ROMOSS PEA30

Download PDF
Contents

ROMOSS PEA30 30000mAh Power Bank User Manual

Model: PEA30

Introduction

Thank you for choosing the ROMOSS PEA30 30000mAh Power Bank. This portable power solution is designed to provide reliable and fast charging for your electronic devices. Please read this manual carefully to ensure proper use and optimal performance of your power bank.

ROMOSS PEA30 30000mAh Power Bank

Image: The ROMOSS PEA30 30000mAh Power Bank, a portable charging device.

Important Safety Information

  • Do not disassemble, modify, or repair the device.
  • Do not expose to fire, water, or extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Keep out of reach of children.
  • Use only compatible charging cables and adapters.
  • Dispose of the power bank responsibly according to local regulations.

Setup and Initial Charge

Before first use, it is recommended to fully charge your ROMOSS PEA30 Power Bank. This ensures optimal battery performance and longevity.

  1. Connect to Power Source: Use a compatible USB-C cable to connect the power bank's Type-C input port to a 30W power adapter (not included). Alternatively, you can use a Micro USB or Lightning cable with their respective input ports.
  2. Monitor Charging: The digital display on the power bank will show the current charge level.
  3. Full Charge Indication: The power bank is fully charged when the display shows 100%. A full recharge typically takes approximately 5.5 hours with a 30W Type-C charger.
ROMOSS PEA30 Power Bank recharging time comparison

Image: The power bank being recharged via its Type-C port, showing a full recharge time of 5.5 hours with a 30W charger.

Operating Instructions

Charging Your Devices

The ROMOSS PEA30 Power Bank features multiple output ports to charge various devices simultaneously.

ROMOSS PEA30 Power Bank with 3 input and 3 output ports

Image: Close-up view of the power bank's ports, detailing 3 input options (Micro USB, Lightning, USB-C) and 3 output options (USB-C, 2x USB-A).

  • Output Ports:
    • 1x Type-C (30W Two-Way Fast Charging)
    • 2x USB-A (up to 22.5W Max)
  • Input Ports:
    • 1x Type-C (30W)
    • 1x Micro USB
    • 1x Lightning

Note: The Micro USB and Lightning input ports cannot be used simultaneously for recharging the power bank.

Fast Charging Capabilities

The PEA30 supports advanced charging protocols including PD3.0, QC3.0, SCP, FCP, and AFC, allowing for rapid charging of compatible devices.

ROMOSS PEA30 Power Bank fast charging a smartphone

Image: A smartphone being fast-charged by the ROMOSS PEA30 Power Bank via its USB-C port, illustrating the speed difference compared to standard charging.

  • 30W Two-Way Fast Charging: The Type-C port supports both 30W input and output, enabling faster recharging of the power bank and quicker charging for your devices (2-3 times faster than traditional power banks).
  • Simultaneous Charging: You can charge up to three devices concurrently using the Type-C and two USB-A output ports.
ROMOSS PEA30 Power Bank charging three devices simultaneously

Image: The white version of the ROMOSS PEA30 Power Bank charging a smartphone, a tablet, and wireless earbuds simultaneously using its three output ports.

The 30000mAh capacity provides extended power, offering approximately 6 charges for an iPhone 13 Pro Max, 4 charges for an iPad Pro, or 7 charges for a Galaxy S21 Ultra.

ROMOSS PEA30 Power Bank 30000mAh capacity

Image: The ROMOSS PEA30 Power Bank displaying its 30000mAh capacity and estimated charges for various devices like iPhone 13 Pro Max, iPad Pro 12.9, and Samsung S21 Ultra.

Maintenance

  • Cleaning: Wipe the power bank with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To maintain battery health, fully charge and discharge the power bank at least once every three months if not in regular use.
  • Avoid Overcharging/Over-discharging: The power bank has built-in protection, but it's good practice to disconnect devices once fully charged and recharge the power bank before it completely drains.

Troubleshooting

ProblemPossible Solution
Power bank not charging or charging slowly.
  • Ensure the charging cable is securely connected to both the power bank and the power adapter.
  • Verify that the power adapter is functioning correctly and provides sufficient wattage (30W recommended for fast charging).
  • Try a different charging cable or adapter.
  • Check if the power bank's input port is clean and free of debris.
Device not charging from the power bank.
  • Ensure the power bank has sufficient charge.
  • Verify the charging cable is securely connected to both the power bank's output port and your device.
  • Try a different output port or charging cable.
  • Confirm your device is compatible with the power bank's output specifications.
Power bank gets warm during use.

It is normal for the power bank to generate some heat during charging or discharging, especially during fast charging. If it becomes excessively hot, disconnect it immediately and contact customer support.

Specifications

FeatureDetail
BrandROMOSS
ModelPEA30
Battery Capacity30000 Milliamp Hours
Special FeatureFast Charging
Connector TypeMicro USB, USB Type C, Lightning
Input PortsType-C (30W), Micro USB, Lightning
Output PortsType-C (30W), 2x USB-A (22.5W Max)
Supported ProtocolsPD3.0, QC3.0, SCP, FCP, AFC
Compatible DevicesCell phones (e.g., iPhone 14/13 Pro Max/13/12 Pro/12/12 Mini/XS, Galaxy S21 Ultra/S22), Tablets (e.g., MacBook Air/iPad Air/iPad mini 5), and all USB-C devices.
ASINB0C534GMHN

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official ROMOSS website. Keep your purchase receipt as proof of purchase for any warranty claims.

© 2024 ROMOSS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.