Xvive P3 Bluetooth XLR Receiver User Manual

1. Introduction

The Xvive P3 is a versatile Bluetooth receiver designed to wirelessly connect your devices to professional sound systems, mixers, or amplifiers. It provides a convenient and high-fidelity audio solution for various applications, including live performances and recording sessions. This manual provides detailed instructions for setting up, operating, and maintaining your Xvive P3 receiver.

2. Key Features

• Versatile Connectivity: Connects wirelessly to any professional sound system, mixer, or amplifier via XLR.
• High-Fidelity Audio: Equipped with Bluetooth 5.0 technology for crystal-clear, low-latency audio with a range of up to 30 meters (100 feet).
• Easy to Use: Compact and intuitive design allows for quick and easy device connection without cables or adapters.
• Long Battery Life: Features a rechargeable battery providing up to 8 hours of continuous operation on a single charge.
• Stereo Playback: Easily create a wireless stereo setup by linking two P3 adapters together.

3. Setup Guide

Follow these steps to set up your Xvive P3 Bluetooth receiver:

3.1 Initial Power On and Connection

1. Charge the Device: Before first use, ensure the P3 is fully charged using the provided USB Type-C cable. The red LED indicates charging, and it will turn off when fully charged.
2. Power On: Press and hold the power button on the P3 until the red LED illuminates, indicating the unit is on. The blue LED will flash, signifying it's in pairing mode.
3. Connect to Mixer/PA: Plug the XLR end of the P3 directly into an available XLR input on your audio mixer, active PA speaker, or DJ system.
4. Pair with Device: On your Bluetooth-enabled device (smartphone, tablet, laptop), search for available Bluetooth devices and select "Xvive P3" to pair. The blue LED on the P3 will become solid when successfully paired.

3.2 Video Guide: Initial Setup

Watch this official video for a visual demonstration of the Xvive P3's setup and basic functionality:

4. Operating Instructions

4.1 Mono Connection

For mono audio output, simply connect one Xvive P3 receiver to a single XLR input on your mixer or PA system. The P3 will receive the Bluetooth audio signal and output it through the connected XLR channel.

4.2 Stereo-Link Function

The Xvive P3 supports a Stereo-Link function, allowing you to use two P3 units to create a wireless stereo audio setup. This is ideal for applications requiring distinct left and right audio channels, such as connecting to two separate PA speakers for a wider soundstage.

1. Prepare Two P3 Units: Ensure both Xvive P3 units are powered on and not currently paired with any Bluetooth device.
2. Activate Stereo-Link: On one P3 unit, press and hold the "Stereo-Link" button (indicated by a chain link icon) until its LED flashes rapidly. Do the same for the second P3 unit.
3. Pairing: The two P3 units will automatically search for and link with each other. Once linked, one unit will act as the master (left channel) and the other as the slave (right channel). Their LEDs will indicate a successful link.
4. Connect to Audio System: Plug the master P3 into the left XLR input of your mixer or PA system, and the slave P3 into the right XLR input.
5. Pair with Source Device: Now, pair your Bluetooth audio source device (smartphone, laptop) with the master P3 unit. Audio will be streamed in stereo across both linked P3s.

5. Maintenance

5.1 Battery Charging

The Xvive P3 features a built-in rechargeable Lithium Polymer battery. To charge the device, connect the provided USB Type-C cable to the charging port on the P3 and the other end to a standard USB power adapter (not included) or a computer's USB port. The red LED will illuminate during charging and turn off when the battery is full. A full charge provides up to 8 hours of continuous use.

5.2 General Care

• Keep the device dry and away from extreme temperatures.
• Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Avoid dropping the device or subjecting it to strong impacts.

6. Troubleshooting

If you encounter issues with your Xvive P3, try the following solutions:

• No Power: Ensure the device is fully charged. Connect it to a USB power source and check if the red charging LED illuminates.
• Cannot Pair:
  • Make sure the P3 is powered on and the blue LED is flashing (pairing mode).
  • Ensure Bluetooth is enabled on your source device and it's within the 30-meter range.
  • Forget the device from your source device's Bluetooth settings and try pairing again.
  • Restart both the P3 and your source device.
• No Audio Output:
  • Verify the P3 is successfully paired (solid blue LED).
  • Check the volume levels on both your source device and the mixer/PA system.
  • Ensure the P3 is securely plugged into the XLR input.
  • If using Stereo-Link, ensure both units are properly linked and the master unit is paired with your source device.
• Intermittent Audio/Poor Quality:
  • Reduce the distance between the P3 and your Bluetooth source device.
  • Minimize obstacles (walls, large metal objects) between the devices.
  • Avoid strong electromagnetic interference from other electronic devices.

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the official Xvive website or contact their customer service. Keep your purchase receipt for any warranty claims.