MESTEK IR02C-orange
Contents
MESTEK IR02C Infrared Thermometer User Manual
Model: IR02C-orange
Introduction
The MESTEK IR02C Infrared Thermometer is a versatile and precise tool designed for non-contact temperature measurement, complemented by a K-type probe for internal temperature readings. It features advanced sensors for accurate readings of surface temperature, ambient temperature, humidity, dew point, and spoilage temperature. Its ergonomic design ensures comfortable long-term use across various applications, including cooking, HVAC, automotive maintenance, and industrial settings. This manual provides detailed instructions to ensure safe and effective operation of your device.

Figure 1: MESTEK IR02C Infrared Thermometer with accessories.
Key Features
- Dual Measurement Modes: Non-contact infrared and K-type probe for versatile applications.
- Wide Temperature Range: -58°F (-50°C) to 1472°F (800°C) for infrared, 14°F (-10°C) to 932°F (500°C) for K-type probe.
- Adjustable Emissivity: Range 0.10 to 1.00 for improved accuracy on various surfaces.
- Multi-functional Display: Color LCD screen with backlight showing ambient temperature, humidity, dew point, and spoilage temperature.
- Alarm Function: Spoilage alarm mode for detecting temperature differences.
- Fast Response Time: Less than 0.5 seconds for quick readings.
- Safety Features: Non-contact measurement, EN61010-1, EN60825 & CE certified.

Figure 2: Overview of MESTEK IR02C key features.
Setup
1. Battery Installation
The MESTEK IR02C requires 2 AAA batteries (included). To install:
- Locate the battery compartment cover on the handle of the device.
- Slide the cover downwards to open the compartment.
- Insert the 2 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Slide the cover back into place until it clicks securely.
2. K-Type Probe Connection
For contact temperature measurement, connect the K-type thermocouple probe:
- Locate the probe interface port on the side of the thermometer.
- Insert the K-type probe's jack firmly into the port.
- The device will automatically switch to K-probe measurement mode or allow selection via the MODE button.

Figure 3: Device overview with battery and probe connection points.
Operating Instructions
1. Non-Contact Infrared Measurement
To measure surface temperature using the infrared sensor:
- Point the infrared sensor (front of the device) towards the target object.
- Press and hold the measurement trigger. The laser pointer will activate to indicate the measurement area.
- The temperature reading will be displayed instantly on the color LCD screen.
- Release the trigger to hold the reading on the display. The device will automatically shut off after 30 seconds of inactivity to conserve battery.

Figure 4: Non-contact measurement with 13 laser points for precision.
2. K-Type Probe Measurement
For internal temperature measurement (e.g., food, liquids):
- Ensure the K-type probe is securely connected.
- Press the MODE button until the K-probe icon is displayed on the screen.
- Insert the metal tip of the probe into the substance or object you wish to measure.
- The internal temperature will be displayed on the screen.

Figure 5: Using the K-type probe for internal temperature measurement.
3. Mode Selection and Settings
Use the MODE button to cycle through different display modes and functions:
- Surface Temperature: Default infrared measurement.
- Ambient Temperature/Humidity: Displays current room temperature and humidity.
- Dew Point/Spoilage Temperature: Provides dew point and activates spoilage alarm mode.
- Adjustable Emissivity: Allows manual adjustment of emissivity (0.10-1.00) for different materials. Use the up/down arrows to change the value.
- Unit Switch (℃/℉): Toggle between Celsius and Fahrenheit.

Figure 6: Navigating through measurement modes and settings.
4. Spoilage Alarm Mode
This mode is useful for detecting potential mold or spoilage by comparing surface temperature to ambient temperature. If the difference exceeds 5°C, an alarm will sound.

Figure 7: Spoilage alarm function for temperature difference detection.
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the thermometer in its carrying bag in a cool, dry place when not in use. Remove batteries if storing for extended periods.
- Battery Replacement: Replace batteries when the low battery indicator appears on the display.
Troubleshooting
- No Display/Power: Check battery installation and ensure batteries are not depleted. Replace if necessary.
- Inaccurate Readings:
- Ensure the target object is within the specified distance-to-spot ratio (12:1).
- Adjust emissivity setting for the material being measured.
- Ensure the K-type probe is fully inserted and making good contact.
- Laser Not Working: Check if the laser function is enabled via the MODE button.
Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 5.9 x 3.9 x 1.4 inches; 3.84 ounces |
| Item Model Number | IR02C-orange |
| Batteries | 2 AAA batteries (included) |
| Infrared Temperature Range | -58°F (-50°C) to 1472°F (800°C) |
| K-Type Probe Temperature Range | 14°F (-10°C) to 932°F (500°C) |
| Distance Spot Ratio (D:S) | 12:1 |
| Response Time | <0.5 s |
| Emissivity | Adjustable (0.10-1.00) |
| Display Type | Digital Color LCD with Backlight |
| Safety Certifications | EN61010-1, EN60825 & CE |
Safety Information
- Laser Safety: Do not stare directly into the laser beam or point it at people or animals. Laser radiation can cause eye damage.
- Not for Medical Use: This device is not a medical thermometer and should not be used to measure human or animal body temperature. It measures surface temperature only.
- Handling: Avoid dropping the device or subjecting it to strong impacts.
- Environment: Do not expose the device to extreme temperatures, humidity, or corrosive environments.

Figure 8: Important safety notice: Not for human use.
Warranty and Support
MESTEK provides 24 months after-sale service and technical support. For any issues or inquiries, please contact customer service. If the temperature gun is damaged within 24 months of purchase, contact us for a replacement.
Contact Information: Refer to the contact details provided with your purchase or visit the official MESTEK website.
Video: Official MESTEK Infrared Thermometer overview, demonstrating features and usage.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.