SVAKOM Pulse Air Pressure Vibrator User Manual

1. Important Safety Information

Please read all instructions carefully before using the SVAKOM Pulse Air Pressure Vibrator. Retain this manual for future reference.

• This product is intended for adult use only.
• Consult a healthcare professional before use if you have any medical conditions, are pregnant, or have a pacemaker.
• Discontinue use immediately if you experience any discomfort, pain, or irritation.
• Do not use on swollen, inflamed, or broken skin.
• Keep out of reach of children.
• Use only water-based lubricants with this product. Avoid silicone-based lubricants, as they may damage the silicone material.
• Do not disassemble the device. This will void the warranty.
• Dispose of the battery and device according to local regulations.

2. Product Overview

The SVAKOM Pulse is an innovative air pressure vibrator designed for pleasure. It features body-safe silicone and multiple stimulation modes.

Components:

• Stimulation Head (Air Pressure & Vibration)
• Control Buttons (Power, Mode, Intensity)
• Charging Port

Image 2.1: Side view of the SVAKOM Pulse, highlighting the ergonomic shape and control buttons.

Image 2.2: View of the SVAKOM Pulse, illustrating the charging port location and regulatory symbols.

Image 2.3: Another perspective of the SVAKOM Pulse, focusing on the stimulation head and control layout.

3. Setup

3.1 Initial Charging

Before first use, fully charge your SVAKOM Pulse. Connect the provided USB charging cable to the charging port on the device and plug the other end into a USB power source (e.g., computer, wall adapter). The indicator light will show charging status and turn solid when fully charged. A full charge typically takes 2-3 hours.

3.2 First-Time Cleaning

Clean the device thoroughly before its initial use. Refer to the 'Maintenance' section for detailed cleaning instructions.

4. Operating Instructions

4.1 Power On/Off

• To power on: Press and hold the power button (usually marked with a circle or 'S') for 2-3 seconds until the device vibrates or the indicator light turns on.
• To power off: Press and hold the power button for 2-3 seconds until the device stops or the indicator light turns off.

4.2 Changing Modes and Intensities

The SVAKOM Pulse features various vibration and air pressure patterns. Use the dedicated mode and intensity buttons to cycle through these settings.

• Mode Button: Press this button (often marked with a wave or 'M') to switch between different vibration and air pressure patterns.
• Intensity Buttons: Use the '+' and '-' buttons (or similar markings) to increase or decrease the intensity of the current mode.

Experiment with different modes and intensities to find your preferred settings.

5. Maintenance

5.1 Cleaning

Clean your SVAKOM Pulse after each use to maintain hygiene and prolong its lifespan.

• Wash the device with warm water and a mild, toy-safe soap.
• Rinse thoroughly to remove all soap residue.
• Dry completely with a lint-free cloth or air dry before storing.
• Do not use cleaners containing alcohol, petroleum, or acetone, as these can damage the silicone.

5.2 Storage

Store the device in a clean, dry, and cool place, away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation.

5.3 Charging

Recharge the device when the battery is low. Avoid overcharging by disconnecting the charger once the device is fully charged. Do not charge the device if it is wet.

6. Troubleshooting

• Device not turning on: Ensure the device is fully charged. Press and hold the power button for the specified duration (2-3 seconds).
• Device not charging: Check if the USB cable is securely connected to both the device and the power source. Try a different USB port or power adapter. Ensure the charging port is clean and dry.
• Weak or inconsistent vibration/air pressure: The battery might be low; recharge the device.
• Unusual noise or smell: Discontinue use immediately and contact customer support.

If you encounter issues not listed here, please refer to the 'Warranty & Support' section for assistance.

7. Specifications

8. Warranty & Support

SVAKOM products typically come with a limited warranty against manufacturing defects. For specific warranty details, registration, or technical support, please visit the official SVAKOM website or contact their customer service directly.

Please have your model number (6497) and proof of purchase ready when contacting support.