1. Introduction
The Vissco Pneumatic Walker Boot is designed to provide maximum support and stability to the ankle. It is lightweight and durable, featuring a rocker sole design that promotes a natural gait. The front panel includes an inflated air cell for complete protection and support, aiding in pressure offloading and enhancing blood flow.
Figure 1: Side view of the Vissco Pneumatic Walker Boot.
2. Key Features
- Maximum Support and Stability: Engineered to provide comprehensive support to the ankle.
- Lightweight and Durable: Constructed from materials that ensure both ease of use and longevity.
- Rocker Sole Design: Facilitates a natural walking motion, reducing strain.
- Pneumatic Air Cell: A front panel with an inflatable air cell offers complete protection, support, pressure offloading, and improved blood flow.
- Single Air Valve: Allows for customized pneumatic compression to promote callus formation over fracture sites and reduce swelling.
- Detachable Soft Cushion: Provides a comfortable and secure fit.
- Anti-Skid Groove: The sole features an anti-skid groove for enhanced traction and safety.
- Extra Foam Padding: For additional comfort and cushioning.
- Soft, Breathable Fabric: Ensures comfort during prolonged wear.
- Medical-Grade Velcro: Secure and adjustable fastening.
- Ambidextrous Design: Fits both left and right feet.
Figure 2: Air bladder for uniform compression, stabilization, comfort, and swelling reduction.
Figure 3: Anti-skid groove on the sole and extra foam padding for comfort.
Figure 4: Rocker-bottom sole design for natural gait.
Figure 5: Details on fabric, Velcro, and left/right foot compatibility.
3. Intended Use
The Vissco Pneumatic Walker Boot is intended for use in cases of:
- Ankle fracture
- Grade II/III Ankle sprain / strain
- Fracture of fibula, talus, or calcaneus
- Medial/lateral malleolus fracture
- Post ligament, soft tissue, and tendon surgery
- Forefoot or Midfoot injury
- Post cast removal
4. Sizing Information
To ensure proper fit and effectiveness, please refer to the size chart below:
Figure 6: Size chart for Vissco Pneumatic Walker Boot.
| Size | UK Shoe Size | EUR Shoe Size |
|---|---|---|
| Small | 4-6 | 36-39 |
| Medium | 7-9 | 40-44 |
| Large | 10-12 | 44-46.5 |
| Extra Large | 12 & above | 46.5 & above |
5. Material Specifications
The Vissco Pneumatic Walker Boot is constructed from the following materials:
- Front panel: High Density polyethylene
- Inflation pumps: Thermoplastic polyurethane
- Outer Sole / Insole: EVA / Rubber
- Liner: Three-layer Laminated Breathable material
- Straps: Nylon Velcro strap, re-applicable for reverse buckle straining mechanism for easy application.
6. Setup and Application
To apply the Vissco Pneumatic Walker Boot:
- Ensure the detachable soft cushion liner is correctly placed inside the boot.
- Open all Velcro straps on the boot.
- Place your foot and lower leg into the boot, ensuring your heel is seated firmly at the back.
- Secure the straps, starting from the bottom (foot) and moving upwards (calf). Ensure they are snug but not overly tight to maintain circulation.
- Locate the single air valve (typically a push button) on the boot. Press the button to inflate the air cell to your desired compression level. This provides additional support and comfort. Do not over-inflate.
- To deflate, locate the release valve (if separate from the inflation button) or press and hold the inflation button to release air.
7. Operating Instructions
Once the Vissco Pneumatic Walker Boot is securely applied:
- The rocker sole design is engineered to promote a natural and comfortable gait. Walk carefully, allowing the boot's design to assist your movement.
- Adjust the pneumatic compression as needed throughout the day to maintain comfort and support. If swelling increases or decreases, adjust the air cell accordingly.
- Always consult with your healthcare professional regarding the duration of wear and specific activity restrictions while using the walker boot.
8. Maintenance and Care
Proper care will extend the life of your Vissco Pneumatic Walker Boot:
- Cleaning the Liner: Remove the liner from the boot. Hand wash it in normal water with a mild detergent.
- Cleaning the Shell: Wipe the hard shell of the boot with a damp cloth.
- Drying: Allow the liner to air dry completely before reapplying it to the boot. Dry in the shade on a flat surface. Do not machine wash, tumble dry, iron, or bleach.
- Storage: Store the boot in a cool, dry place away from direct sunlight when not in use.
9. Specifications
| Specification | Detail |
|---|---|
| Product Dimensions (LxWxH) | 28 x 18 x 28 Centimeters |
| Item Weight | 1.4 Kilograms (1 kg 400 g) |
| Model Number | 5721S |
| Included Components | 1 Walker Boot |
| Generic Name | Walker Boot |
| Closure Type | Hook, Loop (Velcro) |
| Special Features | Lightweight |
| Material Type | Nylon, Plastic |
| Colour | Black |
| Age Range (Description) | Adult |
| Country of Origin | India |
10. Troubleshooting
No specific troubleshooting information is provided for this product. If you experience any issues or discomfort, please consult your healthcare professional or contact Vissco customer support.
11. Manufacturer Contact Information
For any queries or support, please contact:
- Manufacturer: Vissco Rehabilitation Aids Private Limited
- Email: customercare@vissco.com
- Contact: +912243330375, +912243330333