Philips Series 5000 S5880/20 Electric Shaver User Manual

Introduction

Thank you for choosing the Philips Series 5000 S5880/20 Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new shaver. Please read these instructions carefully before first use and keep them for future reference.

Important Safety Information

• Always check the appliance before use. Do not use the appliance if it is damaged.
• This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not immerse the shaver in water while it is connected to the power supply.
• Only use the original USB-A charging cable provided with the shaver.
• Keep the appliance and its cord away from heated surfaces.

Product Overview

Familiarize yourself with the components of your Philips Series 5000 S5880/20 Electric Shaver.

Image: The Philips Series 5000 S5880/20 electric shaver, shown alongside its USB-A charging cable and a cleaning brush. The shaver features a dark grey body with a black control panel and three rotary shaving heads.

Image: A close-up view of the three rotary shaving heads of the Philips Series 5000 S5880/20 electric shaver. The heads are designed to flex and adapt to facial contours for a close shave.

• Shaving Heads: Three flexible rotary heads for contour following.
• Power Button: To turn the shaver on and off.
• Battery Indicator: Displays remaining battery life.
• Charging Port: For connecting the USB-A charging cable.
• Protective Cap: To cover the shaving heads when not in use.
• Cleaning Brush: For manual cleaning of the shaving heads.

Setup

1. Unpacking

Carefully remove all components from the packaging. Ensure you have the shaver, USB-A charging cable, cleaning brush, and protective cap.

2. Charging the Shaver

Before first use, fully charge the shaver. The shaver is Bivolt, meaning it can operate with various voltages (100-240V).

1. Insert the small end of the USB-A charging cable into the charging port on the shaver.
2. Plug the large end of the USB-A cable into a compatible USB power adapter (not included) or a USB port on a computer.
3. The battery indicator lights will show the charging progress. A full charge typically takes approximately 1 hour and provides up to 60 minutes of shaving time.
4. Once fully charged, disconnect the shaver from the power source.

Image: A person's hands connecting the USB-A charging cable to the charging port located at the bottom of the Philips Series 5000 S5880/20 electric shaver.

Operating the Shaver

1. Powering On/Off

Press the power button once to turn the shaver on. Press it again to turn the shaver off.

2. Shaving Techniques

The Philips Series 5000 S5880/20 is designed for both dry and wet shaving.

Dry Shaving

• Ensure your face is clean and dry.
• Move the shaver in small, circular motions over your skin.
• Apply gentle pressure. The shaver's SkinIQ sensor adapts to your hair density for optimal power.
• Stretch your skin with your free hand to make the hairs stand upright.

Image: A man using the Philips Series 5000 S5880/20 electric shaver for a dry shave, moving the shaver in circular motions on his jawline.

Wet Shaving

• You can use shaving foam or gel for a more comfortable shave.
• Apply foam or gel to your face.
• Move the shaver in small, circular motions over your skin.
• Rinse the shaving heads under warm water during shaving to prevent clogging.

Image: A man using the Philips Series 5000 S5880/20 electric shaver for a wet shave, with shaving foam applied to his face, demonstrating the shaver's waterproof capabilities.

Maintenance

1. Cleaning After Each Use

Regular cleaning ensures optimal performance and hygiene.

1. Turn off the shaver.
2. Open the shaving head unit by pressing the release button (if applicable, or gently pull open).
3. Rinse the shaving heads and the hair chamber thoroughly under warm running water.
4. Use the provided cleaning brush to remove any stubborn hair particles.
5. Shake off excess water and leave the shaving head unit open to air dry.
6. Close the shaving head unit and place the protective cap on.

2. Replacing Shaving Heads

For best shaving results, replace the shaving heads every 12 months. Replacement heads are available from Philips retailers or online.

1. Turn off the shaver and disconnect it from the power supply.
2. Open the shaving head unit.
3. Remove the retaining ring by turning it counter-clockwise.
4. Take out the old shaving heads.
5. Insert the new shaving heads into the unit, ensuring they click into place.
6. Place the retaining ring back and turn it clockwise to secure the heads.
7. Close the shaving head unit.

3. Storage

Store the shaver in a cool, dry place, away from direct sunlight and extreme temperatures. Always use the protective cap to prevent damage to the shaving heads.

Troubleshooting

Specifications

• Brand: Philips
• Model: S5880/20
• Power Source: Battery powered
• Voltage: Bivolt (100-240V)
• Shaving System: Rotary shaving heads
• Special Features: SkinIQ Sensor (adapts to hair density), Wet & Dry use
• Included Components: Shaver, USB-A charging cable, Cleaning brush, Protective cap
• Suitable for: Face, Beard, Moustache, Sideburns

Warranty and Support

For warranty information, please refer to the warranty card included in your product packaging or visit the official Philips website. If you encounter any issues not covered in this manual, or require further assistance, please contact Philips customer support.

You can find contact details for Philips customer support on their official website or in the documentation provided with your shaver.