EDISHINE UHLFL09E Floor Lamp Instruction Manual

1. Introduction

Thank you for purchasing the EDISHINE UHLFL09E Floor Lamp. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new floor lamp. Please read these instructions thoroughly before use and retain them for future reference.

The EDISHINE UHLFL09E is a modern floor lamp featuring a wrinkled linen lampshade, stepless dimming, adjustable color temperature (2700K-6000K), and convenient control via a magnetic remote or pull-chain switch. It is designed to provide versatile lighting for various indoor environments such as living rooms, bedrooms, and offices.

The EDISHINE UHLFL09E Floor Lamp provides soft, eye-friendly LED light, ideal for reading and relaxation.

2. Safety Instructions

To ensure safe operation, please observe the following precautions:

• Always disconnect the power supply before cleaning, assembling, or replacing the bulb.
• This lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
• Ensure the lamp is placed on a stable, level surface to prevent tipping.
• Do not use bulbs exceeding the specified wattage (9W LED bulb included).
• Keep the power cord away from heat sources, sharp edges, and wet areas.
• Do not attempt to modify or repair the lamp yourself. Contact qualified service personnel for assistance.
• Keep packaging materials, especially plastic bags, away from children to prevent suffocation hazards.

3. Package Contents

Verify that all components are present before assembly:

• Lamp Base
• Lamp Pole Sections (multiple)
• Lampshade (Wrinkled Linen)
• E27 LED Dimmable Bulb (9W)
• Magnetic Remote Control
• Power Cord with Pull-Chain Switch

4. Setup and Assembly

Follow these steps to assemble your EDISHINE Floor Lamp:

1. Connect the Base: Carefully connect the bottom lamp pole section to the lamp base by screwing it clockwise until secure.
2. Assemble the Poles: Screw the remaining lamp pole sections together clockwise, ensuring each connection is tight and stable. Route the power cord through the poles as you assemble them.
3. Attach the Lampshade: Place the wrinkled linen lampshade onto the lamp socket. Secure it in place with the retaining ring by screwing it clockwise.
4. Install the Bulb: Carefully screw the provided E27 LED bulb into the bulb base until it is firmly seated.
5. Connect to Power: Plug the power cord into a suitable electrical outlet.
6. Pair the Remote Control: After powering on the lamp, press the ON/OFF key on the remote control twice within 5 seconds to pair it with the light bulb. The lamp will flash to confirm successful pairing.

Visual guide for the quick and easy assembly process of the floor lamp.

5. Operating Instructions

Your EDISHINE Floor Lamp offers multiple ways to control its lighting features:

5.1. Control Methods

• Pull-Chain Switch: A traditional pull-chain switch is located on the lamp socket for basic ON/OFF functionality.
• Magnetic Remote Control: The included 2.4G remote control provides comprehensive control over dimming, color temperature, and special modes. It can be magnetically attached to the lamp's pole for convenient storage. The remote has a control range of up to 15 meters.

The lamp can be controlled using the magnetic remote control or the integrated pull-chain switch.

5.2. Remote Control Functions

The remote control allows for precise adjustment of your lamp's settings:

Detailed layout of the remote control buttons and their respective functions.

• ON/OFF: Powers the lamp on or off.
• Max Brightness Button: Instantly sets the lamp to 100% brightness.
• Brightness +/-: Adjusts the brightness steplessly from 10% to 100%.
• Color Temperature +/-: Adjusts the color temperature steplessly from 2700K (Warm) to 6000K (Cold White).
• 3 Color Temperature Modes (K button): Cycles through preset color temperature modes (e.g., Warm, Natural White, Cold White).
• Night Light Mode: Activates a low-brightness, warm light setting for minimal illumination.
• Breastfeed Mode: Provides a soft, gentle light suitable for nighttime feeding.
• Reading Mode: Sets the light to an optimal brightness and color temperature for reading.
• Office Mode: Provides a bright, neutral light suitable for work environments.
• Auto-off After 1H (1H button): Activates a 60-minute timer, after which the lamp will automatically turn off.

The lamp offers a wide range of color temperatures and stepless dimming for customized lighting.

Utilize the Night Mode and 60-minute timer for comfortable sleep environments.

5.3. Power Failure Memory

The lamp features a power failure memory function, which means it will remember your last used brightness and color temperature settings when powered back on, eliminating the need to reset your preferred light modes each time.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your lamp:

• Cleaning: Disconnect the lamp from power before cleaning. Use a soft, dry cloth to wipe the lamp base and pole. For the lampshade, gently dust with a soft brush or cloth. Do not use abrasive cleaners or solvents.
• Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Use only E27 base LED bulbs with a maximum wattage of 9W.
• Remote Control Batteries: If the remote control's range or responsiveness decreases, replace its batteries (type not specified, typically AAA or CR2032 coin cell).

7. Troubleshooting

8. Specifications

Key dimensions of the EDISHINE UHLFL09E Floor Lamp.

9. Warranty and Support

EDISHINE provides a 1-Year Warranty for this product. If you encounter any issues or have questions regarding your EDISHINE UHLFL09E Floor Lamp, please do not hesitate to contact our customer support team. We are committed to ensuring your satisfaction.

For support, please refer to the contact information provided with your purchase or visit the official EDISHINE website.