GIGABYTE GV-N406TEAGLE OC-8GD
Contents
GIGABYTE GeForce RTX 4060 Ti Eagle OC 8G Graphics Card User Manual
Model: GV-N406TEAGLE OC-8GD
Introduction
Welcome to the user manual for your GIGABYTE GeForce RTX 4060 Ti Eagle OC 8G Graphics Card. This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your new graphics card. Designed for optimal performance in gaming and creative applications, this card leverages NVIDIA's advanced architecture to deliver stunning visuals and efficient processing.

Figure 1: GIGABYTE GeForce RTX 4060 Ti Eagle OC 8G Graphics Card and its retail packaging.
Key Features
- Powered by NVIDIA DLSS 3, ultra-efficient Ada Lovelace architecture, and full ray tracing.
- 4th Generation Tensor Cores: Up to 4x performance with DLSS 3.
- 3rd Generation RT Cores: Up to 2x ray tracing performance.
- Integrated with 8GB GDDR6 128-bit memory interface.
- WINDFORCE Cooling System for efficient heat dissipation.
- RGB Fusion for customizable lighting effects.
- Dual BIOS for flexible performance profiles.
- Protection metal back plate for enhanced durability.
Setup Guide
System Requirements
Before installation, ensure your system meets the following minimum requirements:
- PCI Express-compliant motherboard with one dual-width x16 graphics slot.
- Minimum 550W power supply with one 8-pin PCIe power connector.
- Microsoft Windows 10/11 64-bit operating system.
- 8GB system memory (RAM) or more recommended.
- Internet connection for driver downloads.
Installation Steps
- Preparation: Power off your computer and unplug all cables. Open your computer case.
- Remove Old Graphics Card (if applicable): Unscrew and carefully remove any existing graphics card.
- Install New Graphics Card: Locate an available PCI Express x16 slot on your motherboard. Align the graphics card with the slot and press down firmly until it is securely seated. Ensure the retention clip on the motherboard clicks into place.
- Secure the Card: Secure the graphics card to the computer case with screws.
- Connect Power: Connect the 8-pin PCIe power connector from your power supply to the graphics card.
- Close Case and Reconnect: Close your computer case, reconnect all cables, and power on your computer.
- Driver Installation: Once Windows loads, install the latest NVIDIA drivers from the official GIGABYTE or NVIDIA website.

Figure 2: Graphics card dimensions for compatibility check (Length: 10.7 inches, Width: 4.5 inches, Height: 1.6 inches).

Figure 3: Rear view of the graphics card showing DisplayPort 1.4 and HDMI 2.1 outputs.
Operating Instructions
After successful installation and driver setup, your GIGABYTE GeForce RTX 4060 Ti Eagle OC 8G Graphics Card is ready for use. For optimal performance, ensure your display is connected to one of the card's output ports (DisplayPort or HDMI).
Driver Management
- NVIDIA GeForce Experience: Install NVIDIA GeForce Experience software to automatically optimize game settings, update drivers, and record gameplay.
- Driver Updates: Regularly check for and install the latest graphics drivers from the official NVIDIA website (www.nvidia.com/drivers) to ensure compatibility and performance improvements for new games and applications.
Performance Optimization
- Game Settings: Adjust in-game graphics settings to balance visual quality and frame rate according to your preference.
- DLSS and Ray Tracing: Enable NVIDIA DLSS (Deep Learning Super Sampling) and Ray Tracing in supported games for enhanced visual fidelity and performance.
- GIGABYTE Control Center: Utilize GIGABYTE's proprietary software (if available for this model) for fine-tuning clock speeds, fan curves, and RGB lighting.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your graphics card.
- Dust Removal: Periodically clean dust from the heatsink fins and fan blades using compressed air. Ensure fans are not spinning during cleaning.
- Airflow: Maintain good airflow within your PC case by ensuring proper cable management and clear intake/exhaust vents.
- Driver Updates: As mentioned in operating instructions, keep your drivers updated.
Troubleshooting
If you encounter issues with your graphics card, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Black screen | Incorrect cable connection, loose card, power issue, driver issue. |
|
| Low frame rates/Poor performance | Outdated drivers, high in-game settings, overheating, background applications. |
|
| System crashes/Freezes | Overheating, unstable overclock, driver conflict, insufficient power. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | GV-N406TEAGLE OC-8GD |
| Graphics Coprocessor | NVIDIA GeForce RTX 4060 Ti |
| Graphics Card RAM Size | 8 GB GDDR6 |
| Memory Speed | 18000 MHz |
| Max Screen Resolution | 7680x4320 |
| Video Output Interface | DisplayPort, HDMI |
| Item Weight | 2.2 pounds |
| Product Dimensions (LxWxH) | 10.71 x 4.53 x 1.61 inches |
| Manufacturer | GIGABYTE |
Warranty and Support
Your GIGABYTE GeForce RTX 4060 Ti Eagle OC 8G Graphics Card comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product packaging or visit the official GIGABYTE website.
For technical support, driver downloads, and frequently asked questions, please visit the GIGABYTE support page or their official brand store:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.