FITHOOD Battery Replacement for Sena SRL-01, GT-Air II, SHOEI Neotec II, J-Cruise II, SRL2 Headsets (800mAh/3.7V) - User Manual

1. Product Overview

This manual provides essential information for the safe and effective use of your FITHOOD replacement battery. This high-quality Li-Polymer battery is designed to replace the original battery in compatible Sena and SHOEI wireless headsets, offering reliable power with a capacity of 800mAh and a voltage of 3.7V.

Image 1.1: The FITHOOD 800mAh/3.7V Li-Polymer replacement battery. This image shows the compact design of the battery, suitable for integration into compatible headset models.

2. Compatibility

Ensure your device is listed below for proper compatibility. Using an incompatible battery may result in damage to your device or the battery itself.

2.1 Compatible Headset Models:

• Sena SRL-01 (SP51)
• Sena GT-Air II
• SHOEI Neotec II
• SHOEI J-Cruise II
• Sena SRL2

2.2 Compatible Battery Part Number:

• PTC802050

Note: Always verify both the model and the original battery part number before purchase and installation. If unsure, consult the manufacturer's documentation for your headset or contact support.

3. Specifications

4. Setup and Installation

Battery replacement in electronic devices requires care. If you are not comfortable performing this procedure, it is recommended to seek professional assistance.

1. Power Off Device: Ensure your headset is completely powered off before beginning the replacement process.
2. Locate Battery Compartment: Refer to your headset's original user manual to locate and access the battery compartment. This often involves removing covers or panels.
3. Disconnect Old Battery: Carefully disconnect the old battery's connector from the headset's circuit board. Avoid pulling on the wires.
4. Remove Old Battery: Gently remove the old battery. It may be secured with adhesive or a retaining clip.
5. Insert New Battery: Place the new FITHOOD battery into the compartment, ensuring proper orientation.
6. Connect New Battery: Connect the new battery's connector to the headset's circuit board. Ensure the connection is secure.
7. Secure Compartment: Reassemble any covers or panels removed earlier.
8. Initial Charge: It is recommended to fully charge the new battery before its first use.

Warning: Do not use excessive force during installation. Incorrect installation can damage the battery or your device.

5. Operating Instructions

Once installed, the FITHOOD battery operates like the original battery in your compatible headset.

• Charging: Use the original charger and charging cable provided with your headset. The battery supports standard charging protocols for your device.
• First Use: For optimal performance, fully charge the battery before its initial use.
• Usage: Operate your headset as usual. The battery's performance will be indicated by your headset's battery level indicator.
• Temperature: Avoid operating or charging the battery in extreme temperatures (below 0°C / 32°F or above 45°C / 113°F).

6. Maintenance

Proper maintenance can extend the lifespan of your battery.

• Regular Charging: Avoid completely draining the battery frequently. Charge it regularly, even if not fully depleted.
• Storage: If storing the battery for an extended period, charge it to approximately 50-60% and store it in a cool, dry place away from direct sunlight. Recharge every 3-6 months to prevent deep discharge.
• Cleaning: Keep the battery and its contacts clean and dry.
• Avoid Physical Damage: Protect the battery from drops, impacts, and punctures.

7. Troubleshooting

If you encounter issues with your new battery, consider the following:

• Battery Not Charging:
  • Ensure the battery is correctly installed and its connector is secure.
  • Verify that the charging cable and adapter are functioning correctly.
  • Check the headset's charging port for any debris or damage.
• Short Battery Life:
  • Ensure the battery has been fully charged.
  • Check for background applications or settings on your headset that might be consuming excessive power.
  • Extreme temperatures can affect battery performance.
• Headset Not Powering On:
  • Confirm the battery is fully charged and correctly installed.
  • Attempt a hard reset of your headset (refer to your headset's manual for instructions).

If problems persist after following these steps, please contact customer support.

8. Safety Information

Read and follow these safety instructions carefully to prevent injury or damage.

• Do Not Disassemble: Never attempt to disassemble, open, or service the battery.
• Avoid Puncture/Impact: Do not puncture, crush, or subject the battery to strong impacts.
• Keep Away from Heat: Do not expose the battery to heat sources, direct sunlight, or high temperatures (e.g., inside a hot car).
• Avoid Water: Do not immerse the battery in water or other liquids.
• Proper Disposal: Dispose of the battery according to local regulations. Do not dispose of it in household waste.
• Keep Away from Children: Keep the battery out of reach of children.
• Use Correct Charger: Only use chargers specified for your headset.
• Stop Use if Damaged: If the battery appears damaged, swollen, or leaks, discontinue use immediately and dispose of it safely.

9. Warranty and Support

FITHOOD batteries are manufactured to high standards and come with standard certifications (ISO9001, RoHS, CE, UN38.3, MSDS).

For warranty information or technical support, please refer to the seller's policy or contact FITHOOD customer service through the platform where the product was purchased. When contacting support, please have your product model number (CS-SSP510SL) and purchase details ready.