Brightown HLS-W-XXXWW-S

Download PDF
Contents

Brightown Solar Garden Lights Outdoor Instruction Manual

Model: HLS-W-XXXWW-S

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Brightown Solar Garden Lights Outdoor. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

Brightown Solar Garden Lights illuminating a garden at night

Image: Brightown Solar Garden Lights with golden engraved balls, creating a warm ambiance among green foliage in a garden setting.

Package Contents

Verify that all components are present in the package:

  • 4 x 10 LED Solar Outdoor Lights (Moroccan design)
  • 4 x Ground Stakes
  • 1 x User Manual (this document)

Setup

Follow these steps to set up your solar garden lights:

  1. Unpack Components: Carefully remove all items from the packaging.
  2. Assemble the Light: Attach the ground stake to the bottom of each solar light unit. Ensure it is securely fastened.
  3. Select Location: Choose an outdoor location that receives direct sunlight for at least 6-8 hours daily. Avoid areas under trees, eaves, or other obstructions that may shade the solar panel.
  4. Activate the Light: Locate the power switch on the back or bottom of the solar panel. Slide the switch to the "ON" position for continuous illumination or "FLASH" for a blinking effect.
  5. Install in Ground: Gently push the assembled light into the ground. Ensure the solar panel is positioned to face the sun directly.
  6. Initial Charge: Allow the lights to charge for a full day (6-8 hours) in direct sunlight before their first use at night.
Diagram showing solar light charging during the day and automatically lighting up at night

Image: Illustration demonstrating the intelligent light control system, showing solar lights charging during the day and automatically turning on at dusk.

Operating Instructions

Your Brightown Solar Garden Lights are designed for automatic operation:

  • Automatic On/Off: Once activated and fully charged, the lights will automatically turn on at dusk and turn off at dawn.
  • Lighting Modes: The lights offer two lighting modes. Use the switch on the solar panel to select between:
    • Steady On: Provides continuous warm white illumination.
    • Flash: Creates a twinkling or blinking effect.
  • Swaying Feature: The flexible stems allow the lights to sway gently with the wind, creating a dynamic visual effect.
  • Solar Panel Adjustment: The solar panel can be adjusted up to 120 degrees to optimize exposure to direct sunlight.
Image showing a child observing solar garden lights in a forest setting, illustrating two lighting modes

Image: A visual representation of the two available lighting modes: 'Steady On' for continuous illumination and 'Flash' for a twinkling effect.

Diagram illustrating the swaying motion of the solar lights and a comparison of solar panel and battery specifications

Image: Illustration showing how the flexible stems of the solar lights sway with the breeze.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your solar lights:

  • Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
  • Battery Care: The built-in Ni-MH battery is designed for longevity. If the light output diminishes significantly over time, ensure the panel is clean and receiving adequate sunlight. Battery replacement is generally not required for the product's expected lifespan.
  • Weather Resistance: The lights are IP65 waterproof, designed to withstand rain, snow, and wind. However, during extreme weather conditions (e.g., hurricanes, blizzards), it is advisable to bring the lights indoors to prevent potential damage.
  • Inspect for Damage: Regularly check the lights and stakes for any physical damage. Replace any broken components if necessary.
Icons representing the all-weather resistant features of the solar garden lights

Image: Icons highlighting the anti-aging, snowproof, waterproof (IP65), and windproof features, demonstrating the lights' resilience in various weather conditions.

Troubleshooting

If your solar lights are not functioning as expected, consider the following:

  • Light Does Not Turn On:
    • Ensure the power switch is in the "ON" or "FLASH" position.
    • Verify the solar panel is receiving direct sunlight and is not obstructed.
    • Allow for a full day's charge (6-8 hours) before expecting night operation.
  • Light is Dim or Short-Lived:
    • Clean the solar panel surface to ensure maximum light absorption.
    • Relocate the light to an area with more direct and prolonged sunlight exposure.
    • Ensure the ambient temperature is within the optimal operating range for solar charging.
  • Lights Do Not Sway:
    • Confirm there is sufficient breeze in the installation area. The stems are designed to move with natural air currents.

Specifications

FeatureSpecification
Model NumberHLS-W-XXXWW-S
Light ColorWarm White
Waterproof GradeIP65
Charging Time4-6 hours (direct sunlight)
Running Time10-12 hours (after full charge)
Solar Panel Rotation Angle120 degrees
Working ModesSteady On, Flash
Battery Type1.2V, 600mAh Ni-MH
MaterialStainless Steel, Acrylonitrile Butadiene Styrene
Power SourceSolar Powered
Voltage1.2 Volts
Number of Light Sources40 LEDs (10 LEDs per light, 4-pack)

Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact the seller directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.