Elvie Double Wearable Breast Pump with App Instruction Manual

1. Product Overview

The Elvie Double Wearable Breast Pump is designed for discreet, hands-free milk expression. This system allows users to pump milk in various environments, offering portability and quiet operation. It integrates with a mobile application for enhanced control and monitoring.

Key Features:

• Wearable Design: Smallest and lightest for discreet, in-bra use.
• Quiet Operation: Utilizes Piezo pumps for minimal sound during use.
• App Control: Monitor milk volume, track pumping history, and adjust settings via a smartphone application.
• Automated Functionality: Infrared sensors detect milk volume and automatically switch between stimulation and expression modes.
• Hands-Free: Allows for mobility during pumping sessions.

Image 1.1: The Elvie Double Wearable Breast Pump system, including two pump units, bottles, breast shields, and charging cables.

2. What's in the Box

The Elvie Double Wearable Breast Pump package includes the following components:

• 2 Pump Hubs
• 2 Bottles (5oz/150ml, BPA free)
• 2 Lids
• 2 Breast Shields (24mm)
• 2 Spouts
• 2 Valves
• 2 Seals
• 2 USB Charging Cables
• 4 Bra Adjusters
• Additional Breast Shields (one set each of 21mm and 28mm)

Image 2.1: All components of the Elvie Double Wearable Breast Pump laid out, illustrating the contents of the package.

3. Safety Information

As with any baby product, keep the pump and accessories out of reach of children to avoid potential choking hazards or injury.

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

4. Setup and Assembly

4.1 Component Identification

Image 4.1: Labeled diagram of the Elvie Pump, showing the hub, bottle, breast shield, button, and charging port.

4.2 Assembly Steps

1. Wash your hands thoroughly with soap and water before handling the pump or any breast milk.
2. Assemble the pump according to the manufacturer's instructions. Ensure all parts (breast shield, spout, valve, seal, bottle) are properly fitted and secure.
3. Position the breast shield over each nipple, ensuring it fits snugly but not too tightly around the areolas.

4.3 Breast Shield Sizing

Selecting the correct breast shield size is crucial for comfort and efficient milk expression. Measure the width of the base of your nipple with a ruler to determine the appropriate size. Elvie Pump includes 21mm, 24mm, and 28mm breast shields.

Image 4.2: Guide on how to measure your nipple base for selecting the correct breast shield size.

Note: Nipple Cushions are sold separately.

5. Operating Instructions

5.1 Pumping Process

1. Turn on the pump and adjust the suction and speed settings to your comfort level. It is recommended to start with a lower suction and gradually increase as comfortable.
2. As the pump creates a vacuum, it will stimulate milk release. Milk should flow through the breast pump into the attached bottle.
3. Once you have achieved 2 or 3 let-downs, you may switch to the other breast and repeat the process, or continue pumping both simultaneously if using two pumps.
4. Pump for approximately 30 minutes from both breasts combined, or as advised by a lactation consultant.
5. When finished, turn off the pump and carefully disassemble it.

5.2 Discreet Use

The Elvie Pump's compact design allows it to be worn inside a standard nursing bra, providing discretion during use.

Image 5.1: A user demonstrating the discreet fit of the Elvie Pump when worn inside a bra.

5.3 App Control and SmartRhythm Pumping

The Elvie Pump connects to a mobile application, allowing users to control the pump, monitor milk volumes in real-time, and track pumping history. The app also provides access to SmartRhythm pumping modes for personalized expression.

Image 5.2: The Elvie app interface, displaying session duration, milk volume, and control options for the pump.

SmartRhythm Modes:

• Multi-Switch: Designed for power pumping sessions.
• Express and Collect: Suitable for managing heavy let-downs.
• Slow and Gentle: Provides a softer suction for sensitive nipples.

Image 5.3: Visual representation of the SmartRhythm pumping technology, highlighting different modes for optimized milk output.

6. Cleaning and Maintenance

Proper cleaning and maintenance are essential for hygiene and the longevity of your Elvie Pump.

1. After each pumping session, disassemble the pump according to the manufacturer's instructions.
2. Rinse all breast pump parts that came into contact with milk (e.g., breast shield, spout, valve, bottle) with cold water immediately.
3. Wash these parts with hot, soapy water.
4. Rinse again thoroughly with clean water.
5. Allow the parts to air dry completely on a clean surface or pat them dry with a clean towel.
6. It is recommended to sterilize your pump parts daily, either by boiling or using a steam sterilizer. Refer to your pump's specific instructions for recommended sterilization methods.

The Elvie Pump components are made from silicone, which is durable and easy to clean.

Image 6.1: Illustration of the cleaning process for Elvie Pump components, emphasizing ease of cleaning.

7. Troubleshooting

If you encounter issues with your Elvie Pump, consider the following common troubleshooting steps:

• Low Milk Output: Ensure the breast shield is correctly sized and positioned for a proper seal. Check that all pump parts are assembled securely and that suction settings are appropriate for your comfort.
• App Connectivity Issues: Verify that Bluetooth is enabled on your smartphone and that the Elvie app is updated to the latest version. Ensure the pump hubs are charged.
• Milk Leakage/Spillage: Confirm that all components are correctly assembled and sealed. Ensure your bra provides adequate support to hold the pump firmly against your breast, maintaining a consistent seal. Avoid leaning forward excessively during pumping.
• Pump Not Turning On/Charging: Check that the USB charging cable is properly connected to both the pump hub and a power source. Allow sufficient time for charging.

For persistent issues, refer to the official Elvie support resources or contact customer service.

8. Product Specifications

Image 8.1: Side and front views of the Elvie Pump, illustrating its compact dimensions and internal structure.

9. Warranty and Support

9.1 Warranty Information

The Elvie Pump typically comes with a 2-year warranty. Please refer to the official Elvie website or your purchase documentation for specific warranty terms and conditions, as these may vary by region and retailer.

9.2 Customer Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official Elvie website or contact their customer service department directly. Contact details can usually be found on the product packaging or the manufacturer's website.