1. Introduction
Thank you for choosing the Syantek Remote Control Outlet. This device provides convenient wireless control over your electrical appliances, offering independent control for two sockets and a strong signal range. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Important Safety Information
- For indoor use only. Do not expose to water or moisture.
- Do not exceed the maximum load capacity of 15A, 1875W (Resistive) at 125V, 60Hz.
- Ensure the outlet is fully inserted into a standard 3-prong wall socket.
- Do not disassemble or modify the device.
- Keep out of reach of children.
- Unplug the device from the wall outlet before cleaning.
3. Product Overview
3.1 Package Contents
- 2 x Remote Control Outlets
- 1 x Remote Controller
- 1 x Battery (for remote)
3.2 Key Features
- Independent 2 Sockets: Each outlet unit features two independently controllable sockets.
- Strong Signal Range: Operates up to 100 feet, even through walls, doors, and windows.
- Compact Design: 2-in-1 design occupies only one wall socket while providing two power options.
- Programmable: Allows custom programming for one remote to control multiple outlets or multiple remotes to control the same outlet.
- Easy to Use: Plug-and-play functionality with no programming or tools required for basic operation.
- FCC Certified: Meets strict safety and quality standards.
Image: Two Syantek remote control outlets and one remote controller.
Image: Diagram showing the dimensions of the Syantek remote control outlet (4.3 in / 10.8 cm length, 1.5 in / 3.8 cm height, 1.3 in / 3.4 cm depth) and highlighting the program button, included battery, 3-prong plug, and standard 3-hole socket.
4. Setup Instructions
- Insert Battery: Open the battery compartment on the back of the remote controller and insert the included battery, ensuring correct polarity.
- Plug in Outlet: Plug the Syantek Remote Control Outlet into a standard 3-prong wall socket.
- Connect Appliance: Plug your desired appliance into one of the two sockets on the remote control outlet.
- Test Operation: Use the remote control to turn the connected appliance ON and OFF. The outlets are pre-programmed for immediate use.
Image: Various household items like kitchen appliances, humidifiers, fans, lamps, home decor, and holiday decorations are shown, illustrating the simple plug-and-play setup of the remote control outlet for different applications.
5. Operating Your Remote Control Outlet
5.1 Basic Operation
Each remote control outlet unit has two sockets, labeled '1' and '2' (or '3' and '4' for the second unit in a kit). The remote controller has corresponding buttons to control these sockets.
- Press the ON button next to the corresponding number (1, 2, 3, or 4) to turn on the appliance connected to that socket.
- Press the OFF button next to the corresponding number (1, 2, 3, or 4) to turn off the appliance connected to that socket.
5.2 All On/All Off Function
The remote controller also features master control buttons:
- Press ALL ON to turn on all connected sockets simultaneously.
- Press ALL OFF to turn off all connected sockets simultaneously.
Image: A sequence of illustrations demonstrating independent control of light bulbs using the remote. Individual buttons (1, 2, 3, 4) turn specific bulbs on or off, and the 'ALL ON' and 'ALL OFF' buttons control all bulbs simultaneously.
6. Programming Instructions
The Syantek Remote Control Outlet allows for custom programming to suit your needs. You can program one remote to control multiple outlets or multiple remotes to control the same outlet.
6.1 To Program an Outlet to a Remote Button:
- Plug the remote control outlet into a wall socket.
- Press and hold the small Program Button on the side of the outlet unit until the indicator light begins to flash.
- While the indicator light is flashing, press the desired ON button (1, 2, 3, or 4) on your remote controller. The indicator light on the outlet will stop flashing and remain solid for a moment, then turn off, confirming successful programming.
- Repeat for other sockets if you wish to assign them to different remote buttons.
6.2 To Clear Programming:
- Unplug the remote control outlet from the wall socket.
- Press and hold the Program Button on the side of the outlet unit while plugging it back into the wall socket.
- Continue holding the Program Button for approximately 5 seconds until the indicator light flashes rapidly, then turns off. This indicates that all previous programming for that outlet unit has been cleared.
Image: An illustration showing how multiple Syantek remote control outlets can be controlled by a single remote, or how a single outlet can be controlled by multiple remotes, highlighting the programmable and expandable nature of the system.
7. Care and Maintenance
- Cleaning: Disconnect the device from the power outlet before cleaning. Wipe with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place when not in use.
- Battery Replacement: If the remote control's range decreases or it stops responding, replace the battery with a new 12V battery of the same type.
8. Troubleshooting Guide
| Issue | Possible Cause | Solution |
|---|---|---|
| Outlet not responding to remote. | Remote battery is low or dead. Outlets are not programmed to the remote. Remote is out of range. | Replace remote battery. Reprogram the outlets to the remote (see Section 6.1). Move closer to the outlet. |
| Appliance does not turn on. | Appliance is not plugged in correctly. Appliance is faulty. Outlet is not receiving power. | Ensure appliance is fully plugged into the outlet. Test appliance in a different wall socket. Check if the wall socket has power. |
| Limited remote range. | Obstructions (thick walls, metal objects). Low remote battery. | Minimize obstructions between remote and outlet. Replace remote battery. |
9. Technical Specifications
- Model Number: BHC1802-2
- Input Voltage: 125V AC, 60Hz
- Max Current: 15A
- Max Power: 1875W (Resistive Load)
- Wireless Frequency: RF (Radio Frequency)
- Remote Range: Up to 100 feet (line of sight)
- Remote Battery: 12V (included)
- Operation Mode: ON-OFF
- Certifications: FCC Listed
- Product Dimensions: 4.53 x 4.06 x 2.44 inches (outlet unit)
10. Customer Support
For any questions, concerns, or assistance with your Syantek Remote Control Outlet, please do not hesitate to reach out to our customer support team. While specific warranty details are not provided in this manual, our team is available to help with product inquiries and troubleshooting.
Please refer to the product packaging or the Syantek official website for contact information.
