tewei OL2W4P

Download PDF
Contents

tewei 2-Layer 4-Pack Outdoor Wall Lights Instruction Manual

Model: OL2W4P

1. Introduction

Thank you for choosing tewei Outdoor Wall Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixtures. Please read these instructions thoroughly before installation and retain them for future reference.

These modern exterior wall-mount light fixtures are designed for both indoor and outdoor use, providing an up and down lighting effect. They are equipped with GU10 3000K LED bulbs, offering energy-efficient illumination. Constructed from high-quality, rugged die-casting aluminum, these lights are built for durability and weather resistance.

Four tewei 2-Layer outdoor wall lights and an example of them installed on a house exterior.

Image 1.1: tewei 2-Layer Outdoor Wall Lights and an example installation.

2. Safety Information

WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing bulbs. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).

  • Consult a qualified electrician if you are unsure about the installation process.
  • Do not install near flammable materials.
  • Ensure the fixture is securely mounted to a structural element.
  • Do not exceed the maximum wattage specified for the bulbs.
  • Wear safety glasses and gloves during installation.

3. Package Contents

Verify that all components are present before beginning installation:

  • Wall Light Fixture ×4
  • GU10 Bulb ×8
  • Mounting Hardware (screws, wire nuts)

4. Specifications

FeatureDetail
Brandtewei
Model NameOutdoor Lights (OL2W4P)
ColorBlack
MaterialAluminum
StyleModern
Light Fixture FormSconce
Product Dimensions (each)4.5"L x 4.3"W x 12"H
Indoor/Outdoor UsageIndoor/Outdoor
Power SourceCorded Electric
Installation TypeFlush Mount
Special FeatureWaterproof (IP65)
Light Source TypeLED
Finish TypePowder Coated
Number of Light Sources2 (per fixture)
Voltage110 Volts
Light ColorWarm White
Color Temperature3000 Kelvin
Wattage14 watts (total per fixture)
Bulb BaseGU10
Brightness3200 lumen (total for 4-pack)
Lighting MethodUplight & Downlight
Item Weight7.65 pounds (for 4-pack)

5. Setup and Installation

These fixtures are hard-wired and designed for easy installation. Follow these steps carefully:

  1. Turn off Power: Before starting, ensure the power supply to the installation area is completely OFF at the circuit breaker or fuse box.
  2. Prepare Mounting Surface: Ensure the wall surface is clean, dry, and structurally sound.
  3. Attach Mounting Bracket: Secure the provided mounting bracket to the junction box on your wall using the screws. Ensure the bracket is level and firmly attached.
  4. Make Electrical Connections: Connect the fixture's wires to your household wiring using the provided wire nuts.
    • Connect the black wire (Live/Hot) from the fixture to the black wire (Live/Hot) from the wall.
    • Connect the white wire (Neutral) from the fixture to the white wire (Neutral) from the wall.
    • Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire (Ground) from the wall.
    Ensure all connections are secure.
  5. Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it in place with the provided screws. Ensure there are no exposed wires.
  6. Install Bulbs: Insert the GU10 LED bulbs into the sockets.
  7. Restore Power: Once the fixture is securely installed and all connections are checked, turn the power back ON at the circuit breaker.
Diagram showing the dimensions of the light fixture, the mounting plate, and a simplified wiring diagram with wire nuts and screws.

Image 5.1: Installation components and basic wiring diagram.

Detailed wiring diagram for the outdoor wall light, showing connections for live, neutral, and ground wires.

Image 5.2: Detailed wiring connections for installation.

6. Operating Instructions

The tewei Outdoor Wall Lights operate via your standard wall switch. Once installed and power is restored, simply use the connected wall switch to turn the lights ON or OFF.

  • Light Output: The fixtures provide a warm white light (3000K) with an up and down illumination pattern.
  • Control: Controlled by a standard wall switch (not included).
Various installations of the tewei outdoor wall lights showcasing their up and down lighting effect on different house exteriors.

Image 6.1: Examples of the lighting effect in various settings.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your tewei Outdoor Wall Lights.

  • Cleaning: Clean the fixture periodically with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish. Ensure the power is off before cleaning.
  • Bulb Replacement: The fixtures use GU10 LED bulbs. To replace a bulb:
    • Turn off the power at the circuit breaker.
    • Carefully remove the old GU10 bulb by twisting it counter-clockwise and pulling it out.
    • Insert the new GU10 LED bulb by aligning the pins and pushing it in, then twisting clockwise to secure.
    • Restore power.
  • Weather Resistance: The IP65 waterproof rating ensures protection against dust and water jets. While designed for outdoor use, occasional inspection for debris or damage is recommended.
An outdoor wall light with icons indicating weather resistance: anti-rust, waterproof, windproof, and snowproof.

Image 7.1: Weather resistance features of the light fixture.

8. Troubleshooting

If you encounter issues with your tewei Outdoor Wall Lights, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on.No power supply.
Loose wiring connection.
Faulty bulb.
Check circuit breaker/fuse.
Ensure all wire connections are secure (power off first).
Replace bulb with a known working GU10 LED bulb.
Light flickers.Loose wiring.
Incompatible dimmer switch (if applicable).
Faulty bulb.
Check wiring connections (power off first).
Ensure dimmer switch is compatible with LED bulbs.
Replace bulb.
Light is dim.Incorrect bulb wattage.
Dirt/debris on fixture.
Ensure correct GU10 LED bulbs are used.
Clean the fixture (power off first).

If the problem persists after attempting these solutions, please contact customer support.

9. Warranty Information

This tewei product comes with a Limited Warranty. Please refer to the product packaging or contact tewei customer support for specific details regarding the warranty period and coverage.

10. Customer Support

For any questions, technical assistance, or warranty claims, please contact tewei customer support. We are committed to providing assistance and solutions for your product inquiries.

Please have your product model number (OL2W4P) and purchase information ready when contacting support.

© 2025 tewei. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.