WLIVE ASNG084

WLIVE Large Fabric Dresser User Manual

Model: ASNG084

Brand: WLIVE

Introduction

Thank you for choosing the WLIVE Large Fabric Dresser. This storage solution is designed to provide ample organizational space with its 10 fabric drawers and sturdy construction. Its versatile design makes it suitable for various rooms, including bedrooms, closets, living rooms, and hallways. This manual provides essential information for safe assembly, operation, and maintenance of your new dresser.

WLIVE Large Fabric Dresser in Dark Grey

Figure 1: WLIVE Large Fabric Dresser (Dark Grey)

WLIVE Large Fabric Dresser in various room settings

Figure 2: The dresser is ideal for various uses in different rooms.

Safety Information

  • Always follow assembly instructions carefully.
  • Do not overload drawers. Each drawer has a maximum load capacity of 10 lbs. The top surface has a maximum load capacity of 50 lbs.
  • Use the included anti-tilt device to secure the dresser to the wall, especially if children are present. This prevents accidental tipping.
  • Keep small parts away from children during assembly.
  • Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as needed.
  • Do not stand or climb on the dresser.
Anti-tilt device and sturdy steel frame diagram

Figure 3: Illustration of the anti-tilt device and sturdy steel frame for stability.

Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

ComponentQuantity
Steel Frame Components1 set
Wooden Top Board1
Fabric Drawers (Medium)4
Fabric Drawers (Large)6
Adjustable Feet4
Anti-tilt Device1 set
Assembly Hardware (Screws, Allen Wrench, etc.)1 set

Setup and Assembly

Assembly is required for this product. Please follow the detailed instructions provided in the package. A Phillips head screwdriver may be helpful, though an Allen wrench is typically included for most fasteners.

General Assembly Steps:

  1. Unpack all components and verify against the package contents list.
  2. Assemble the steel frame structure according to the diagrams in the provided instruction manual. Ensure all connections are secure.
  3. Attach the adjustable feet to the bottom of the frame. Adjust them to ensure the dresser is level on uneven surfaces.
  4. Place the wooden top board onto the assembled frame, securing it with the provided hardware.
  5. Assemble the fabric drawers by inserting the bottom panel and securing the handles.
  6. Insert the assembled fabric drawers into their respective slots in the frame.
  7. Install the anti-tilt device by securing one end to the dresser frame and the other to a wall stud using appropriate hardware.
Detailed view of the sturdy steel frame assembly

Figure 4: Close-up of the sturdy steel frame, highlighting its construction for stability.

High-grade fabric drawers and adjustable feet

Figure 5: Features including high-grade fabric for durability and adjustable feet for stability.

Operating Instructions

Drawer Usage:

  • Gently pull the handles to open and close the fabric drawers.
  • Distribute weight evenly within each drawer to prevent sagging or damage.
  • Avoid placing excessively heavy items in the drawers. Refer to the Specifications section for weight limits.

Top Surface Usage:

  • The wooden top surface can be used to display decorative items, lamps, or small electronics.
  • Do not exceed the maximum weight capacity of the top surface (50 lbs).
Diagram showing drawer capacity for clothing items

Figure 6: Example of drawer capacity for various clothing items.

Maintenance

  • Cleaning: Wipe the wooden top and steel frame with a dry, soft cloth. For the fabric drawers, spot clean with a damp cloth and mild detergent if necessary, then air dry. Do not use harsh chemicals or abrasive cleaners.
  • Inspection: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
  • Placement: Avoid placing the dresser in direct sunlight or near heat sources to prevent material degradation.

Troubleshooting

ProblemPossible CauseSolution
Dresser is wobbly.Loose screws; uneven floor; adjustable feet not properly set.Check and tighten all assembly screws. Adjust the leveling feet until the dresser is stable. Ensure the anti-tilt device is installed.
Drawers do not slide smoothly.Drawer is overloaded or not properly assembled.Reduce the weight in the drawer. Ensure the drawer's bottom panel is fully inserted and the drawer is correctly formed.
Strong odor from fabric drawers.New product odor.Allow the drawers to air out in a well-ventilated area for a few days before use.

Specifications

  • Brand: WLIVE
  • Model Name: ASNG084 Fabric 10 Drawer Storage Cabinet
  • Color: Dark Grey
  • Overall Dimensions (D x W x H): 11.7" x 39.4" x 39.4"
  • Item Weight: 32 pounds
  • Material: Steel Frame, Wooden Top, Fabric Drawers (Non-Woven Fabric, MDF Board)
  • Load Capacity of Table Top: 50 lbs
  • Load Capacity of Each Drawer: 10 lbs
  • Assembly Required: Yes
  • Special Features: Adjustable Feet, Safety Stop, Scratch Resistant, Anti-tilt Device
  • Room Type: Bedroom, Closet, Living Room, Hallway, Dorm, Office
Product dimensions diagram

Figure 7: Detailed product dimensions.

Product details showing load capacities and overall dimensions

Figure 8: Product details including load capacities for the top and drawers.

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact WLIVE customer service directly. Details for contacting customer service can typically be found on the WLIVE official website or through your original point of purchase.

WLIVE is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions, do not hesitate to reach out for assistance.

© 2023 WLIVE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.