustbin, releasing collected debris directly into a trash can.

Cleaning the Filters:

The PRETTYCARE V1 features a 5-stage filtration system, including a HEPA filter. Regular cleaning of the filters is crucial for maintaining performance and air quality.

Image: An exploded view diagram illustrating the 5-stage filtration system, including the sponge filter, high-density filtration system, dust separation technology, cyclone centrifugation technology, and stainless steel honeycomb filter.

• Twist and pull to remove the dustbin and filter assembly from the Main Motor.
• Separate the filter components (stainless steel honeycomb filter, cyclone assembly, and HEPA filter).
• Tap off loose dust from all components over a trash can.
• Rinse the stainless steel honeycomb filter and the HEPA filter under cold running water. Do not use detergent.
• Allow all filter components to air dry completely for at least 24 hours before reassembling and placing them back into the vacuum. Ensure they are completely dry to prevent mold or damage.

Cleaning the Brush Head:

• Turn off the vacuum and detach the Powerful Brush Head.
• Locate the release tab or screw on the side of the brush head to remove the roller brush.
• Remove any tangled hair, threads, or debris from the roller brush and its housing using scissors or a cleaning tool.
• Reinsert the roller brush and secure it in place.

8. Troubleshooting

If you encounter issues with your PRETTYCARE V1 vacuum cleaner, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact PRETTYCARE customer support for assistance.

9. Specifications

10. Warranty and Support

PRETTYCARE is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, PRETTYCARE offers responsive and efficient technical support.

If you have any questions, concerns, or require assistance with your PRETTYCARE V1 Cordless Vacuum Cleaner, please contact PRETTYCARE customer support. You may find contact information on the product packaging, the official PRETTYCARE website, or through your point of purchase.

Please have your model number (V1) and purchase details ready when contacting support to facilitate a quicker resolution.