1. Introduction
Thank you for choosing the Faber HOOD ALPHA In HC PB FL BK 60 Kitchen Chimney. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Safety Information
Always adhere to the following safety precautions to prevent injury or damage to the appliance.
- Ensure the electrical supply matches the voltage specified on the rating label.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without the filter in place.
- Regularly clean the chimney to prevent grease buildup, which can be a fire hazard.
- Do not flambé under the chimney.
- Keep children away from the appliance during operation.
- Disconnect the power supply before any cleaning or maintenance.
3. Product Overview
The Faber HOOD ALPHA In HC PB FL BK 60 is a 60 cm wall-mounted kitchen chimney featuring auto-clean technology and a powerful 1100 m³/hr suction capacity. It is designed to effectively remove smoke and odors from your kitchen environment.

Figure 3.1: Front view of the Faber HOOD ALPHA In HC PB FL BK 60 Kitchen Chimney.
Components
- Chimney Unit (Main Body)
- Ducting Pipe (not always included, check packaging)
- Mounting Brackets and Screws
- User Manual
4. Setup and Installation
This chimney is designed for wall-mounted installation. It is highly recommended to have the installation performed by a professional technician to ensure proper functioning and safety.

Figure 4.1: Chimney dimensions for installation planning. Dimensions are approximately 41D x 60W x 49H Centimeters.
Installation Steps (Professional Installation Recommended)
- Site Preparation: Choose a suitable wall location above your cooking range, ensuring adequate clearance from the stove and surrounding cabinets. Mark drilling points based on the chimney's mounting bracket.
- Mounting: Drill holes and securely fasten the mounting brackets to the wall using appropriate screws and wall plugs.
- Chimney Mounting: Carefully lift and mount the chimney unit onto the secured brackets. Ensure it is level and stable.
- Ducting Connection: Connect the exhaust ducting pipe from the chimney outlet to the external vent. Ensure the ducting is sealed properly to prevent air leakage.
- Electrical Connection: Connect the chimney to a grounded electrical outlet. Ensure the power supply is off during this step.
- Final Checks: Verify all connections are secure and the chimney is properly installed before turning on the power.
5. Operation
The Faber HOOD ALPHA In HC PB FL BK 60 chimney is operated via a user-friendly push-button control panel.

Figure 5.1: Push-button control panel for the chimney.
Control Panel Functions
- Power Button (①): Turns the chimney ON/OFF.
- Speed Control Buttons (Fan Icons): Adjusts the suction speed (low, medium, high) to suit your cooking needs. The chimney offers 3-speed rapid suction capacity.
- Light Button (Light Bulb Icon): Turns the integrated LED lamp ON/OFF for illuminated cooking.
- Auto-Clean Button (Water Drop Icon): Initiates the auto-clean cycle.
Auto-Clean Technology
The chimney features Heat Auto-Clean technology with an oil collector. To activate, press the dedicated auto-clean button on the control panel. The chimney will heat the internal components, melting accumulated oil and grease, which then collects in a removable oil collector tray. This process simplifies cleaning and maintains suction efficiency.

Figure 5.2: Activating the auto-clean function with a push of a button.
Suction Capacity
With a powerful 1100 m³/hr suction capacity, this chimney is suitable for kitchen sizes from 100 to 200 sqft and effective for heavy frying and grilling. Adjust the suction speed based on the intensity of cooking fumes.

Figure 5.3: The chimney's powerful suction capacity keeping the kitchen fresh.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your chimney.
General Cleaning
- Wipe the exterior surfaces with a soft, damp cloth and mild detergent. Avoid abrasive cleaners.
- Clean the oil collector tray regularly. Remove it, empty the collected oil, and wash with warm soapy water.
- Ensure the chimney is completely dry before reconnecting power.
Filterless Technology
This chimney utilizes filterless technology, which means it does not have traditional mesh filters that require frequent manual cleaning. Instead, it relies on the auto-clean function to manage oil and grease accumulation. This design ensures smoke and odor are instantly eliminated without the hassle of filter maintenance.

Figure 6.1: The filterless technology ensures efficient smoke and odor elimination.
7. Troubleshooting
Refer to the table below for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney not turning on | No power supply; Loose connection; Faulty switch | Check power outlet; Ensure plug is secure; Contact service for switch replacement. |
| Low suction power | Oil collector full; Blocked ducting; Incorrect speed setting | Empty and clean oil collector; Check ducting for obstructions; Increase fan speed. |
| Unusual noise during operation | Loose components; Motor issue; Obstruction in fan | Ensure all parts are secure; Contact service for motor inspection; Check for foreign objects. |
| Auto-clean not working | Electrical issue; Sensor malfunction | Ensure power supply is stable; Contact service for inspection. |
If the problem persists after attempting these solutions, please contact Faber customer support.
8. Specifications
Detailed technical specifications for the Faber HOOD ALPHA In HC PB FL BK 60 Kitchen Chimney.
| Feature | Specification |
|---|---|
| Model | HOOD ALPHA IN HC PB FL BK 60 |
| Type | Curved glass, Wall mounted, Heat Auto-Clean Chamber |
| Size | 60 cm |
| Finish | Black Finish |
| Control Type | Push Button |
| Suction Capacity | 1100 m³/hr |
| Noise Level | 58 dB |
| Power | 240W |
| Lamp Type | 1 LED of 1.5W |
| Filter Type | Filterless Technology |
| Material | Glass |
| Item Weight | 9 kg |
| Product Dimensions (LxWxH) | 41D x 60W x 49H Centimeters |
| Voltage | 220 Volts |
| Country of Origin | India |
9. Warranty and Support
Faber provides comprehensive warranty coverage for your peace of mind.
- Motor Warranty: 8 years on the motor.
- Comprehensive Product Warranty: 2 years on the entire product.
For installation services, technical assistance, or warranty claims, please contact Faber customer support at:
Customer Service Contact: 1800-209-3484
Please have your product model number and purchase details ready when contacting support.