ErGear Electric Standing Desk Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Electric Standing Desk. Please read this manual thoroughly before use to ensure proper function and safety. Keep this manual for future reference.

Safety Information

Important Safety Precautions:

• Assemble the desk in a stable location.
• Do not exceed the desk's maximum weight capacity of 80kg.
• Keep children and pets away from the desk during operation.
• Ensure no obstacles are in the path of the desk's movement (up or down).
• Do not sit or stand on the desk.
• Disconnect power before cleaning or maintenance.
• If any unusual noise or movement occurs, stop operation immediately and consult the troubleshooting section or contact customer support.

Product Features

• High Durability: Tested for 50,000 lift cycles, featuring aerospace-grade lifting column connectors for stability.
• Enhanced Motor Performance: Robust frame and reinforced motor provide superior load capacity and lifting power, supporting up to 80kg.
• Adjustable Height: Seamless height adjustment from 72cm to 118cm. Ideal for switching between sitting and standing positions.
• Memory Presets: Store up to 4 preferred height settings for quick adjustments.
• Low VOC Coating: Constructed with low Volatile Organic Compound (VOC) paint, meeting EPA and CARB emission standards for a healthier indoor environment.
• Quiet Operation: Smooth and quiet lifting mechanism minimizes distractions.
• Integrated Cable Management: Includes cable ties and a cable hole cover for an organized workspace.
• Accessory Hook: Convenient hook for hanging bags or headphones.

Package Contents

Please verify that all components are present before beginning assembly.

Image: All components of the ErGear Electric Standing Desk laid out for assembly.

Assembly Instructions

Follow these steps carefully to assemble your ErGear Electric Standing Desk. A detailed assembly video is provided below to guide you through the process.

Step 1: Attach the Lifting Frame

As shown in the video from 0:06 to 0:17, secure the lifting frame components using the provided screws. Ensure all connections are tight and stable.

Image: Illustration of attaching the desk legs to the main frame.

Step 2: Install the Brackets and Transmission Rod

Refer to the video from 0:17 to 0:43. Insert the transmission rod into the left lifting frame and secure the brackets. Ensure the left and right lifting frames are at the same height. If adjustment is needed, rotate the transmission rod clockwise to lower the left leg frame, or counter-clockwise to raise it.

Step 3: Attach the Desktop and Controller

Watch the video from 0:43 to 1:04. Carefully place the desktop onto the assembled frame. Secure it using the provided screws. Attach the control panel to the underside of the desktop.

Step 4: Connect Cables

The video segment from 1:04 to 1:12 demonstrates connecting all necessary cables to the control unit and motor. Use the provided cable management clips to keep cables tidy and prevent entanglement.

Image: Cable management clips used to organize power and control cables.

Step 5: Install Cable Hole Covers

As shown in the video from 1:12 to 1:16, insert the cable hole covers into the designated openings on the desktop for a neat finish and to protect cables.

Image: The fully assembled ErGear Electric Standing Desk, ready for use.

Operating Instructions

Adjusting Height

• Connect the desk to a power outlet.
• Use the Up (∧) and Down (∨) buttons on the control panel to manually adjust the desk height. The current height will be displayed on the panel.

Image: Close-up of the control panel with height adjustment buttons and memory presets.

Using Memory Presets

• Adjust the desk to your desired height using the Up/Down buttons.
• Press the "M" button, then press one of the numbered buttons (1, 2, 3, or 4) within 3 seconds to save the current height.
• To recall a saved height, simply press the corresponding numbered button (1, 2, 3, or 4). The desk will automatically move to the stored position.

Image: The control panel highlighting the memory preset buttons (1, 2, 3, 4).

Maintenance

• Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Cable Management: Regularly check cables for wear or damage. Ensure they are properly secured to prevent snagging during height adjustments.
• Lubrication: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by customer support.
• Inspection: Periodically inspect all screws and connections to ensure they remain tight.

Troubleshooting

If you encounter any issues with your ErGear Electric Standing Desk, please refer to the following common solutions:

If the problem persists after attempting these solutions, please contact ErGear customer support.

Specifications

• Brand: ErGear
• Model: EGESD4/5/6 Series
• Color: Vintage (Desktop) / Black (Frame)
• Size: 120 x 60 cm
• Product Dimensions: 120 (Depth) x 60 (Width) x 72-118 (Height) cm
• Weight Capacity: 80 kg
• Height Adjustment Range: 72 cm to 118 cm
• Desk Type: Standing Desk
• Base Material: Metal
• Finish Type: Painted
• Special Feature: Height Adjustable Function
• Room Type: Office

Warranty and Support

Your ErGear Electric Standing Desk comes with a 2-year manufacturer's warranty. For warranty claims, technical support, or any inquiries, please contact ErGear customer service through your purchase platform or visit the official ErGear store.

Seller: BSQ Official JP

For additional support, please visit the ErGear Store on Amazon.