1. Introduction
The NZXT Relay PC Gaming Desktop Speakers are designed to deliver high-quality audio for your gaming and multimedia needs. Featuring a bookshelf-style design, these speakers provide 80 watts of total power, high dynamic range, silk dome tweeters, and glass fiber woofers for an immersive sound experience. The enclosure is constructed from high-quality MDF to minimize resonance and distortion.
A pair of white NZXT Relay PC Gaming Desktop Speakers, showcasing their sleek design and front-facing drivers.
2. What's in the Box
- Speakers (1 pair)
3. Setup
3.1 Speaker Placement
Position the speakers on your desktop, ensuring they are equidistant from your listening position for optimal stereo imaging. The compact design allows them to fit comfortably on most desktops.
The NZXT Relay speakers positioned on a desk alongside a gaming monitor, keyboard, and mouse, illustrating their compact size within a typical PC gaming environment.
3.2 Connecting the Speakers
Connect the passive speaker to the active speaker using the provided speaker cable. Ensure correct polarity (positive to positive, negative to negative).
3.3 Power Connection
Connect the power cable to the active speaker and then plug it into a power outlet.
3.4 Audio Input Options
The NZXT Relay speakers offer multiple connectivity options:
- 3.5mm Input: Connect to devices with a 3.5mm audio jack (e.g., PC, laptop, smartphone).
- RCA Input: Connect to devices with RCA audio outputs (e.g., gaming consoles, audio interfaces).
- Bluetooth: Pair wirelessly with Bluetooth-enabled devices.
The rear panel of the active NZXT Relay speaker, clearly labeling the 3.5 mm and RCA audio input ports for versatile connectivity.
4. Operating Instructions
4.1 Power On/Off
To power on the speakers, press the power button located on the active speaker. Press again to power off.
4.2 Volume Control
Adjust the master volume using the dedicated volume knob on the active speaker. The control method is touch-based.
4.3 Input Selection
Cycle through the available audio inputs (3.5mm, RCA, Bluetooth) using the input selection control on the active speaker.
4.4 Bluetooth Pairing
To pair a new Bluetooth device, activate Bluetooth pairing mode on the speakers (refer to the quick start guide for specific button presses). Then, select