Introduction
This manual provides essential information for the safe and efficient use of your Zafferano Poldina Pro Rechargeable Cordless Table Lamp. Please read these instructions carefully before operating the device and retain them for future reference.
The Poldina Pro lamp is a modern, portable lighting solution designed for both indoor and outdoor environments, featuring touch controls for brightness and color temperature adjustment.
Safety Information
- Do not expose the charging base to water or excessive moisture.
- Use only the provided charging base and USB cable.
- Keep the lamp away from extreme temperatures and direct sunlight for prolonged periods.
- Do not attempt to disassemble or repair the lamp yourself. Contact qualified personnel for service.
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
Package Contents
Verify that all items are present in the package:
- Zafferano Poldina Pro Lamp
- Contact induction charging base with USB cable
- Instruction Manual (this document)

Image: The Zafferano Poldina Pro Lamp, a sleek, black cordless table lamp.
Setup
- Unpacking: Carefully remove all components from the packaging.
- Initial Charge: Before first use, fully charge the lamp. Place the lamp onto the included contact induction charging base. Connect the USB cable from the charging base to a suitable USB power adapter (not included). The indicator LED on the lamp will show charging status. A full charge takes approximately 6-7 hours.
- Placement: Position the lamp on a stable, flat surface. The lamp is suitable for both indoor and outdoor use due to its IP65 protection rating.

Image: The Poldina Pro lamp placed on its contact induction charging base.
Operating Instructions
The Poldina Pro lamp features intuitive touch controls located on the top of the lamp head.
Power On/Off and Dimming
- To Turn On: Lightly tap the touch control on the top of the lamp head (less than 1 second).
- To Turn Off: Lightly tap the touch control again (less than 1 second).
- To Dim: When the lamp is on, press and hold the touch control (more than 1 second). The brightness will cycle through its levels. Release your finger when the desired brightness is reached.

Image: Diagram illustrating how to turn the lamp on/off and adjust brightness using the touch control.
Adjusting Color Temperature
The Poldina Pro lamp offers three color temperature options: 2200K (Candle Light), 2700K (Warm White), and 3000K (Cool White).
- To Change Color Temperature: When the lamp is on, press and hold the touch control for more than 4 seconds. The lamp will cycle through the available color temperatures.
- To Select: Tap the touch control to select the desired color temperature (2200K, 2700K, or 3000K). Each tap will switch to the next temperature.

Image: Diagram illustrating how to change the light color temperature between 2200K, 2700K, and 3000K.

Image: Visual representation of the three adjustable color temperatures: 2200K (Candle Light), 2700K (Warm White), and 3000K (Cool White).
Maintenance
Charging the Battery
- Place the lamp on its contact induction charging base.
- Connect the USB cable from the base to a compatible USB power source.
- The lamp's electronic control system monitors battery power and indicates when recharging is needed.
- A full charge provides at least 12 hours of illumination.
Battery Replacement
The battery in the Poldina Pro lamp is replaceable. For battery replacement, please contact Zafferano customer support or an authorized service center to ensure proper installation and maintain product integrity.
Cleaning
- Ensure the lamp is turned off and disconnected from the charging base before cleaning.
- Wipe the lamp with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- For outdoor use, the IP65 rating means it is protected against dust and low-pressure water jets. However, avoid submerging the lamp in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Place the lamp on the charging base and allow it to charge for 6-7 hours. |
| Lamp does not charge. | Charging base not connected or faulty. | Ensure the USB cable is securely connected to both the charging base and a working USB power adapter. Try a different USB port or adapter. |
| Light flickers or is dim. | Low battery or lamp is in dimmest setting. | Charge the lamp. If fully charged, adjust brightness using the touch control. |
| Cannot change color temperature. | Incorrect touch control gesture. | Press and hold the touch control for more than 4 seconds to initiate color temperature change, then tap to cycle. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Poldina Pro Lamp |
| Model Number | LD0340D4 |
| Brand | Zafferano |
| Light Source Type | LED (SMD) |
| Total Power | 2.2 W |
| Color Temperatures | 2200K, 2700K, 3000K |
| Battery Life | At least 12 hours |
| Recharge Time | 6-7 hours |
| Control Method | Touch |
| Indoor/Outdoor Usage | Outdoor (IP65 rated) |
| Dimensions | 4.33"D x 4.33"W x 14.9"H |
| Item Weight | 3 Pounds |
| Material | Metal (Powder Coated) |
| Included Components | Contact induction charging base with USB |

Image: Technical diagram detailing the dimensions and lighting specifications of the Poldina Pro Lamp.
Warranty Information
For detailed warranty information, please refer to the official Zafferano website or contact their customer service. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Customer Support
If you encounter any issues or have questions not covered in this manual, please visit the official Zafferano website for support resources, FAQs, and contact information.
Official Zafferano Website: www.zafferanoamerica.com





