Introduction
The Kanto S10 is a low-profile, angled stand designed to optimize the acoustic performance and ergonomics of your sound bar or center channel speaker. This stand features a 12-degree upward tilt to direct sound towards the listener, reducing reflections and enhancing clarity. Constructed from solid steel with foam padding, it also helps to decouple the speaker from the furniture surface, minimizing unwanted vibrations.
This manual provides essential information for the proper setup, operation, and maintenance of your Kanto S10 speaker stand.
Setup
The Kanto S10 speaker stand comes pre-assembled, requiring no tools for setup. Follow these steps for optimal placement:
- Placement: Position the S10 stand on a flat, stable surface where your sound bar or center channel speaker will reside. Ensure the angled portion faces the listening area.
- Speaker Positioning: Carefully place your sound bar or center channel speaker onto the S10 stand. The stand is designed to accommodate speakers between 5.5 to 6.9 inches deep and 16 to 36 inches wide.
- Stability Check: Verify that the speaker is securely seated on the stand and that the entire setup is stable.
Image: A soundbar positioned on the Kanto S10 stand, demonstrating how the stand elevates and angles the speaker for improved sound projection.
Image: A center channel speaker resting on the Kanto S10 stand, highlighting the upward tilt that directs audio towards the listener.
Operating Principles
The Kanto S10 stand is designed to enhance your audio experience through passive acoustic and ergonomic improvements:
- Optimized Sound Projection: The 12-degree upward tilt points your speaker directly towards your ears, ensuring an on-axis response. This minimizes sound reflections from furniture surfaces, which can otherwise reduce audio clarity and detail.
- Vibration Reduction: The integrated foam padding and bent metal construction work together to decouple the speaker from the surface it rests on. This design reduces the transmission of vibrations into the furniture and room, leading to cleaner, more accurate sound reproduction.
- Improved Ergonomics: The low-profile design of the S10 allows for lower television placement compared to taller pedestal-style speaker stands. This can result in a more comfortable viewing position, reducing potential neck strain.
Image: A side profile of the Kanto S10 stand, clearly showing its 12-degree upward angle designed to optimize sound direction.
Image: A center channel speaker on the Kanto S10 stand, illustrating how the stand's design and foam padding help minimize rattling and vibrations.
Maintenance
To maintain the appearance and functionality of your Kanto S10 speaker stand, follow these simple guidelines:
- Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For more stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents, as these can damage the finish.
- Inspection: Periodically check the foam padding for any signs of wear or damage. While durable, prolonged use or heavy speakers may cause minor compression.
Troubleshooting
If you encounter any issues with your Kanto S10 stand, consider the following:
- Speaker Instability: If your speaker feels unstable or prone to tipping, especially if it is 'forward heavy', ensure its dimensions (depth and width) fall within the recommended range of 5.5-6.9 inches deep and 16-36 inches wide. Reposition the speaker to balance its weight distribution on the stand.
- Damaged Foam Padding: In rare cases, the foam padding may appear squished or damaged upon unboxing. While this typically does not affect performance if the speaker is stable, contact Kanto support if you believe it impacts the stand's functionality or aesthetics significantly.
Specifications
Image: The Kanto S10 stand with measurements indicating its length, width, height, and the depth of the angled support.
| Feature | Detail |
|---|---|
| Model Name | S10 |
| Item Model Number | KO-S10 |
| Speaker Type Compatibility | Center Channel, Sound Bar |
| Material | Solid Steel |
| Color | Black |
| Upward Tilt Angle | 12 degrees |
| Compatible Speaker Depth | 5.5" - 6.9" (14 cm - 17.5 cm) |
| Compatible Speaker Width | 16" - 36" (40.6 cm - 91.4 cm) |
| Product Dimensions (L x W x H) | 17.44 x 7.2 x 1.69 inches (44.3 x 18.3 x 4.3 cm) |
| Item Weight | 2.2 pounds (1 kg) |
| Special Features | Low profile design, Foam padding for resonance reduction |
Warranty
The Kanto S10 speaker stand is covered by a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Kanto website or contact Kanto customer support.
Support
For further assistance, technical support, or inquiries about your Kanto S10 speaker stand, please visit the official Kanto website or contact their customer service department. You can find more information and contact details at Kanto's Amazon Store.
