1. System Overview
The Cartell CW-SYS Dual Purpose System is a wireless driveway system designed to enhance security and provide convenient gate operation. It integrates with various security or home automation systems and automatically opens compatible powered gate operators for hands-free exit.
This system utilizes advanced magnetometer technology with adjustable sensitivity to accurately detect moving steel objects, ensuring reliable activation while minimizing false alarms. The expandable two-way radio operates on a dependable frequency, ensuring the signal reliably reaches the receiver.
Image 1: The Cartell CW-SYS Dual Purpose System, including the sensor and integrator.
2. Setup and Installation
The CW-SYS system includes a sensor, an integrator, two CR123 batteries, a terminal block screwdriver, and two auger screws for ground installation. Installation is designed to be straightforward.
2.1 Component Identification
Image 2: Contents of the Cartell CW-SYS Dual Purpose System box, showing the sensor, integrator, batteries, terminal block screwdriver, and auger screws.
2.2 Battery Installation
To install the batteries in the sensor unit, carefully remove the four screws securing the sensor's cover. Insert the two CR123 batteries into their designated slots, observing correct polarity. Replace the cover and secure the screws.
2.3 Integrator Wiring
The integrator component connects to your existing gate operator or security/home automation system. Refer to the specific manual for your automatic gate operator or security system to determine the correct wiring configuration. The provided terminal block screwdriver can assist with these connections.
2.4 Sensor Placement
The sensor should be placed within a 12-foot radius of where vehicles will drive to ensure proper detection. For optimal performance, position the sensor in a location where a vehicle will drive past it, rather than stopping directly over it. The system requires movement to trigger effectively. The sensor communicates wirelessly with the integrator, with a range of up to 1000 feet from your operator.
3. Operating Instructions
The Cartell CW-SYS system operates by detecting changes in the Earth's magnetic field caused by moving steel objects, such as vehicles. This advanced magnetometer technology ensures accurate detection and minimizes false alarms.
3.1 Vehicle Detection
When a vehicle enters or leaves the driveway and passes the sensor at a speed of at least five MPH, the system senses the magnetic disturbance.
Image 3: Illustration of a car entering the detection zone of the system.
3.2 Signal Transmission
Once a car is detected, a signal is sent wirelessly from the sensor to the integrator. This signal can be transmitted to an existing security/home automation system, a Cartell control unit, or directly to a gate operator for hands-free exit.
Image 4: Illustration of the system sending a signal upon vehicle detection.
3.3 Alert Activation and Gate Operation
Upon receiving the signal, the Cartell system can activate audible alerts, trigger cameras and lights, integrate with components of a security/home automation system, or automatically open a driveway gate for free exit.
Image 5: Illustration of the system activating alerts or gate operation.
3.4 False Alarm Prevention
The system is designed to prevent false alarms. It only detects moving steel and will not be triggered by people, animals, or blowing leaves. This ensures that if your Cartell system is activated, a vehicle is present in your driveway.
Image 6: Illustration demonstrating the system's ability to avoid false alarms from non-metallic objects or animals.
3.5 Reliable Alerts
Whether used for smart home integration, lighting activation, alarms, or gate opening, the system provides reliable alerts and functionality.
Image 7: Illustration of the system providing reliable alerts and integrating with various home systems.
4. Maintenance
4.1 Battery Replacement
The sensor unit is powered by two CR123 batteries, which offer a long operational life, typically over two years with regular use. When battery replacement is needed, follow the steps outlined in Section 2.2 for battery installation.
5. Troubleshooting
5.1 Detection Issues
If the system is not consistently detecting vehicles, ensure that the sensor is placed in a location where vehicles are in motion when passing it. The system relies on movement within its magnetic field for activation. Verify that the sensor is within the 12-foot detection radius of the vehicle's path and within 1000 feet of the integrator.
5.2 False Activations
The Cartell CW-SYS is designed to ignore non-metallic objects and small animals. If you experience false activations, re-verify the sensor's placement to ensure it is not being affected by large, moving metallic objects other than intended vehicles.
6. Specifications
- Brand: Cartell
- Model Number: CW-SYS
- Color: Black
- Power Source: Battery Powered
- Compatible Devices: Security Panels, Home Automation Systems, Gate Operators
- Connectivity Technology: Wireless
- Alert Type: Motion
- Control Method: Touch
- Unit Count: 1.00 Count
- Installation Method: Self-Adhesive (for integrator, sensor is ground-mounted)
- Battery Cell Type: CR123 (2 required)
- Built-In Media: Sensor puck, Integrator, Auger screws, Batteries, Terminal block screwdriver
- UPC: 850039145087
7. Warranty and Support
7.1 Warranty Information
The Cartell CW-SYS Dual Purpose System comes with a 5-year warranty, providing assurance of product quality and durability.
7.2 Technical Support
For technical assistance, wiring diagrams, or any questions regarding your Cartell system, please contact Cartell Technical Support:
- Phone: 717-532-0023
- Email: info@cartell.com
You can also visit the Cartell Store on Amazon for more product information and resources.
8. Official Product Video
Video 1: An overview and installation guide for the Cartell Wireless Driveway System by DIY on the House. This video demonstrates the system's components, installation process, and operational principles, highlighting its ease of use and reliability.
