Magichome Adjustable Shower Head Holder Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Magichome Adjustable Shower Head Holder, Model M-H-1. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Product Features

• Adjustable Design: Compatible with round shower riser rails from 19mm to 25mm in diameter. Height adjustment is tool-free.
• 180° Rotation: Allows for angle adjustment of the shower head to suit user preference.
• High-Quality Material: Constructed from durable, chrome-plated ABS material, offering rust resistance and extended lifespan.
• Secure Hold: Designed to securely hold shower heads, including heavier filter shower heads, preventing slippage.
• Easy Installation: No tools required for installation; the shower bar does not need to be disassembled.

Package Contents

Verify that all components are present before proceeding with installation:

• 1 x Magichome Adjustable Shower Head Holder (Model M-H-1)

Setup and Installation

Follow these steps for proper installation of the shower head holder:

1. Compatibility Check: Ensure your shower riser rail has a diameter between 19mm and 25mm (0.75-0.9 inches).
   

   Image: The shower head holder is designed for riser rails with a diameter between 19mm and 25mm. The top opening is 22mm and the bottom is 20mm.
2. Prepare for Installation: No need to disassemble your existing shower slide bar.
   

   Image: This illustration demonstrates that the shower head holder can be installed without disassembling the shower riser rail. Simply open the holder and attach it to the rail.

3. Attach the Holder: Open the holder and position it around the shower riser rail. Close the holder securely.
4. Adjust Height: To adjust the height, turn and loosen the central part of the holder. Slide the holder up or down to the desired position, then tighten the central part to secure it.
   

   Image: This image shows how to adjust the height of the shower head holder. Turn and loosen the central part to move it up or down, then tighten to fix its position.

5. Insert Shower Head: Place your shower head into the holder. The holder is designed to accommodate universal G1/2 shower heads and hoses.

Operating Instructions

• Angle Adjustment: The shower head holder allows for 180° rotation. Gently pivot your shower head within the holder to achieve the desired spray angle.
• Height Adjustment: As described in the installation section, loosen the central part of the holder, slide it to the new height, and then tighten it to secure.

Maintenance

To ensure the longevity and appearance of your Magichome Shower Head Holder, follow these maintenance guidelines:

• Cleaning: Clean the holder regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the chrome finish.
• Inspection: Periodically check the holder for any signs of wear or damage. Ensure the tightening mechanism operates smoothly and securely.

Troubleshooting

Specifications

Image: This image provides a detailed view of the shower head holder's dimensions, including its length (11.5 cm / 4.52 in) and width (4 cm / 1.6 in), and the 19-25mm compatibility for the riser rail.

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Magichome customer service through the retailer where the product was purchased. Please have your model number (M-H-1) and purchase date available when contacting support.