Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your VASAGLE LCT215K01 Lift-Top Coffee Table. Please read it thoroughly before assembly and use to ensure safe and proper handling of the product.
Safety Information
- Do not allow children to climb on or play with the coffee table for safety reasons.
- Ensure all screws and fasteners are securely tightened during assembly and periodically check for tightness.
- Do not exceed the maximum static load capacity of 91 kg (200 lbs).
- Avoid placing hot items directly on the surface without protection.
Package Contents
Before beginning assembly, verify that all components are present. The package should contain:
- 1 x VASAGLE LCT215K01 Lift-Top Coffee Table
- 1 x Accessory Pack (containing all necessary hardware)
- 1 x Instruction Manual
Setup and Assembly
Assembly of the VASAGLE LCT215K01 coffee table is designed to be straightforward. Follow the numbered steps provided in the included instruction manual. All parts are marked for easy identification.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Match each component with the corresponding labels in the assembly diagram.
- Assemble Frame: Begin by attaching the metal frame components using the provided screws and tools. Ensure all connections are firm.
- Install Storage Shelves: Secure the open storage shelves to the frame.
- Attach Lift-Top Mechanism: Install the lift-top mechanism (hinges and springs) to the main table body according to the diagrams. Pay close attention to the orientation.
- Secure Tabletop: Attach the tabletop sections to the lift mechanism and the fixed part of the table.
- Final Check: Once assembled, gently test the lift-top function and ensure all screws are tightened.
Image: Dimensions and lift mechanism overview.
Operating Instructions
Lift-Top Function
The VASAGLE LCT215K01 features an adjustable lift-top mechanism, allowing the tabletop to be raised and extended forward for various activities.
- To Lift: Gently pull the front edge of the tabletop upwards and forward. The integrated metal hinges and springs will assist in the smooth lifting motion. Use both hands for balanced lifting.
- To Lower: Carefully push the tabletop down and back into its original position. Ensure no objects are obstructing the mechanism or the hidden storage compartment.
Image: Demonstrating the lift-top mechanism.
Storage Compartments
This coffee table offers both open and hidden storage solutions.
- Open Compartments: Three open compartments are located beneath the main tabletop, providing easy access for books, magazines, or decorative items.
- Hidden Storage: A spacious compartment is located directly beneath the lift-top section. This area is ideal for storing items you wish to keep out of sight, such as remote controls, blankets, or small electronics.
Image: Hidden and open storage in use.
Maintenance
Proper care will ensure the longevity and appearance of your coffee table.
- Cleaning: The surface of the table is waterproof. To clean, simply wipe with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Spills: Wipe up spills immediately to prevent potential damage, although the surface is designed to be water-resistant.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Mechanism Care: Keep the lift mechanism free of dust and debris. Lubrication is generally not required but can be applied sparingly to hinges if movement becomes stiff.
Image: Table surface durability and cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tabletop is difficult to lift or lower smoothly. | Mechanism not properly aligned or lubricated; uneven force applied. | Ensure the mechanism is free of obstructions. Apply even pressure with both hands when lifting/lowering. Check for loose screws in the hinge assembly. |
| Table feels wobbly or unstable. | Loose fasteners; uneven floor. | Check and tighten all screws and bolts. Ensure the table is placed on a level surface. Adjust foot pads if available. |
| Screws do not tighten or strip during assembly. | Incorrect screw size/type used; over-tightening; pre-drilled hole issue. | Ensure you are using the correct screws for each step. Do not over-tighten. If a hole is stripped, contact customer support for replacement parts or advice. |
Specifications
| Brand | VASAGLE |
| Model Number | LCT215K01 (Manufacturer Ref: 0194343184180) |
| Color | Vintage Brown + Black |
| Dimensions (L x W x H) | 120 x 60 x (48-62) cm |
| Material | Engineered Wood, Alloy Steel Frame |
| Item Weight | 31 kg (68.3 lbs) |
| Maximum Static Load Capacity | 91 kg (200 lbs) |
| Features | Lift-top mechanism, Hidden storage, Open storage, Waterproof surface |
| Care Instructions | Wipe with a damp cloth |
Warranty and Support
VASAGLE products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official VASAGLE website.
If you encounter any issues during assembly or use, or if you require replacement parts, please contact VASAGLE customer support. Have your model number (LCT215K01) and purchase details ready when contacting support.
You can often find support contact information on the VASAGLE Brand Store on Amazon or through their official website.
