Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your PETLIBRO Dual Bowl Splitter (Model SS002). This accessory is designed to work seamlessly with compatible PETLIBRO Automatic Pet Feeders, including models PLAF005, PLAF006, and PLAF103, allowing you to feed two pets simultaneously from a single feeder.
Please read this manual thoroughly before use to ensure proper installation and optimal performance of your product. Keep this manual for future reference.
Package Contents
Before proceeding with the setup, please verify that all components are present in your package:
- 1 x Dual Bowl Holder (Base)
- 2 x Stainless Steel Bowls
- 1 x Meal Separator
Image: All components included in the PETLIBRO Dual Bowl Splitter package, showing the main bowl holder, two removable stainless steel bowls, and the small meal separator piece.
Setup Instructions
Follow these steps to correctly assemble and attach the dual bowl splitter to your PETLIBRO Automatic Pet Feeder:
- Step 1: Attach the Dual Bowl Holder to the Feeder.
Align the dual bowl holder with the notch located at the bottom of your PETLIBRO Automatic Pet Feeder. Gently push the bowl holder into place until it clicks securely.
Image: A hand guiding the dual bowl holder onto the base of the PETLIBRO automatic feeder, showing the alignment process.
- Step 2: Install the Stainless Steel Bowls.
Place the two stainless steel bowls into their respective slots within the dual bowl holder. Ensure they are seated firmly.
Image: The assembled dual bowl splitter with two shiny stainless steel bowls inserted into the black base.
- Step 3: Insert the Meal Separator.
Align the meal separator with the round hole located between the two bowl slots. Insert it into the hole.
- Step 4: Adjust the Meal Separator.
Slide the meal separator to the right until it can no longer move. This ensures proper food distribution into both bowls.
Image: A multi-step diagram showing how to insert the meal separator into the bowl holder and then slide it to the right for correct positioning.
Image: The PETLIBRO Dual Bowl Splitter fully assembled and attached to a compatible automatic pet feeder, demonstrating how it looks when ready for use with pet food.
Operation
Once the dual bowl splitter is correctly installed, your PETLIBRO Automatic Pet Feeder will dispense food into both stainless steel bowls simultaneously, ensuring an even distribution for two pets.
- Even Food Distribution: The integrated meal separator ensures that the dispensed dry food is divided equally between the two bowls.
- Adjustable Portions: The feeder (not the splitter itself) allows for setting adjustable portions, which will then be split between the two bowls. Refer to your main PETLIBRO Automatic Pet Feeder manual for programming feeding schedules and portion sizes.
Image: An illustration demonstrating how dry pet food is evenly distributed from the feeder's outlet into both stainless steel bowls of the splitter.
Maintenance and Cleaning
Regular cleaning of the dual bowl splitter is essential for your pets' hygiene and the longevity of the product. The design allows for easy disassembly for thorough cleaning.
- Disassembly: Remove the stainless steel bowls and the meal separator from the dual bowl holder. The dual bowl holder can also be detached from the main feeder unit.
- Cleaning Bowls: The stainless steel bowls are dishwasher safe or can be washed by hand with warm, soapy water. Rinse thoroughly.
- Cleaning Holder and Separator: The dual bowl holder and meal separator should be wiped clean with a damp cloth. For deeper cleaning, they can be hand-washed with mild soap and water. Ensure all parts are completely dry before reassembly to prevent mold or bacterial growth.
- Do Not Submerge: Do not submerge the main feeder unit in water. Only the removable parts of the splitter are washable.
Image: Water splashing around the stainless steel bowls, illustrating the ease of cleaning and their removable design.
Troubleshooting
If you encounter any issues with your PETLIBRO Dual Bowl Splitter, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Food not dispensing evenly. | Meal separator is not correctly positioned. | Ensure the meal separator is fully slid to the right until it stops. |
| Dual bowl holder not attaching securely. | Incorrect alignment or obstruction. | Verify alignment with the feeder's notch and check for any debris preventing a secure connection. Push firmly until it clicks. |
| Bowls do not fit properly. | Bowls are not inserted correctly. | Ensure each stainless steel bowl is placed into its designated slot and seated firmly. |
For issues related to the main feeder's functionality (e.g., Wi-Fi connection, feeding schedule, power), please consult the instruction manual for your specific PETLIBRO Automatic Pet Feeder model (PLAF005, PLAF006, PLAF103).
Product Specifications
| Feature | Detail |
|---|---|
| Brand | PETLIBRO |
| Model Number | SS002 |
| Color | Black |
| Product Dimensions | 27 x 17 x 7 cm (10.6 x 6.7 x 2.8 inches) |
| Weight | 620 g (1.37 lbs) |
| Material | Stainless Steel (bowls), Durable Plastic (holder) |
| Compatible Feeder Models | PETLIBRO PLAF005, PLAF006, PLAF103 Automatic Pet Feeders |
| Special Features | Adjustable portions for different pets (via feeder), Even food distribution, Easy to clean, Removable bowls |
| Recommended Use | Dry food, Multiple pets |
Image: Visual representation of the PETLIBRO Dual Bowl Splitter's compatibility with the PLAF005 (black) and PLAF006 (white) automatic pet feeders.
Warranty Information
PETLIBRO products typically come with a limited warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your original PETLIBRO Automatic Pet Feeder or visit the official PETLIBRO website. Keep your proof of purchase for warranty claims.
Customer Support
If you have any questions, require technical assistance, or need to report an issue with your PETLIBRO Dual Bowl Splitter, please contact PETLIBRO Customer Support:
- Website: Visit the official PETLIBRO website for FAQs, support articles, and contact forms.
- Email: Refer to your product packaging or the PETLIBRO website for the customer support email address.
- Phone: Check the PETLIBRO website for available phone support numbers in your region.
When contacting support, please have your product model number (SS002) and your original feeder model number (e.g., PLAF005) ready.
