1. Product Overview
The WASSERMANN 61201 is a 1/2 HP submersible utility water pump designed for efficient transfer of clean or dirty water. Constructed from durable thermoplastic, this pump is suitable for various draining applications including swimming pools, tubs, gardens, and ponds. It features a high-flow motor capable of moving up to 3300 gallons per hour (GPH) and can pump water up to 25 vertical feet. The pump is CSA certified for safety and includes a 10-foot power cord.
Figure 1: WASSERMANN 61201 Submersible Utility Water Pump.
Key Features:
- Powerful Performance: 1/2 HP motor delivers up to 3300 GPH flow rate and 25-foot vertical lift.
- Durable Construction: Made from thermoplastic composite material to prevent corrosion.
- Versatile Discharge: Features a 1-1/2" discharge with included adapters for NPT1-1/2", NPT2", and NPT3/4" hoses, along with a stainless steel hose clamp and water-stop.
- Solids Handling: Capable of handling solids up to 3/8" in size.
- Extended Reach: Equipped with a 10-foot power cord for convenient placement.
- Safety Certified: CSA certified and 100% manufacturer tested for reliability.
2. Setup Instructions
Follow these steps to properly set up your WASSERMANN 61201 submersible utility pump:
- Attach Discharge Hose: Select the appropriate adapter (NPT1-1/2", NPT2", or NPT3/4") for your hose size and securely attach it to the pump's 1-1/2" discharge outlet. Use the provided stainless steel hose clamp to ensure a tight seal.
- Submerge the Pump: Carefully submerge the pump into the water at an angle. This allows any trapped air to escape from the pump housing, ensuring proper priming and operation.
- Connect to Power: Once the pump is fully submerged and air has escaped, plug the 10-foot power cord into a standard 120V electrical outlet. The pump will begin operating immediately.
Figure 2: Connecting the discharge adapter to the pump.
Figure 3: Submerging the pump into water at an angle.
Figure 4: Plugging the pump into a 120V outlet.
3. Operating Instructions
The WASSERMANN 61201 pump is designed for straightforward operation. Simply plug it in to turn it on and unplug it to turn it off. Ensure the pump remains submerged in water during operation to prevent damage from running dry.
Typical Applications:
- Draining swimming pools and hot tubs.
- Removing water from flooded basements or areas.
- Water transfer for garden irrigation.
- Draining ponds and other water features.
Figure 5: The pump effectively draining a swimming pool.
Figure 6: The pump's wide range of applications.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your WASSERMANN 61201 pump. The removable intake screen helps prevent clogging and is easy to clean.
- Remove Intake Screen: Disconnect the pump from power. Use a screwdriver to carefully remove the screws securing the intake screen at the bottom of the pump.
- Clean Impeller and Screen: Clean any debris from the intake screen and the impeller area using a brush or water. Ensure all passages are clear.
- Reassemble: Once cleaned, reattach the intake screen and secure it with the screws.
Figure 7: Removing the intake screen.
Figure 8: Cleaning the impeller and screen.
5. Troubleshooting
If your pump is not operating as expected, consider the following common issues:
- Pump Not Starting: Ensure the power cord is securely plugged into a functional 120V outlet. Check for any tripped circuit breakers.
- Low Flow Rate: Inspect the intake screen and impeller for clogs or debris. Ensure the discharge hose is not kinked or obstructed. Verify the pump is fully submerged and air has been purged.
- Pump Running Dry: The pump is not designed to run without water. Ensure the water level is sufficient to keep the pump fully submerged during operation. Running dry can cause damage.
- Unusual Noise: Disconnect power and check for any foreign objects lodged in the impeller area.
6. Technical Specifications
Figure 9: Technical specifications overview.
| Specification | Detail |
|---|---|
| Brand | WASSERMANN |
| Model Number | 61201 |
| Power | 1/2 HP |
| Voltage | 120V |
| Maximum Flow Rate | 3300 GPH (55 Gallons Per Minute) |
| Maximum Lifting Height | 25 Feet |
| Discharge Size | 1-1/2" (with NPT1-1/2", NPT2", NPT3/4" adapters) |
| Maximum Solid Size | 3/8" |
| Power Cord Length | 10 Feet |
| Material | Thermoplastic |
| Product Dimensions (L x W x H) | 8.66" x 5.74" x 10.2" |
| Item Weight | 10.55 Pounds |
7. Warranty and Support
WASSERMANN is committed to product quality and customer satisfaction. For any questions or concerns regarding your utility pump, please do not hesitate to contact our service team. We are available to assist you within 24 hours.
Please refer to your purchase documentation for specific warranty terms and conditions.