1. Important Safety Instructions
Please read and understand all safety instructions before using your Bedsure Electric Blanket. Failure to follow these instructions may result in electric shock, fire, or injury.
- Do not use with an infant, a child, an incapacitated person, a paraplegic, a quadriplegic, a diabetic, anyone insensitive to heat, or anyone who cannot clearly understand the instructions.
- Do not use if the blanket is wet.
- Do not dry clean this product. Dry cleaning solvents may damage the insulation of the heating element.
- Do not use pins or other metallic objects with this blanket as they may damage the wiring.
- Do not use with a sofa, recliner, or other furniture that may restrict the blanket's heating wires.
- Regularly inspect the blanket, power cord, and controller for any signs of wear or damage. If any damage is found, discontinue use immediately and contact customer support.
- This blanket is equipped with an 8-hour auto shut-off feature for safety and to prevent overheating.
- The Bedsure Electric Blanket is ETL and FCC certified, ensuring safer performance.

2. Product Overview
The Bedsure King Size Electric Blanket provides customizable warmth with dual controls, 10 heating levels, and 10 timer settings. Its soft flannel and sherpa fleece construction ensures comfort and effective heat retention.


3. Setup and Installation
- Unpack the Blanket: Carefully remove the electric blanket and its components from the packaging.
- Position the Blanket: Lay the electric blanket flat on your bed, ensuring it is evenly spread and not bunched or folded. The connectors for the controllers should be positioned near the head of the bed for easy access.
- Connect the Controllers: For King size blankets, two controllers are provided. Connect each controller securely to the corresponding connector on the blanket. Ensure the connection is firm.
- Plug into Power: Plug the power cords from each controller into a standard 120V AC, 60Hz wall outlet. Avoid using extension cords or power strips.


4. Operating Instructions
Your Bedsure Electric Blanket features intuitive controls for personalized comfort. The King size blanket includes two independent controllers for dual-zone heating.
- Power On/Off: Press the power button on the controller to turn the blanket on or off.
- Adjust Heat Settings: Use the 'TEMP+' and 'TEMP-' buttons to select one of the 10 available heating levels. The current heat level will be displayed on the controller screen.
- Set Timer: Use the 'TIME+' and 'TIME-' buttons to set the desired operating time, from 1 to 10 hours. The blanket will automatically shut off after the set time.
- Preheat Function: Press the 'PREHEAT' button to quickly warm your bed before use. The preheat function will bring the blanket to a comfortable temperature and then maintain it.
- Dual Control: Each controller operates its respective side of the King size blanket independently, allowing two users to customize their warmth settings.


5. Care and Maintenance
Proper care will extend the life of your Bedsure Electric Blanket. Always follow these instructions carefully.
- Disconnect Power: Before cleaning, always unplug the blanket from the wall outlet and disconnect the controllers from the blanket.
- Machine Wash: The blanket is machine washable. Wash on a gentle cycle with cold water. Do not bleach.
- Tumble Dry: Tumble dry on low heat or air dry. Ensure the blanket is completely dry before reconnecting the controllers or storing. Do not iron.
- Storage: When not in use, store the blanket in a cool, dry place. Avoid folding it tightly or placing heavy objects on it, which could damage the heating wires.
6. Troubleshooting
If you experience issues with your Bedsure Electric Blanket, please refer to the following common solutions:
- Blanket Not Heating:
- Ensure the power cord is securely plugged into a working wall outlet.
- Verify that the controller is firmly connected to the blanket.
- Check if the power button on the controller has been pressed and a heat setting is selected.
- Confirm that the auto shut-off timer has not expired.
- Controller Display Not Working:
- Unplug the blanket from the wall outlet for a few minutes, then plug it back in to reset the controller.
- Ensure the power cord and controller connection are secure.
- Error Codes: If an error code appears on the controller display, unplug the blanket, wait a few minutes, and then reconnect. If the error persists, contact customer support.
If these steps do not resolve the issue, please contact Bedsure customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | BS-500B-S |
| Size | King (100"L x 90"W) |
| Material | 100% Polyester |
| Heating Levels | 10 |
| Timer Settings | 10 (1-hour intervals) |
| Auto Shut-off | 8 Hours |
| Power Input | 120V AC, 60Hz |
| Controller Power | Dual 110W Controllers |
| Included Components | 1 Electric Blanket, 2 Controllers |
| Certifications | ETL, FCC |
8. Warranty and Support
Bedsure is committed to providing high-quality products. For warranty information, product support, or any questions not covered in this manual, please contact Bedsure customer service. Our team is available to assist you with any concerns.
You can typically find contact information on the Bedsure official website or on the product packaging.
9. Versatile Use Cases
The Bedsure Electric Blanket is designed for various situations to provide warmth and comfort:
- Bedtime Comfort: Use it on your bed for a warm and cozy night's sleep.
- TV Relaxation: Wrap yourself in warmth while watching television on the sofa.
- Morning Warm-up: Ideal for staying warm during chilly mornings.
- Work From Home Comfort: Maintain comfort while working or studying from home.
