Introduction
The Kenney Lunar KL79230 Complete Blackout Room Darkening Wrap Around Curtain Rod is designed to enhance privacy, reduce noise, and block light by wrapping around your window frame. This manual provides instructions for proper installation, operation, and maintenance to ensure optimal performance and longevity of your curtain rod.
This telescoping rod is adjustable in length from 28 to 48 inches and projects 2.90 inches from the wall. Its 5/8-inch diameter makes it suitable for various rooms including kitchens, bedrooms, dining rooms, and living rooms. It is ideal for hanging light to medium weight curtains with grommets, back tabs, or pockets, and can also be used with tab tops or clip rings.
Product Components
Before beginning installation, ensure all components are present:
- One (1) telescoping steel curtain rod
- Two (2) metal mounting brackets
- Screws for mounting
- Drywall anchors
- Installation instructions (this manual)
Figure 1: Included Hardware Components
This image displays the complete set of hardware provided with your curtain rod, including the telescoping rod, two mounting brackets, screws, and drywall anchors.
Figure 2: Stronger Metal Brackets
A detailed view of the two metal mounting brackets, designed for enhanced strength and durability.
Setup and Installation
Follow these steps for secure installation of your curtain rod. It is recommended to have a drill, screwdriver, and a level for accurate installation.
- Determine Placement: Hold the curtain rod with curtains attached (if desired) against the window frame to determine the desired height and width. Mark the positions for the mounting brackets. Ensure the brackets are level.
- Mark Drill Holes: Place each bracket at the marked position and use a pencil to mark the screw holes.
- Drill Pilot Holes: For wood studs, drill pilot holes slightly smaller than the screw diameter. For drywall, drill holes appropriate for the drywall anchors. Note: Specific drill bit size for drywall anchors is not provided in the product information. It is recommended to use a drill bit that matches the diameter of the anchor body, or consult a general drywall anchor installation guide.
- Insert Drywall Anchors (if applicable): Gently tap drywall anchors into the pilot holes until flush with the wall surface.
- Attach Brackets: Align the brackets with the drilled holes (or anchors) and secure them to the wall using the provided screws. Ensure they are firmly attached.
- Assemble Rod: The rod features an easy pin-in installation. Connect the telescoping rod sections and secure them with the small pin/screw provided, as shown in Figure 3.
- Hang Curtains: Slide your curtains onto the assembled rod.
- Mount Rod: Place the curtain rod onto the installed brackets. The wrap-around design allows the curtain to extend to the wall, minimizing light gaps.
Figure 3: Easy Pin-In Installation
This diagram illustrates how to connect the curtain rod sections using the pin-in mechanism for a secure fit.
Video 1: Lunar Complete Blackout Room Darkening Wrap Rod Installation
This official video from Kenney Manufacturing Company demonstrates the step-by-step installation process for the Lunar Blackout Wrap Rod.
Operating Instructions
The Kenney Lunar KL79230 curtain rod is designed for straightforward use:
- Adjusting Length: The rod is telescoping, allowing adjustment from 28 to 48 inches. Extend or retract the rod sections to fit your window width. Ensure the rod is securely seated in the brackets after adjustment.
- Curtain Placement: For maximum light blocking, energy saving, and noise reduction, pair this rod with room darkening or blackout curtain panels (sold separately). The wrap-around design ensures the curtain extends to the wall, minimizing light gaps at the sides.
Figure 4: Blackout Performance
This image demonstrates the effectiveness of the wrap-around design in mitigating window sidelight, reducing noise, and enhancing privacy by showing a 'before' and 'after' comparison.
Figure 5: Adjustable Length Feature
A close-up view highlighting the adjustable telescoping mechanism of the curtain rod, allowing for flexible length customization.
Maintenance
To maintain the appearance and functionality of your curtain rod:
- Cleaning: Wipe the rod and brackets with a soft, dry cloth to remove dust. Avoid abrasive cleaners or harsh chemicals, as these may damage the finish.
- Periodic Check: Periodically check the mounting screws to ensure they remain tight. Re-tighten if necessary to prevent the rod from sagging or detaching.
- Curtain Removal: When removing curtains for cleaning or replacement, carefully lift the rod from the brackets. If the rod is secured with a pin, remove the pin first.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Rod sags or feels unstable | Loose mounting screws or improper installation into drywall. | Ensure screws are tightened. If installed in drywall, verify anchors are correctly seated and holding firmly. Consider relocating if the wall material is insufficient. |
| Screws strip during installation | Over-tightening or using an incorrect drill bit size for pilot holes. | Use appropriate pilot hole sizes for your wall material. Avoid excessive force when tightening screws. If a screw strips, it may need to be replaced with a higher quality screw of the same size, or a larger anchor may be required if the hole is compromised. |
| Curtains do not fully block light at sides | Curtains are not properly wrapped around the rod ends. | Ensure the curtain fabric extends fully around the curved ends of the rod to meet the wall, maximizing the blackout effect. |
Specifications
- Model Number: KL79230
- Brand: Kenney
- Product Type: Complete Blackout Room Darkening Wrap Rod
- Color: Black
- Material: Carbon Steel
- Adjustable Length: 28 - 48 inches
- Rod Diameter: 5/8 inch
- Projection from Wall: 2.90 inches
- Mounting Type: Wall Mounted
- Included Components: Telescoping curtain rod, 2 metal mounting brackets, screws, drywall anchors
- Item Weight: 0.39 kg (approximately 0.86 lbs)
- Maximum Weight Recommendation: 4 pounds (for curtains)
- UPC: 042437572897
Figure 6: Available Finishes
This image displays the curtain rod in various finishes, including Satin Silver, Black, and Espresso, demonstrating the aesthetic options.
Warranty Information
According to the manufacturer's specifications, this product comes with No Manufacturer's Warranty.
Please retain your proof of purchase for any potential returns or inquiries with the retailer, subject to their return policy.
Support
For additional information or assistance, please visit the official Kenney store:
