1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Craftmade Taylor 24-inch Dual Mount Indoor Ceiling Fan. Please read all instructions thoroughly before beginning installation or use. Retain this manual for future reference.
Figure 1.1: Craftmade Taylor 24-inch Dual Mount Indoor Ceiling Fan, showcasing its white and satin brass finish with integrated LED light.
2. Safety Information
To reduce the risk of electric shock, fire, or personal injury, always follow these basic safety precautions:
- Read all instructions and safety information before installing your fan and save these instructions.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, use a qualified electrician.
- Before you begin, disconnect power by turning off the circuit breakers to the fan and light fixture at the main fuse box.
- Ensure the installation site allows the fan blades to rotate without obstruction.
- The fan must be mounted with a minimum of 7 feet (2.1 meters) clearance from the trailing edge of the blades to the floor.
- Do not operate the fan with damaged blades or housing.
- Do not insert objects into the path of the fan blades.
3. Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, contact Craftmade customer support before proceeding with installation.
- Motor Assembly
- Polycarbonate Blades (Custom Taylor 20")
- Hardware Pack
- Installation Guide
- WIDC Handheld Remote Control
- LED Light Kit (Optional, Dimmable)
- Optional Lens Cover
- 6-inch Downrod
4. Installation and Setup
This ceiling fan is designed for indoor use and offers dual-mount installation options. Refer to the included Installation Guide for detailed, step-by-step instructions.
4.1 Mounting Options
The fan supports two primary mounting configurations:
- Flat Ceiling Mount: For standard, flat ceilings.
- Angled Ceiling Mount: Suitable for ceilings angled up to 23 degrees. For steeper slopes, a separate SMA180XXX adapter is required (sold separately).
Figure 4.1: Side view of the fan, illustrating the mounting mechanism for ceiling installation.
4.2 Electrical Connection
Ensure power is disconnected at the circuit breaker before wiring. Connect the fan's electrical wires to your household wiring according to the provided wiring diagram in the Installation Guide. It is recommended to consult a qualified electrician for proper installation.
4.3 Blade and Light Kit Assembly
Attach the custom Taylor 20-inch polycarbonate blades to the motor assembly. If using the optional LED light kit, follow the instructions to install it and the lens cover. The light kit is dimmable.
Figure 4.2: Visual representation of dual mount options and key features, including the LED light kit and blade design.
5. Operating Instructions
Your Craftmade Taylor ceiling fan can be controlled using the included WIDC handheld remote control or via Wi-Fi enabled smart devices.
5.1 Remote Control Operation
The WIDC handheld remote allows you to control the fan speed, light on/off, light dimming, and fan direction (forward/reverse for summer/winter modes).
- Fan Speed: Use the designated buttons to adjust fan speed (6-speed reversible DC motor).
- Light Control: Press the light button to turn the LED light on or off. Hold the button to dim or brighten the light.
- Fan Direction: A button on the remote controls the fan's rotational direction, optimizing airflow for different seasons.
6. Smart Features and Connectivity
The Craftmade Taylor fan is Wi-Fi enabled and integrates with Smart by Bond for enhanced control and voice activation.
6.1 Wi-Fi Connectivity (Smart by Bond)
Download the Smart by Bond app on your smartphone or tablet. Follow the in-app instructions to connect your fan to your home Wi-Fi network. This enables control of fan functions from your smart device.
6.2 Voice Activation and Smart Home Integration
Once connected via Smart by Bond, your fan can be integrated with popular smart home devices and voice assistants, including Alexa. Refer to the Smart by Bond app or your smart home device's instructions for specific setup procedures to enable voice commands for your fan and light.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Periodically clean the fan housing and blades with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Blade Inspection: Check fan blades for any cracks or damage. Ensure all blade screws are securely tightened.
- Light Kit: The LED light source is designed for long life. If replacement is ever needed, consult a qualified electrician or Craftmade support.
- Tighten Fasteners: Over time, some fasteners may become loose. Check all mounting hardware and blade attachments annually and tighten as necessary.
8. Troubleshooting
If you experience issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control battery low. | Check circuit breaker; Verify all wire connections; Replace remote control battery. |
| Fan wobbles | Loose blade screws; Improperly balanced blades; Loose mounting bracket. | Tighten all blade screws; Use a balancing kit (not included) if necessary; Ensure mounting bracket is secure. |
| Light does not work | Loose wire connection; LED driver issue. | Check light kit wiring; Contact customer support if LED driver is suspected. |
| Remote control not responding | Battery low/dead; Remote not paired with fan. | Replace remote battery; Refer to the Installation Guide for remote pairing instructions. |
| Wi-Fi connectivity issues | Incorrect Wi-Fi password; Router too far; App issues. | Verify Wi-Fi credentials; Move router closer or use a Wi-Fi extender; Reinstall Smart by Bond app. |
9. Specifications
Detailed technical specifications for the Craftmade Taylor 24-inch Dual Mount Indoor Ceiling Fan:
Figure 9.1: Close-up of the fan's motor and blade attachment, highlighting the satin brass finish and polycarbonate blades.
- Model Name: Taylor 24"
- Part Number: TYL24WSB3
- Brand: Craftmade
- Color: White/Satin Brass
- Material: Aluminum, Plastic, Silicon, Steel, Copper (Polycarbonate Shade/Blades)
- Dimensions: 24 x 24 x 16.99 inches (Product)
- Item Weight: 18.74 pounds
- Indoor/Outdoor Usage: Indoor
- Power Source: AC (120 Volts)
- Light Source Type: LED
- Wattage: 18 watts (LED Light)
- Air Flow Capacity: 1505 Cubic Feet Per Minute (CFM)
- Control Method: App, Remote (WIDC Handheld Control, Smart by Bond App)
- Special Features: LED Light, Programmable, Remote Controlled, Timer, Wi-Fi Enabled
- Assembly Required: Yes
- Batteries: Yes (for remote, Alkaline type)
- UPC: 647881249953
10. Warranty and Support
Your Craftmade Taylor ceiling fan is backed by a limited lifetime warranty. For specific details regarding warranty coverage, please refer to the warranty documentation included with your product or visit the official Craftmade website.
For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact Craftmade customer support.
Figure 10.1: Information regarding purchasing from an authorized Craftmade distributor, ensuring product authenticity and support.
When purchasing Craftmade products from an authorized distributor, you receive benefits such as new products in original packaging with all necessary installation and support documents, and products upholding original factory coverage for defects and issues throughout the manufacturer coverage period.
