1. Introduction
Thank you for choosing the Mount-It! Electric Standing Desk Converter MI-8053. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk converter. Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: Mount-It! Electric Standing Desk Converter MI-8053 with dual monitors and integrated USB charging port.
2. Important Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Weight Limits: Do not exceed the maximum weight capacity of 33 lbs (15 kg) for the desk converter. The dual monitor arm supports up to 22 lbs (10 kg) per screen. Exceeding these limits can cause instability and potential damage.
- Height Adjustment: The desk converter's height range is 6.3 inches (16 cm) to 19.3 inches (49 cm). Do not attempt to force the unit beyond these limits.
- Placement: Ensure the converter is placed on a stable, level surface capable of supporting its weight and the weight of all attached equipment.
- Power Cord: Keep the power cord away from heat sources, sharp edges, and moving parts. Do not operate the unit with a damaged cord or plug.
- Children and Pets: Keep children and pets away from the desk converter during operation to prevent accidents.
- Maintenance: Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel for assistance.
3. Package Contents
Verify that all components are present before beginning assembly:
- Electric Standing Desk Converter Unit
- Dual Monitor Mount
- Keyboard Tray
- Assembly Hardware (screws, bolts, tools)
- Power Adapter
- User Manual (this document)
4. Assembly and Setup
The Mount-It! Electric Standing Desk Converter requires minimal assembly. Follow these steps:
4.1. Attach Keyboard Tray
- Carefully unpack all components and place them on a clean, flat surface.
- Locate the keyboard tray and align it with the designated attachment points on the main desk converter unit.
- Secure the keyboard tray using the provided screws and tools. Ensure it is firmly attached.
Image 4.1: Step 1 - Attaching the keyboard tray to the main unit.
4.2. Install Dual Monitor Mount
- Identify the mounting hole on the main desktop surface for the dual monitor mount.
- Insert the monitor mount pole into the hole and secure it from underneath with the provided hardware (e.g., clamp or bolt).
- Attach your VESA-compatible monitors (75x75mm or 100x100mm) to the monitor arms. Ensure monitors do not exceed 32 inches in size or 22 lbs (10 kg) each.
- Adjust the monitor arms for optimal viewing angles and height.
Image 4.2: VESA compatibility (75x75mm, 100x100mm) and maximum monitor size/weight (32 inches, 22 lbs per monitor).
Image 4.3: Step 2 - Attaching the dual monitor mount to the main unit.
4.3. Power Connection
Connect the power adapter to the desk converter's power input and then plug it into a standard electrical outlet.
5. Operating Instructions
5.1. Height Adjustment
The desk converter features an electric motor for smooth height adjustments. Locate the control button on the side of the desktop. Press and hold the button to raise or lower the desk to your desired ergonomic position. The height can be adjusted between 6.3 inches (minimum) and 19.3 inches (maximum).
Image 5.1: Electric height adjustment button and visual representation of the minimum (6.3") and maximum (19.3") height settings.
Image 5.2: The motorized mechanism ensures quiet and smooth height transitions.
Image 5.3: Transitioning between sitting and standing positions for an active workday.
5.2. USB Charging Port
An integrated USB charging port is located on the side of the desktop, near the height adjustment button. Use this port to conveniently charge your mobile devices.
Image 5.4: The integrated USB charging port keeps devices powered.
5.3. Device Channel
The main desktop surface includes a built-in channel designed to securely hold your tablet or smartphone, keeping it within easy view and reach.
6. Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
- Cable Management: Ensure all cables are neatly routed and not pinched or tangled, especially during height adjustments.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk converter does not move. | Power cord is disconnected or power outlet is not working. | Check power connections. Ensure the power adapter is securely plugged into both the unit and the wall outlet. Test the outlet with another device. |
| Desk movement is uneven or noisy. | Overload, loose connections, or obstruction. | Ensure the weight on the desk does not exceed 33 lbs. Check for any obstructions in the lifting mechanism. Verify all assembly screws are tight. |
| USB charging port not working. | Power issue or device compatibility. | Ensure the desk converter is powered on. Try a different USB cable or device. |
8. Specifications
| Model Number | MI-8053 |
| Brand | Mount-It! |
| Product Dimensions (D x W x H) | 32.75" x 35.4" x 19.3" (83.18 cm x 89.9 cm x 49 cm) |
| Desktop Surface Area | 35.4" x 23" (89.9 cm x 58.4 cm) |
| Height Adjustment Range | 6.3" - 19.3" (16 cm - 49 cm) |
| Desk Converter Weight Capacity | 33 lbs (15 kg) |
| Monitor Arm Weight Capacity | 22 lbs (10 kg) per monitor |
| Supported Monitor Size | Up to 32 inches per monitor |
| VESA Compatibility | 75x75mm, 100x100mm |
| Material | Engineered Wood (Top), Alloy Steel (Base) |
| Color | Black |
| Features | Electric height adjustment, Integrated USB charging port, Device channel |
Image 8.1: Detailed dimensions of the desk converter and monitor arms.
9. Warranty and Support
9.1. Warranty Information
This Mount-It! product is covered by a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Mount-It! website.
Note: The "Maximum Weight Recommendation: 120 Pounds" found in some specifications refers to the overall desk it can be placed on, not the converter itself. The converter's weight capacity is 33 lbs, and monitor arms are 22 lbs per screen, as stated in the Important Safety Information.
9.2. Customer Support
If you have any questions, require assistance with assembly, or encounter issues not covered in the troubleshooting section, please contact Mount-It! customer support. Contact information can typically be found on the Mount-It! website or on the product packaging.
You can also visit the Mount-It! Store on Amazon for more product information and support resources.
