Braun Series 7 71-S1000s Wet & Dry Shaver User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Braun Series 7 71-S1000s Wet & Dry Shaver. Please read these instructions thoroughly before first use and retain them for future reference.

The Braun Series 7 71-S1000s is an advanced electric shaver designed for both wet and dry use, featuring AutoSense technology to adapt to beard density and a 360° adaptive system for a smooth shave even in tricky areas.

2. Important Safety Information

WARNING: To reduce the risk of electric shock, injury, or fire, always follow these safety precautions:

• Avoid using the device near water, such as in bathtubs, showers, or sinks, unless specifically designed for wet use and disconnected from the power source.
• Allow the device to cool completely before handling after use, especially if it has been operating for an extended period.
• Do not submerge the charging stand or power cord in water or other liquids.
• Never use the shaver while it is connected to the charging cable or charging stand in a wet environment.
• Keep the appliance dry when charging.
• Do not open the appliance. Internal repairs should only be performed by authorized service personnel.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

3. What's in the Box

Your Braun Series 7 71-S1000s package typically includes the following components:

• Braun Series 7 71-S1000s Shaver
• Charging Cable / Power Cord
• Travel Case
• Cleaning Brush
• User Manual (this document)

4. Setup and Initial Use

4.1 Charging the Shaver

1. Ensure the shaver is switched off.
2. Connect the charging cable to the shaver and plug the power adapter into an electrical outlet.
3. The charging indicator lights on the shaver will illuminate to show charging progress. A full charge takes approximately 1 hour and provides up to 50 minutes of cordless shaving.
4. A 5-minute quick charge is sufficient for one full shave.
5. Once fully charged, disconnect the shaver from the power supply.

4.2 Attaching/Detaching Shaver Head (EasyClick System)

The Braun Series 7 features an EasyClick system for simple attachment and detachment of the shaver head.

Image: The EasyClick system allows for quick and easy changing of the shaver head or attachments.

1. To detach: Hold the shaver body firmly and gently pull the shaver head upwards until it clicks off.
2. To attach: Align the shaver head with the shaver body and push it down until it clicks into place.

5. Operating Instructions

5.1 General Shaving Tips

• For optimal results, shave before washing your face.
• Hold the shaver at a right angle (90°) to your skin.
• Stretch your skin and shave against the direction of beard growth.
• Apply gentle, even pressure.

5.2 Dry Shaving

The shaver can be used for a quick and convenient dry shave.

Image: The shaver is suitable for dry use, wet use with foam, or in the shower.

1. Ensure your face is clean and dry.
2. Press the power button to turn on the shaver.
3. Begin shaving as described in the general tips.

5.3 Wet Shaving (with foam/gel or in the shower)

The Braun Series 7 is 100% waterproof and can be used with shaving foam or gel, or directly in the shower for a refreshing shave.

1. Apply shaving foam or gel to your face, or wet your face thoroughly if shaving in the shower.
2. Press the power button to turn on the shaver.
3. Shave as usual. The shaver's 360° adaptation and AutoSense technology will adjust to your beard for an efficient shave.

Image: The 360° Flex head adapts to facial contours for a close shave.

Image: AutoSense technology reads beard density and adjusts power for efficient shaving.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene for your shaver.

6.1 Quick Cleaning (After each use)

1. Switch off the shaver.
2. Remove the shaver head.
3. Rinse the shaver head and the shaver under warm running water until all hair residues are removed.
4. Shake off excess water and allow the parts to air dry before reattaching the head.

6.2 Thorough Cleaning (Weekly)

1. Switch off the shaver and remove the shaver head.
2. Use the provided cleaning brush to remove stubborn hair particles from the shaver head and the inner housing of the shaver. Do not use the brush on the foil itself, as this can damage it.
3. Rinse all parts under warm running water.
4. For best results, apply a drop of light machine oil (e.g., Braun shaver oil) to the shaver foil and cutter block after cleaning to maintain cutting performance.

6.3 Replacing Shaver Parts

To maintain 100% shaving performance, replace the shaver head (foil and cutter block) every 18 months, or when worn. Replacement parts are available from Braun retailers or online.

7. Troubleshooting

If you encounter issues with your Braun Series 7 shaver, please refer to the following common solutions:

If the problem persists after trying these solutions, please contact Braun customer service for further assistance.

8. Specifications

Image: The Braun Series 7 shaver is engineered in Germany.

9. Warranty and Support

9.1 Warranty Information

Your Braun Series 7 71-S1000s shaver comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. This warranty typically covers defects in materials and workmanship under normal use.

9.2 Customer Support

For further assistance, product registration, or to inquire about replacement parts, please visit the official Braun website or contact Braun customer service in your region. Contact details can usually be found on the Braun website or in your product documentation.