Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Mcbazel 360° Electric Turntable. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
Product Overview
The Mcbazel 360° Electric Turntable is designed for displaying various items, from small jewelry to larger objects, with smooth, controlled rotation. It features a 42 cm diameter platform and can support a maximum load of 50-100 kg, depending on rotation speed.
Key Features:
- 42 cm Diameter Platform: Provides ample space for various items.
- 360-Degree Rotation: Smooth, continuous rotation for comprehensive viewing.
- Adjustable Rotation Angles: Select from 45°, 90°, or 180° rotation modes.
- Remote Control Operation: Adjust speed, direction, and angles from up to 6 meters away.
- High Load Capacity: Supports items weighing between 50 kg and 100 kg.
- Low Noise Operation: Designed to operate quietly, typically below 50 dB.
- Stable Design: Features anti-vibration properties and non-slip bottom pads.
Package Contents:
- 1 x 42 cm Rotating Display Stand
- 1 x 160 cm Power Supply
- 1 x Remote Control
Setup
- Unpack Components: Carefully remove all items from the packaging.
- Power Connection: Connect the provided 160 cm power supply to the turntable's power interface. Ensure the plug is fully inserted and the DC line port is securely connected.
- Initial Power Check: Before placing items, ensure the power connection is normal. If the turntable does not respond, unplug and re-plug the power supply. Turn off the red ON/OFF switch on the turntable, then turn it back on.
- Placement: Place the turntable on a stable, flat surface. For optimal stability and to prevent motor strain, ensure items are centered on the platform, especially heavier objects.
Image: The turntable's base showing the ON/OFF button, power interface, and infrared sensor for the remote control. The rotating support requires external power.
Operation
Basic Operation:
- Power ON/OFF: Use the red ON/OFF button located on the turntable's base to power the unit on or off.
Remote Control Functions:
The included remote control allows for convenient adjustment of the turntable's functions from a distance of up to 6 meters. Ensure the remote is aimed at the infrared sensor on the turntable for proper function.
Image: A user operating the turntable with the remote control, showcasing two golden deer figurines. The remote allows easy adjustment of rotation angle and speed.
Image: Detailed instructions for the remote control buttons.
- Top Left Button: Save current position
- Second Left Button: Resume continuous rotation
- Top Right Button: Intermittent rotation
- Plus (+) Button: Accelerate rotation speed
- Left Arrow Button: Turn right (clockwise)
- Center Play/Pause Button: Start/Pause rotation
- Right Arrow Button: Turn left (counter-clockwise)
- Minus (-) Button: Decelerate rotation speed
- Middle Left Button (with angles): Multi-angle back-and-forth rotation (45°, 90°, 180°)
- Middle Right Button (with home icon): Return to defined home position
- Bottom Button (with 1° icon): Adjust rotation angle by 1° increments
Adjustable Settings:
Image: Visual representation of the turntable's adjustable settings, including clockwise/counter-clockwise rotation, continuous/intermittent rotation, 45°/90°/180° rotation angles, and 1° angle adjustment.
- Direction: Use the left and right arrow buttons on the remote to switch between clockwise and counter-clockwise rotation.
- Speed: Use the '+' and '-' buttons to increase or decrease the rotation speed.
- Rotation Mode: Select between continuous rotation or intermittent rotation using the dedicated buttons.
- Angle Adjustment: Choose preset angles of 45°, 90°, or 180° for back-and-forth rotation. Fine-tune the angle with 1° increments using the bottom button.
Maintenance
- Cleaning: Wipe the turntable surface and base with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the plastic material.
- Storage: When not in use, store the turntable in a dry, dust-free environment.
- Power Disconnection: Always disconnect the power supply when cleaning or moving the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Turntable does not power on or rotate. | Power supply not connected properly or unit is off. | Check if the power plug and DC line are securely inserted. Ensure the red ON/OFF switch on the turntable is in the 'ON' position. Try unplugging and re-plugging the power supply. |
| Turntable vibrates excessively during rotation. | Object is not centered or is too heavy. Slight vibration is normal. | Ensure the item placed on the turntable is centered. Verify the item's weight does not exceed the maximum load capacity (50-100 kg). A slight mechanical vibration is considered normal during operation. |
| Remote control is unresponsive. | Remote not aimed at sensor, or battery issue. | Ensure the remote control is aimed directly at the infrared sensor on the turntable. Check and replace the remote control battery if necessary. |
| Rotation is not smooth or has slight jerks. | This can occur occasionally, especially when filming. | While generally smooth, minor inconsistencies can occur. For critical video recording, test the rotation beforehand. Ensure the load is within limits and centered. |
Image: The turntable is designed for low noise operation, typically between 40-50 dB, to avoid disturbing video capture or daily activities.
Image: The turntable's maximum load capacity is between 50-100 kg, depending on the rotation speed. It is suitable for displaying various items.
Image: The turntable features an anti-vibration design and non-slip pads on the bottom for enhanced stability during operation.
Specifications
| Model Number | MT-020450 |
| Brand | Mcbazel |
| Material | Plastic |
| Color | Black |
| Item Diameter | 42 Centimeters |
| Product Dimensions (L x W x H) | 46.5 x 43.2 x 7.5 cm |
| Item Weight | 2.31 Kilograms |
| Rated Current | 2 A |
| Rated Power | 5 V |
| Output Voltage | 12-16 V |
| Input Voltage | 100-250 V |
| Recommended Maximum Load | 100 Kilograms (Note: Actual maximum load may vary between 50-100 kg depending on rotation speed and item distribution.) |
| Country of Origin | China |
Warranty and Support
Warranty information for this product is not available in the provided data. For support or warranty inquiries, please contact the retailer or manufacturer directly.
Versatile Applications
The Mcbazel Electric Turntable is suitable for a wide range of uses, including product photography, large product displays, shop window displays, and live streaming setups.
Image: The turntable being used to display various items such as a mannequin, decorative objects, jewelry, and cosmetics, highlighting its wide range of applications.