Introduction
Thank you for choosing the Powell Hamilton Pewter Swivel Counter Stool. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new counter stool. This antique-inspired counter stool features a generously padded light grey upholstered seat, a sturdy metal frame in a pewter finish, and a greywash wood backrest, designed for comfort and durability.
Image: Front view of the Powell Hamilton Pewter Swivel Counter Stool, showcasing its design and upholstery.
Safety Information
- Read all instructions carefully before assembly and use.
- Keep all hardware and packaging materials out of reach of children.
- Assemble the stool on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
- Do not stand on the stool.
- Do not exceed the maximum weight capacity of 225 pounds.
- Use the stool only on a level surface.
- Avoid exposing the stool to direct sunlight or extreme temperatures to prevent material degradation.
Parts List
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, contact customer support.
| Part | Description | Quantity |
|---|---|---|
| A | Seat Assembly (with upholstered seat and swivel mechanism) | 1 |
| B | Backrest Frame (metal with greywash wood top rail) | 1 |
| C | Leg Assembly (metal frame with footrest) | 1 |
| D | Hardware Pack (bolts, washers, Allen wrench) | 1 |
Setup and Assembly Instructions
Estimated Assembly Time: 15-30 minutes. Tools Required: Included Allen wrench.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent damage.
Image: Stool components laid out on a wooden floor, ready for assembly.
- Attach Backrest to Seat: Align the holes on the backrest frame (Part B) with the corresponding holes on the back of the seat assembly (Part A). Insert the provided bolts and washers, and hand-tighten them.
Image: Rear view of the assembled stool, showing the lattice backrest and greywash wood top.
- Attach Seat Assembly to Leg Assembly: Carefully place the assembled seat and backrest onto the leg assembly (Part C). Ensure the swivel mechanism on the seat aligns with the top of the leg assembly. Secure with the remaining bolts and washers from the hardware pack (Part D). Hand-tighten all connections.
- Final Tightening: Once all parts are aligned and hand-tightened, use the included Allen wrench to fully tighten all bolts. Do not overtighten.
Image: Front view of the stool with key dimensions highlighted, including height and width.
- Inspect: Verify that the stool is stable and all connections are secure before use.
Operating Instructions
Swivel Function
The Hamilton Counter Stool features a 360-degree swivel mechanism. To operate, simply rotate the seat in any direction. The swivel mechanism is designed for smooth and quiet rotation, allowing for easy movement and conversation in various settings.
Image: Overhead view of the stool's upholstered seat and the top of the backrest, illustrating the swivel capability.
Maintenance
- Cleaning the Metal Frame: Wipe the metal frame with a dry, soft cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Cleaning the Upholstered Seat: The performance-grade fabric is designed to resist stains. For spills, blot immediately with a clean, dry cloth. For general cleaning, vacuum regularly to remove dust and debris. Spot clean with a mild fabric cleaner if necessary, following the product instructions and testing on an inconspicuous area first.
Image: Detailed close-up of the light grey upholstered fabric, showing its texture.
- Wood Care: The greywash wood backrest can be wiped with a dry or slightly damp cloth. Avoid excessive moisture.
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles or is unstable. | Loose bolts or uneven floor. | Ensure all assembly bolts are fully tightened. Move the stool to a level surface. |
| Swivel mechanism is stiff or noisy. | Lack of lubrication or debris in the mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism. Ensure no debris is obstructing movement. |
| Scratches on floor. | Missing or worn floor protectors. | Check the plastic glides on the bottom of the legs. Replace if worn or add felt pads for extra protection. |
Specifications
- Model: PAMZN2315
- Brand: Powell
- Product Dimensions: 18.5"D x 18.5"W x 41.77"H
- Seat Height: 24.5"H (suitable for counter heights of 35" to 39" high)
- Color: Pewter & Light Grey
- Style: Antique
- Maximum Weight Recommendation: 225 Pounds
- Assembly Required: Yes
- Item Weight: 19.62 pounds
- UPC: 081438787992
Image: A diagram illustrating recommended stool heights for dining chairs, counter stools, and bar stools, with corresponding table heights.
Warranty and Support
For warranty information or technical support, please contact Powell customer service. Keep your purchase receipt for any warranty claims.
Visit the official Powell website for more information: www.powellcompany.com
