1. Introduction
Thank you for choosing the Crompton Energion Hyperjet 1200mm BLDC Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read it thoroughly before use and retain it for future reference.
The Energion Hyperjet fan is designed for superior air delivery and energy efficiency, featuring ActivBLDC Technology and a convenient remote control for enhanced comfort.
Image: Crompton Energion Hyperjet ceiling fan installed in a modern living room, illustrating wide air circulation.
2. Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.
- Professional Installation: Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- Power Disconnection: Always disconnect power at the main circuit breaker before installing, cleaning, or performing any maintenance on the fan.
- Secure Mounting: Ensure the mounting structure can support the weight of the fan (approximately 2.85 kg) and is securely fastened.
- Blade Clearance: Maintain adequate clearance between the fan blades and any obstructions (walls, furniture) and the floor.
- Avoid Contact: Do not insert fingers or any objects into the fan blades while the fan is operating.
- Voltage: Ensure the fan is connected to a 230 Volt, 50 Hz AC power supply.
- Indoor Use Only: This fan is designed for indoor use in dry locations.
3. Package Contents
Carefully unpack your fan and ensure all items are present. If any items are missing or damaged, contact customer support immediately.
- Fan Motor Assembly
- Fan Blades (3 units, Aluminium)
- Downrod
- Canopy (Top and Bottom)
- Mounting Bracket
- Remote Control
- Hardware Pack (screws, washers, nuts)
- User Manual
4. Setup and Installation
Installation of the Crompton Energion Hyperjet ceiling fan requires electrical wiring and secure mounting. It is strongly recommended that a certified electrician performs the installation to ensure safety and proper functioning.
General Installation Steps (Consult a professional):
- Power Off: Ensure the main power supply to the installation area is switched off at the circuit breaker.
- Mounting Bracket: Securely attach the mounting bracket to a ceiling joist or a fan-rated outlet box using appropriate hardware.
- Downrod Assembly: Insert the downrod through the canopy and motor assembly. Secure it with the provided pin and clip.
- Wiring: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the separate installation guide (if applicable) or by your electrician. Ensure all connections are secure.
- Hang Fan: Carefully lift the fan assembly and hang it onto the mounting bracket.
- Attach Blades: Securely attach the three aluminium blades to the motor housing using the provided screws. Ensure all screws are tightened.
- Canopy Installation: Slide the canopy up to cover the mounting bracket and wiring connections, then secure it.
- Power On: Restore power at the circuit breaker and test the fan operation.
Image: Components of the Crompton Energion Hyperjet ceiling fan, including motor, blades, and downrod.
5. Operating Instructions
Your Crompton Energion Hyperjet fan comes with a convenient RF (Radio Frequency) remote control, allowing you to operate the fan from anywhere in the room without needing to point it directly at the fan.
Remote Control Functions:
- ON/OFF: Press to turn the fan on or off.
- Speed Control (1-5): Adjust the fan speed from 1 (lowest) to 5 (highest).
- Timer: Set the fan to turn off automatically after 1, 2, 3, or 4 hours.
- Hyper Mode (HYP): Activates the fan at its highest speed for rapid cooling.
- Sleep Mode: Reduces fan speed gradually over time to provide comfortable sleeping conditions while conserving energy.
Image: Crompton Energion Hyperjet remote control with buttons for speed, timer, hyper mode, and sleep mode.
Image: Crompton Energion Hyperjet fan in a room with arrows indicating high-speed airflow from Hyper Mode.
6. Maintenance
Regular maintenance ensures optimal performance and extends the life of your ceiling fan.
- Cleaning: Dust the fan blades and motor housing regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Blade Cleaning: Ensure blades are clean and free of dust buildup, which can affect air delivery and balance.
- Tighten Screws: Periodically check all screws on the fan assembly, especially those attaching the blades, and tighten them if necessary. Loose screws can cause noise and wobbling.
- No Lubrication Needed: The BLDC motor is designed for maintenance-free operation and does not require lubrication.
- Power Off: Always ensure the power supply to the fan is disconnected before cleaning or performing any maintenance.
7. Troubleshooting
If you encounter issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply Remote control battery low/dead | Check circuit breaker and wall switch Replace remote control batteries |
| Fan makes excessive noise | Loose screws on blades or mounting Improper installation | Tighten all screws Ensure fan is securely mounted; consult an electrician |
| Fan wobbles | Loose blades or mounting Unbalanced blades | Check and tighten all screws Ensure blades are installed correctly and are not bent |
| Remote control not working | Low/dead batteries Interference | Replace batteries Ensure no strong radio interference sources are nearby |
If the problem persists after attempting these solutions, please contact Crompton customer support.
8. Specifications
| Brand | Crompton |
| Model Name | CFENHP35W48BRNRM |
| Electric Fan Design | Ceiling Fan |
| Colour | Brown |
| Power Source | Corded Electric |
| Wattage | 35 Watts |
| Voltage | 230 Volts |
| Speed | 350 RPM |
| Air Flow Capacity | 220 Cubic Meters Per Minute (CMM) |
| Number of Blades | 3 |
| Blade Material | Aluminium (Powder Coated) |
| Noise Level | 70 Decibels |
| Product Dimensions (D x W x H) | 57.6D x 24.6W x 21.4H Centimeters |
| Item Weight | 2.85 Kilograms |
| Control Method | Remote Control |
| Special Features | Remote Controlled, Timer |
9. Warranty Information
The Crompton Energion Hyperjet 1200mm BLDC Ceiling Fan comes with a 2-year manufacturer warranty from the date of purchase. This warranty covers manufacturing defects under normal use and service conditions.
The warranty does not cover damages resulting from improper installation, misuse, unauthorized repairs, accidents, or acts of nature. Please retain your purchase receipt as proof of purchase for warranty claims.
10. Customer Support
For any queries, assistance, or warranty claims, please contact Crompton customer service:
- Manufacturer: CROMPTON GREAVES CONSUMER ELECTRICAL
- Packer Contact Information: Crompton Greaves Consumer Electricals Limited, Equinox Business Park, 1st Floor, Tower 3, LBS Marg, Kurla (W), Mumbai 400070, Maharashtra, India.
- Phone: +91 22 6167 8499
- Importer Contact Information: Crompton Greaves Consumer Electricals Ltd. Fan Division Bethora Ponda - Goa, INDIA, 403 409
Please have your model number (CFENHP35W48BRNRM) and purchase details ready when contacting support.