Introduction
This user manual provides comprehensive instructions for the GHUST RAV315 Replacement Remote Control. Designed as a direct replacement for various Yamaha AV Receiver models, this remote offers immediate functionality without the need for complex programming or setup. Simply insert batteries and begin operation.
Product Overview
The GHUST RAV315 is a high-quality replacement remote control engineered for durability and precise control. It features an ergonomic design for comfortable grip and is made from robust ABS material.
Image: Front view of the GHUST RAV315 Replacement Remote Control, showcasing its buttons and layout.
Image: Diagram highlighting key features of the RAV315 remote, including ABS material, smart chip, and precise control.
Image: Diagram illustrating performance aspects such as stable performance, keystroke sensitivity, and farther transmitting distance.
Setup
Battery Installation
The GHUST RAV315 remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or outwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Once batteries are installed, the remote is ready for immediate use with compatible Yamaha AV receivers. No programming or additional setup is required.
Image: View of the remote's back, showing the open battery compartment and indicating the need for 2 AAA batteries.
Operating Instructions
The GHUST RAV315 remote control is designed to replicate the functions of your original Yamaha AV receiver remote. Its buttons correspond directly to the functions on your receiver.
Compatible Models
This replacement remote is compatible with a wide range of Yamaha AV Receiver models, including but not limited to:
- HTR-5490, HTR-5740, HTR-5740B, HTR-5740D, HTR-5740S, HTR-5750, HTR-5750S, HTR-5750SL, HTR-5840, HTR-5840BL, HTR-5850, HTR-5860, HTR-5860BL, HTR-5890, HTR-5890BL, HTR-5890S, HTR-5935, HTR-5940, HTR-5940BL, HTR-5950, HTR-5950BL, HTR-5960, HTR-5960BL, HTR-5990, HTR-599D, HTR-6030, HTR-6050, HTR-6060, HTR-6080, HTR-6090, HTR-6090BL, HTR-6130, HTR-6140, HTR-6150, HTR-6160, HTR-6180, HTR-6190, HTR-6230, HTR-N5060
- RAV226, RAV230, RAV232, RV659, RAV311
- RX-V461BL, RX-N600, RX-N600D, RX-V1200, RX-V1200RDS, RX-V1500, RX-V1600, RX-V1800, RX-V2700, RX-V2700BL, RX-V3300, RX-V361, RX-V363, RX-V365, RX-V365BL, RX-V3800, RX-V450, RX-V457, RX-V459, RX-V4600, RX-V461, RX-V463, RX-V463BL, RX-V550, RX-V557, RX-V559, RX-V563, RX-V565, RX-V659, RX-V663, RX-V663BL, RX-V730, RX-V730RDS, RX-V861, RX-V863
For specific functions, refer to your Yamaha AV receiver's original user manual. The buttons on the GHUST RAV315 remote are clearly labeled to match standard AV receiver controls.
Image: A hand holding the GHUST RAV315 remote control, pointing it towards a home theater setup with a television and AV receiver, demonstrating typical use.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries at the same time with new ones.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
- Avoid Damage: Do not drop the remote, expose it to extreme temperatures, or immerse it in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead or incorrectly inserted batteries. | Check battery polarity. Replace batteries with new AAA batteries. |
| Remote only controls some functions. | Remote not fully compatible with specific receiver model or function. | Verify your receiver model is listed in the compatible models section. Some advanced or unique functions may not be supported by a universal replacement remote. |
| Remote signal is weak or intermittent. | Low batteries; obstruction between remote and receiver; remote sensor on receiver is blocked. | Replace batteries. Ensure a clear line of sight to the receiver's IR sensor. Remove any obstructions. |
Specifications
- Brand: GHUST
- Model: RAV315 (Internal Model Number: 8a18ddf6-f644-45ce-89f0-3907bd6e3927)
- Connectivity Technology: Infrared (IR)
- Power Source: 2 x AAA Batteries (not included)
- Product Dimensions: 8 x 2 x 0.5 inches (approximately 20.3 x 5.1 x 1.3 cm)
- Item Weight: 3 ounces (approximately 85 grams)
- Material: High-quality ABS
- Special Feature: Ergonomic design
- Max Number of Supported Devices: 1 (specific Yamaha AV Receiver)
- Compatible Devices: Yamaha AV Receiver, Yamaha HTR series, Yamaha RX series (refer to full list in Operating Instructions)
Image: Front and back view of the remote control with dimensions overlaid, showing its length (8 inches), width (2 inches), and thickness (0.5 inches).
Warranty and Support
For any questions regarding the quality or functionality of your GHUST RAV315 Replacement Remote Control, please contact the manufacturer or seller directly. Refer to your purchase documentation for specific warranty terms and contact information.
The manufacturer is GHUST.