1. Introduction
The Dooya DC1602 is a versatile 15-channel wireless remote control designed for convenient operation of Dooya awning systems. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity.
2. Product Features
- Multi-Channel Control: Capable of controlling up to 15 individual awning channels separately.
- Wireless Operation: Utilizes radio frequency for seamless communication with compatible Dooya devices.
- Long Battery Life: Powered by a CR2450 3VDC button cell battery with an approximate lifespan of 2 years.
- Extended Range: Offers a range of up to 200 meters in open air and 35 meters through two walls.
- Wide Operating Temperature: Functions reliably in temperatures ranging from -10 °C to 50 °C.
- Frequency: Operates within the 433.05 - 434.79 MHz frequency band.
3. Package Contents
Please verify that all items are present in your package:
- 1 x Dooya DC1602 Wireless Remote Control
- 1 x Wall Mounting Bracket
- 2 x Screws and Wall Plugs (for wall bracket installation)
Image: The Dooya DC1602 remote control shown alongside its included wall mounting bracket.
4. Specifications
| Attribute | Specification |
|---|---|
| Model | DC1602 |
| Brand | Dooya |
| Channels | 15 |
| Power Source | CR2450 3VDC Button Cell Battery |
| Battery Life | Approx. 2 years |
| Frequency | 433.05 - 434.79 MHz |
| Operating Temperature | -10 °C to 50 °C |
| Range (Open Air) | 200 meters |
| Range (Through 2 Walls) | 35 meters |
5. Setup
5.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Gently slide the battery cover open.
- Insert one CR2450 3VDC button cell battery, ensuring the positive (+) side faces upwards.
- Close the battery cover securely.
Image: Rear view of the remote control, illustrating the battery compartment and product label.
5.2 Wall Bracket Installation
- Choose a suitable location for your wall bracket, ensuring it is within convenient reach and provides good signal transmission.
- Mark the positions for the two screws using the bracket as a template.
- Drill pilot holes if necessary, then insert the wall plugs.
- Secure the wall bracket to the wall using the provided screws.
- The remote control can then be placed into the bracket for storage.
5.3 Pairing with Awning System
The DC1602 remote control must be paired with your Dooya awning motor or receiver. The exact pairing procedure may vary depending on your specific awning system. Please refer to the instruction manual of your Dooya awning motor or receiver for detailed pairing steps. Generally, the process involves:
- Putting the awning motor/receiver into pairing mode (often by pressing a program button on the motor/receiver).
- Pressing a specific button or sequence on the DC1602 remote control to send the pairing signal.
- Confirming successful pairing (e.g., motor jog, LED indicator).
6. Operating Instructions
The DC1602 remote control features a clear display and intuitive buttons for easy operation of your awnings.
Image: Front view of the Dooya DC1602 remote control, showing the display and control buttons.
6.1 Button Functions
- Channel Display: The digital display shows the currently selected channel (1-15).
- Up Arrow (▲): Extends the awning.
- Down Arrow (▼): Retracts the awning.
- Stop/Pause (-): Stops the awning at its current position.
- Left Arrow (<): Decreases the channel number.
- Right Arrow (>): Increases the channel number.
Image: A close-up view of the remote control's display, showing the number '15' indicating the selected channel.
6.2 Selecting Channels
Use the Left Arrow (<) and Right Arrow (>) buttons to cycle through the 15 available channels. The selected channel number will be displayed on the screen. Each channel can be paired with a different awning or group of awnings.
6.3 Controlling Awnings
- Select the desired channel using the Left/Right Arrow buttons.
- Press the Up Arrow (▲) to extend the awning.
- Press the Down Arrow (▼) to retract the awning.
- Press the Stop/Pause (-) button to halt the awning's movement at any point.
7. Compatibility
The Dooya DC1602 remote control is designed to be compatible exclusively with Dooya brand products. It is compatible with the following Dooya devices:
- Tubular Motor: DM45R-50/12
- Wall Transmitter: DC1672
- Weather Sensors: DC118ZZ, DC5927, DC118W
This remote control can also serve as a replacement for the following Dooya remote control models:
- DC90
- DC92
- DC1600
8. Maintenance
8.1 Battery Replacement
When the remote control's range decreases significantly or it becomes unresponsive, it is likely time to replace the battery. Follow the battery installation steps in Section 5.1.
8.2 Cleaning
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water, as this can damage the electronic components.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding to awning | Low battery Not paired correctly Out of range Interference | Replace battery Re-pair the remote with the awning motor (refer to awning manual) Move closer to the awning Check for other devices operating on similar frequencies |
| Reduced operating range | Low battery Obstructions (walls, metal objects) Environmental factors | Replace battery Ensure clear line of sight if possible Avoid using in areas with high electromagnetic interference |
| Display is blank or dim | Dead or low battery | Replace battery |
10. Warranty and Support
Specific warranty information for the Dooya DC1602 remote control is not available in this manual. For details regarding warranty coverage, technical support, or service, please contact your Dooya product retailer or the official Dooya customer support channels.
