Zafferano Poldina Pro Rechargeable Cordless Table Lamp Instruction Manual

Introduction

The Zafferano Poldina Pro is a versatile rechargeable cordless table lamp designed for both indoor and outdoor use. It features intuitive touch controls for power, dimming, and color temperature adjustment, providing flexible lighting for various environments. This manual will guide you through the setup, operation, and maintenance of your Poldina Pro lamp to ensure optimal performance and longevity.

Key Features:

• Modern and Essential Design: Constructed with a powder-coated finish, polycarbonate diffuser, and LED light source.
• Touch Control: Easily switch on/off, adjust brightness, and select light color temperature (2200K, 2700K, 3000K) with a touch.
• Rechargeable and Replaceable Battery: Offers at least 12 hours of illumination on a 6-7 hour charge, with a contact charging base included.
• Battery Charge Monitoring: An electronic control system indicates remaining battery power and charging status to prevent overloads.
• Usable Outdoors: High protection index (IP65) makes it suitable for outdoor environments.

What's in the Box

Upon unboxing your Zafferano Poldina Pro lamp, ensure all components are present:

• Zafferano Poldina Pro Lamp
• Contact Induction Charging Base
• USB Cable

Image: Poldina Pro lamp with its contactless charging base and USB cable.

Setup

1. Unpack: Carefully remove the Poldina Pro lamp, contact induction charging base, and USB cable from the packaging.
2. Connect Charger: Connect the USB cable to the contact induction charging base and plug the other end into a suitable USB power adapter (not included) or USB port.
3. Initial Charge: Place the Poldina Pro lamp onto the charging base. The lamp's indicator light will show red when charging and turn green when fully charged. For optimal battery life, ensure a full charge before first use (approximately 6-7 hours).

Operating Instructions

1. Power On/Off: Lightly tap the touch control located on the top of the lamp's head to turn the lamp on or off.
2. Adjust Brightness (Dimming): While the lamp is on, press and hold the touch control. The light will gradually dim or brighten. Release your finger when the desired brightness level is reached.
3. Change Color Temperature: To cycle through color temperatures (2200K - warm, 2700K - neutral, 3000K - cool), ensure the lamp is off. Press and hold the touch control until a blue light appears, then tap to cycle through the color modes. Once the desired color is selected, press and hold again to save the setting.

Image: Illustration of the touch control for turning the lamp on/off and dimming.

Image: Illustration of the touch control for selecting between 2200K, 2700K, and 3000K color temperatures.

Maintenance

• Cleaning: Wipe the lamp with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• Battery Care: To prolong battery life, avoid leaving the lamp on the charging base once the green indicator light shows a full charge. Fully discharge and recharge the battery periodically if the lamp is not used for extended periods.
• Outdoor Use: The lamp has an IP65 rating, making it suitable for outdoor use and resistant to splashes. However, avoid submerging it in water.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Zafferano America website. Keep your proof of purchase for any warranty claims.

Zafferano America is committed to providing high-quality products and excellent customer service. If you encounter any issues not covered in this manual, please contact their support team for assistance.