Dragonhawk X2 Wireless Tattoo Pen Machine User Manual

Introduction

This user manual provides comprehensive instructions for the safe and effective operation, setup, and maintenance of your Dragonhawk X2 Wireless Tattoo Pen Machine. Designed for both beginners and experienced artists, the X2 offers a user-friendly experience with advanced features for precise tattooing.

Safety Information

• Always ensure the machine is fully charged before use to avoid interruptions during tattooing.
• Use only sterile, single-use cartridge needles. Dispose of used needles properly in a sharps container.
• Maintain strict hygiene protocols. Clean and disinfect the machine and all reusable components before and after each use.
• Do not use the included practice ink on human skin. It is intended for practice skin only.
• Keep the machine away from water and excessive moisture. The device is water-resistant, not waterproof.
• Store the machine and accessories in a clean, dry place, out of reach of children.
• If the machine exhibits unusual behavior, excessive heat, or damage, discontinue use immediately and contact customer support.

Package Contents

Your Dragonhawk X2 Wireless Tattoo Pen Kit includes the following items:

• Dragonhawk X2 Wireless Tattoo Pen Machine
• USB Type-C Charging Cable
• Assorted Cartridge Needles (20 pcs)
• Practice Skin
• Grip Cover
• Black Ink (5ml, for practice only)
• Ink Cups (10 pcs)
• Gloves (1 pair)
• Dragonhawk Symbol Bracelet
• Stickers

Image: Complete Dragonhawk X2 Wireless Tattoo Pen Kit, showing the machine, needles, ink, and accessories.

Image: Detailed layout of the Dragonhawk X2 kit components, including the pen, charging cable, cartridge needles, practice skin, grip cover, ink, ink cups, and gloves.

Product Overview

The Dragonhawk X2 Wireless Tattoo Pen is crafted from aluminum alloy using precision CNC technology, ensuring durability and ease of maintenance. It features an advanced direct drive system for smooth, precise, and quiet operation. The integrated digital display provides real-time voltage and battery information.

Image: The Dragonhawk X2 Tattoo Pen Machine, highlighting its sleek design and user-friendly interface.

Image: A hand holding the Dragonhawk X2 Tattoo Pen, demonstrating its ergonomic design and low center of gravity for stability during use.

Setup

1. Charging the Device

Before initial use, fully charge your Dragonhawk X2 Wireless Tattoo Pen. The device features a 1700mAh battery, providing 7-8 hours of working time on a 2-hour charge.

1. Connect the provided USB Type-C charging cable to the charging port on the top of the tattoo pen.
2. Plug the other end of the cable into a compatible USB power adapter (not included).
3. The display will indicate charging status. Once fully charged, the battery indicator will show full.

Image: Visual representation of the Dragonhawk X2's 1700mAh high-capacity battery, showing charging time and working time.

2. Installing Cartridge Needles

The X2 machine is compatible with standard cartridge needles.

1. Ensure the machine is powered off.
2. Carefully insert the desired cartridge needle into the front opening of the machine.
3. Twist the cartridge clockwise until it clicks securely into place.
4. To adjust needle depth, rotate the grip of the machine.

Image: Various types of Dragonhawk cartridge needles (M, RL, RM, RS) compatible with the X2 machine.

3. Filling Ink Cups

Use the provided ink cups for your tattoo ink. Remember, the included black ink is for practice skin only.

1. Place ink cups on a clean, stable surface.
2. Carefully pour your desired tattoo ink into the ink cups.

Operating Instructions

1. Powering On/Off

• To power on the machine, press and hold the power button (⑂) for a few seconds until the display illuminates.
• To power off, press and hold the power button again until the display turns off.

Image: Close-up of the Dragonhawk X2's control panel, showing the power button and voltage adjustment buttons.

2. Adjusting Voltage

The X2 allows for precise 0.1V voltage adjustments, ranging from 5V to 12V.

• Use the "+" button to increase the voltage.
• Use the "-" button to decrease the voltage.
• The current voltage is displayed on the LCD screen.

3. Instant Start-up Mode

This mode provides a quick start for the machine, useful for certain needle configurations or preferences.

• To enable Instant Start-up Mode, press and hold the "⑂" (power) and "-" (voltage down) buttons simultaneously for 2 seconds. The display will show "E1".
• To disable Instant Start-up Mode, repeat the same action. The display will show "E0".

Image: Instructions for activating and deactivating the Instant Start-up Mode on the Dragonhawk X2, showing "E1" for enabled and "E0" for disabled.

4. Color Background Light Indicators

The X2 features a color-changing background light that indicates the current voltage range:

• Red: 10V-12V
• Purple: 9V-9.9V
• Blue: 8V-8.9V
• Orange: 6V-7.9V
• Green: 5V-5.9V

Image: The Dragonhawk X2 displaying different background light colors corresponding to various voltage ranges.

5. General Operation

Once set up, the X2 is ready for use. The custom Mcore-A Motor provides stable voltage and low noise, suitable for both lining and shading.

Maintenance

1. Cleaning the Machine

Regular cleaning is crucial for the longevity and hygienic operation of your tattoo pen.

• Always power off and disconnect the machine before cleaning.
• Wipe down the exterior of the machine with a clean cloth dampened with an approved tattoo equipment disinfectant.
• Do not submerge the machine in liquid or allow liquids to enter the internal components.
• The X2 is designed for easy disassembly for thorough cleaning and maintenance of parts. Refer to detailed disassembly guides if necessary.

2. Storage

• Store the machine in its original packaging or a protective case when not in use.
• Keep it in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Image: Visual display of the Dragonhawk X2's key parameters, including weight, length, grip size, motor type, stroke, speed, operating voltage, battery capacity, and charging method.

Warranty and Support

For warranty information, technical support, or any inquiries regarding your Dragonhawk X2 Wireless Tattoo Pen Machine, please refer to the official Dragonhawk Tattoo website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.