D-Link DMS-107 7-Port 2.5GB Unmanaged Multi-Gig Gaming Switch User Manual

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your D-Link DMS-107 7-Port 2.5GB Unmanaged Multi-Gig Gaming Switch. The DMS-107 is designed to enhance your network with high-speed connectivity, featuring two 2.5 Gigabit ports and five 1 Gigabit ports, ideal for gaming, high-bandwidth applications, and Wi-Fi 6 networks. Its plug-and-play design ensures easy setup without complex configuration.

2. Safety Information

• Ensure the power adapter voltage matches your local power supply.
• Do not open the device casing; refer servicing to qualified personnel.
• Avoid placing the switch in areas with high humidity, extreme temperatures, or direct sunlight.
• Ensure proper ventilation around the device to prevent overheating.
• Use only the power adapter supplied with the device.

3. Package Contents

Verify that your package contains the following items:

• D-Link DMS-107 7-Port 2.5GB Unmanaged Multi-Gig Gaming Switch
• Power Supply
• Quick Installation Guide (QIG)

If any items are missing or damaged, please contact your local D-Link reseller.

4. Product Overview

4.1 Front Panel

The front panel of the DMS-107 features seven RJ45 Ethernet ports and LED indicators for power and link/activity status.

Figure 1: D-Link DMS-107 Front Panel

LED Indicators:

• Power LED (Green): Indicates the device is powered on.
• Link/Act LEDs (Green/Blue):
  • Green: Indicates a 10/100/1000 Mbps connection.
  • Blue: Indicates a 2.5 Gigabit connection (for ports 6 and 7).
  • Blinking: Indicates network activity.

Ethernet Ports:

• Ports 1-5: 10/100/1000 Mbps RJ45 ports.
• Ports 6-7: 2.5 Gigabit RJ45 ports, supporting 10/100/1000 Mbps and 2.5 Gigabit speeds.

4.2 Rear Panel

The rear panel includes the power input and a grounding point.

Figure 2: D-Link DMS-107 Rear Panel

• 12V === 0.5A Power Input: Connect the provided power adapter here.
• Grounding Point: For optional grounding connection.

5. Setup

The DMS-107 is a plug-and-play device, requiring no software installation or configuration. Follow these steps for quick setup:

1. Placement: Place the switch on a flat, stable surface in a well-ventilated area. Ensure it is away from direct heat sources or excessive moisture.
2. Connect Power: Connect the provided power adapter to the power input on the rear panel of the DMS-107 and then plug the adapter into a power outlet. The Power LED on the front panel will illuminate green.
3. Connect Devices: Connect your network devices (e.g., computers, gaming consoles, NAS, Wi-Fi 6 routers) to any of the RJ45 Ethernet ports using standard Ethernet cables (Cat5e or higher).

   For optimal performance with 2.5 Gigabit devices, use ports 6 and 7. The corresponding Link/Act LED will light up (green for 10/100/1000 Mbps, blue for 2.5 Gigabit) to indicate a successful connection.
4. Verify Connection: Once devices are connected, check the Link/Act LEDs. A solid green or blue light indicates a valid link, and a blinking light indicates data activity.

Figure 3: Typical Network Setup with DMS-107

6. Operating the Switch

The D-Link DMS-107 is an unmanaged switch, meaning it operates automatically without requiring user configuration. Simply connect your devices, and the switch will handle data traffic efficiently.

6.1 Auto-Negotiation

The switch automatically detects the link speed of connected devices (10 Mbps, 100 Mbps, 1000 Mbps, or 2.5 Gigabit) and adjusts accordingly for optimal performance and compatibility.

6.2 Quality of Service (QoS)

The DMS-107 supports IEEE 802.1p QoS, which allows the switch to prioritize network traffic based on its importance. This ensures that time-sensitive applications like online gaming or video streaming receive preferential bandwidth, minimizing lag and buffering.

6.3 Energy-Efficient Ethernet (EEE)

The switch incorporates IEEE 802.3az Energy-Efficient Ethernet technology, which reduces power consumption during periods of low network activity. This feature helps conserve energy and lower operating costs without affecting performance.

Figure 4: Durable, Quiet, and Energy-Efficient Design

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners.
• Ventilation: Ensure that the ventilation openings on the sides of the switch are not blocked to allow for proper heat dissipation.
• Firmware: As an unmanaged switch, the DMS-107 typically does not require firmware updates.

8. Troubleshooting

9. Specifications

10. Warranty and Support

D-Link products are backed by a limited lifetime warranty. For detailed warranty information, technical support, or to register your product, please visit the official D-Link website or contact D-Link customer support.

D-Link Support: www.dlink.com/support

Figure 5: D-Link Limited Lifetime Warranty

11. Product Videos