Hotpoint NDB 10736 WA IT Washer Dryer User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Hotpoint NDB 10736 WA IT free-standing washer dryer. This appliance offers a 10 kg washing capacity and a 7 kg drying capacity, with a spin speed of 1400 revolutions per minute. Please read these instructions carefully before using the appliance and keep them for future reference.

Figure 1: Front view of the Hotpoint NDB 10736 WA IT washer dryer.

2. Safety Information

For your safety and to ensure proper use, observe all warnings and precautions outlined in this section.

• Always disconnect the appliance from the power supply before cleaning or maintenance.
• Do not allow children to play with the appliance. Supervise children when the appliance is in use.
• Ensure the appliance is properly earthed.
• Do not touch the appliance with wet hands or feet.
• Do not use flammable liquids near the appliance.
• Keep pets away from the appliance.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

3. Setup and Installation

3.1 Unpacking

Carefully remove all packaging materials. Ensure all transit bolts are removed from the rear of the appliance before use. Keep packaging materials out of reach of children.

3.2 Positioning

Place the washer dryer on a firm, level floor. Adjust the feet to ensure stability and proper leveling. Ensure there is adequate space around the appliance for ventilation and access.

Figure 2: Side view of the Hotpoint NDB 10736 WA IT washer dryer, illustrating its dimensions and free-standing placement.

3.3 Water Connection

Connect the water inlet hose to a cold water tap. Ensure all connections are tight to prevent leaks. The drain hose should be securely placed into a standpipe or sink, ensuring it is not kinked.

3.4 Electrical Connection

Plug the appliance into a properly earthed electrical socket. Verify that the voltage and frequency match the specifications on the rating plate of the appliance.

Figure 3: Rear view of the washer dryer, highlighting connection points for water and electricity.

4. Operating Instructions

4.1 Control Panel Overview

The control panel features a program selector knob, a digital display, and various function buttons for temperature, spin speed, and special options.

Figure 4: Detailed view of the control panel, indicating program selection and function controls.

4.2 Loading Laundry

Open the door and load laundry into the drum. Do not overload the machine. For optimal washing and drying results, ensure clothes can move freely. Close the door firmly.

4.3 Adding Detergent and Additives

Pull out the detergent dispenser drawer. Add the appropriate amount of detergent to the main wash compartment and fabric softener to its designated compartment. Refer to detergent packaging for dosage recommendations.

4.4 Selecting a Program

Turn the program selector knob to choose the desired wash or wash&dry program. The digital display will show the default settings for the selected program. Adjust temperature and spin speed using the corresponding buttons if needed.

4.5 Starting a Cycle

Press the 'Start/Pause' button to begin the selected cycle. The indicator light will illuminate, and the cycle will start.

4.6 Special Features

• Steam-Hygiene: This option eliminates up to 99% of bacteria by purifying laundry with steam at the end of the wash cycle, even at low temperatures.
• Digital Motion Technology: The inverter motor ensures precise control of drum movements, effectively removing stains and caring for fabrics.
• Wool Care: A gentle cycle approved by The Woolmark Company for washing wool garments, maintaining their original softness.
• Stop&Add: Allows you to add forgotten items to the wash cycle within the first few minutes without compromising performance.
• Delayed Start: Set the appliance to start a cycle at a later time, up to 24 hours.

5. Maintenance

5.1 Cleaning the Detergent Dispenser

Regularly clean the detergent dispenser drawer to prevent residue buildup. Pull out the drawer, rinse it under running water, and clean any stubborn deposits with a brush. Reinsert the drawer.

Figure 5: The detergent dispenser drawer, illustrating its compartments for cleaning.

5.2 Cleaning the Filter

Locate the filter at the bottom front of the appliance. Place a shallow container underneath to catch any water. Unscrew the filter cover, remove the filter, and clean it under running water. Reinsert and secure the cover.

5.3 Drum Cleaning

Periodically run a high-temperature wash cycle with no laundry and a descaling agent to clean the drum and remove any residue or odors.

6. Troubleshooting

Consult the table below for common issues and their potential solutions before contacting customer service.

7. Specifications

• Model Number: NDB10736WAIT
• Brand: Hotpoint
• Type: Free-standing Washer Dryer
• Washing Capacity: 10 kg
• Drying Capacity: 7 kg
• Maximum Spin Speed: 1400 rpm
• Energy Efficiency Class (Wash&Dry): D
• Dimensions (DxWxH): 60.5 cm x 59 cm x 85 cm
• Weight: 70 kg
• Drum Material: Stainless Steel
• Control Type: Knob
• Voltage: 240 Volt
• Included Components: Main unit

8. Warranty and Support

Your Hotpoint NDB 10736 WA IT washer dryer comes with a manufacturer's warranty. Please refer to the separate warranty card included with your purchase for specific terms and conditions. The Inverter Motor is guaranteed for 10 years.

For technical assistance, repairs, or to order spare parts, please contact Hotpoint customer support. You can find contact details on the Hotpoint official website or in the documentation provided with your appliance.

For more information, visit the official Hotpoint Store.