OLEVS Men's Analog Quartz Watch Instruction Manual

1. Product Overview

This manual provides instructions for the OLEVS Men's Analog Quartz Watch, Model CT-S-G9970GJ-JL. This timepiece features a quartz movement, stainless steel construction, luminous hands, and a date display. It is designed for daily wear and offers water resistance.

Image 1: OLEVS Men's Analog Quartz Watch (Gold-blue variant) with a link adjustment tool.

Image 2: Close-up view of the watch face, highlighting the blue dial and gold accents.

2. Setup and Initial Use

2.1 Setting Time and Date

1. Pull the crown (the small knob on the side of the watch) out to the first click position to adjust the date. Turn the crown clockwise or counter-clockwise until the correct date is displayed.
2. Pull the crown out to the second click position to adjust the time. Turn the crown to move the hour and minute hands until the correct time is set.
3. Once the time and date are set, push the crown back into its original position to start the watch movement.

2.2 Adjusting the Watch Band

The stainless steel band can be adjusted to fit your wrist. This typically involves removing or adding links. A specialized tool is often included for this purpose. If you are unsure, it is recommended to seek assistance from a professional jeweler to avoid damage to the watch band.

Image 3: Key features including the solid steel watchband and luminous display.

3. Operating Instructions

3.1 Reading the Time and Date

The watch features a traditional analog display with hour, minute, and second hands. The date is displayed in a window on the dial. The hands and hour markers are luminous, allowing for visibility in low-light conditions after absorbing sufficient light.

3.2 Water Resistance

This watch is water-resistant up to 30 meters (3ATM). This means it is suitable for daily use, such as hand washing, splashes, and rain. It is not recommended for swimming, diving, or prolonged water immersion. Ensure the crown is fully pushed in before any contact with water.

Video 1: Demonstration of the OLEVS watch, including its design and water resistance.

4. Maintenance

4.1 Cleaning

To maintain the appearance of your watch, regularly wipe the case and band with a soft, dry cloth. For the stainless steel band, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.

4.2 Battery Replacement

The watch is powered by an original imported quartz movement with a battery life of approximately 2-3 years. When the watch stops or the time becomes inaccurate, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.

4.3 Storage

When not in use, store your watch in a dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. The original OLEVS branded box can be used for storage.

5. Troubleshooting

• Watch not keeping accurate time: This could indicate a low battery. Refer to section 4.2 for battery replacement. If the issue persists after battery replacement, contact customer support.
• Date not changing correctly: Ensure the time is set past midnight for the date to advance. If the issue persists, re-adjust the date as per section 2.1.
• Difficulty with band adjustment: The watch band links are designed for secure fitting. If you encounter significant difficulty or do not have the correct tools, consult a professional jeweler.

6. Specifications

Image 4: Detailed product parameters and specifications.

7. Warranty and Support

Your OLEVS watch comes with a manufacturer's warranty. For any issues encountered during use, please contact OLEVS customer support through the platform where the product was purchased (e.g., Amazon). Please retain your purchase receipt as proof of purchase for warranty claims.